Carrier-Envelope Offset Stabilized Ultrafast Diode-Pumped Solid-State Lasers

Optical frequency combs have been revolutionizing many research areas and are finding a growing number of real-world applications. While initially dominated by Ti:Sapphire and fiber lasers, optical frequency combs from modelocked diode-pumped solid-state lasers (DPSSLs) have become an attractive alternative with state-of-the-art performance. In this article, we review the main achievements in ultrafast DPSSLs for frequency combs. We present the current status of carrier-envelope offset (CEO) frequency-stabilized DPSSLs based on various approaches and operating in different wavelength regimes. Feedback to the pump current provides a reliable scheme for frequency comb CEO stabilization, but also other methods with faster feedback not limited by the lifetime of the gain material have been applied. Pumping DPSSLs with high power multi-transverse-mode diodes enabled a new class of high power oscillators and gigahertz repetition rate lasers, which were initially not believed to be suitable for CEO stabilization due to the pump noise. However, this challenge has been overcome, and recently both high power and gigahertz DPSSL combs have been demonstrated. Thin disk lasers have demonstrated the highest pulse energy and average power emitted from any ultrafast oscillator and present a high potential for the future generation of stabilized frequency combs with hundreds of watts average output power

Time and frequency offsets in all optical OFDM systems

Ultra-high-speed data transmission (terabit-per-second per channel) is urgently required in optical communication systems to fulfill the emerging demands of 3D multimedia applications, cloud computing, and bandwidth-hungry applications. In one way by using singlecarrier optical communication systems for the data transmission rates 1 Tb/s, we need the high baud rate and/or the high-order modulation formats (i.e. 512-QAM, 1024-QAM). Another way is to group the data carrying subcarriers without a guard bands (tightly spaced) to form a superchannel which gives increase in channel capacity. In a superchannel, the requirements of high-order modulation formats and high baud rates are relaxed. In an alloptical orthogonal frequency division multiplexing (AO-OFDM) system, the subcarriers are orthogonal and closely packed which gives more suitability to form superchannel. This thesis focuses on the time and frequency offsets in AO-OFDM systems. A theoretical model to investigate the performance of on-off-keying (OOK) modulated AO-OFDM system is developed for analytical simulation. The analytical (statistical) model considers the random characteristics of time and frequency offsets in adjacent subcarriers as well as the common noise sources such as shot and thermal noises to calculate the interference variances for evaluating the BER performance. The effects of time and frequency offsets on the BER performance of AO-OFDM system is evaluated with the number of optical subcarriers (NSC), receiver bandwidth (BWRX), and cyclic prefix (CP) We further develop an analytical model to evaluate the performance of AO-OFDM system with advanced modulation format (M-QAM) in the presence of time and frequency offsets, and the performance is compared with numerical simulations of other emulation setups (oddand- even subcarriers and decorrelated systems). The performance is investigated with NSC, BWRX, and CP in AO-OFDM system. A delay-line interferometer based all-optical method to reduce the effects of time and frequency offsets is proposed and evaluated. Finally, performance of demultiplexed subcarriers from an optical discrete Fourier transform (O-DFT) in AO-OFDM system in the presence of chromatic dispersion and limited modulation bandwidth is evaluated. The fiber Bragg grating (FBG) based passive device is proposed to reduce the interference and the results are compared with existing method using sampling gates. The proposed method using FBG for interference reduction provides a cost-effective design of AO-OFDM system

Overview of UMTS network evolution through radio and transmission feature validation

This project is based on several UMTS network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for HSPA data users and transport network evolution towards the All-IP era.Hardware and software validation is a key step in the relationship between the mobile network operator and the vendor. Through this verification process, while executing that functionality or testing a specific hardware, the difference between the actual result and expected result can be better understood and, in turn, this in-depth knowledge acquisition is translated into a tailored usage of the product in the operator’s live network. As a result, validation helps in building a better product as per the customer’s requirement and helps satisfying their needs, which positively impacts in the future evolution of the vendor product roadmap implementation process for a specific customer. This project is based on several Universal Mobile Telecommunication Services (UMTS) network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for High Speed Downlink Packet Access (HSPA) data users and transport network evolution towards the All-IP era.Las campañas de validación hardware y software son un paso clave en las relaciones comerciales establecidas entre un operador de telecomunicaciones y su proveedor de equipos de red. Durante los procesos de certificación, mientras se ejecuta una funcionalidad software o se valida un determinado hardware, se obtiene un conocimiento profundo de la diferencia entre el resultado obtenido y el esperado, repercutiendo directamente en un uso a medida de dicha funcionalidad o hardware en la propia red del cliente. Como consecuencia de lo anterior, podemos aseverar que los procesos de validación permiten en gran medida al proveedor adaptarse mejor a los requerimientos del cliente, ayudando a satisfacer realmente sus necesidades. Esto implica directamente un impacto positivo en la futura evolución del portfolio que el fabricante ofrece a un determinado cliente. Este proyecto está basado en la validación de diferentes funcionalidades de red UMTS, cuyo objetivo es proporcionar un conocimiento global de distintos aspectos que conforman el funcionamiento de una red de telecomunicaciones 3G, como son los procesos de movilidad de acceso radio (acampado de red y handover inter-sistema), las mejoras en la calidad de servicio para usuarios de datos HSPA y la convergencia de la red de transporte hacia la era IP.Els processos de validació hardware i software són un punt clau en les relacions comercials establertes entre un operador de telecomunicaciones i el proveïdor d'equipament de la xarxa. En el transcurs dels processos de certificació, a la mateixa vegada que s'executa una funcionalitat software o es valida un determinat hardware, s'obtenen grans coneixements respecte la diferència entre el resultat obtingut i l'esperat, que són d'aplicació directa a l'hora d'establir un ús adpatat a la xarxa del client. En conseqüència, podem asseverar que les campanyes de validació permeten en gran mesura al proveïdor adaptar-se millor als requeriments del client, ajudant a satisfer realment les seves necessitats. Això implica directament un impacte positiu en la futura evol.lució del portfoli que el fabricant ofereix a un determinat client. Aquest projecte es basa en la presentació d'un procès de validació de diferents funcionalitats relacionades amb la xarxa UMTS, amb l'objectiu de proporcionar un coneixement global de la varietat d'aspectes que conformen el funcionament d'una xarxa de telecomunicacions 3G, com són els processos de mobilitat en accès radio (acampat de l'usuari i handover inter-sistema), millores en la qualitat de servei per a usuaris de dades HSPA i la convergència de la xarxa de transport cap a l'era IP

High-frequency tri-axial resonant gyroscopes

This dissertation reports on the design and implementation of a high-frequency, tri-axial capacitive resonant gyroscopes integrated on a single chip. The components that construct tri-axial rotation sensing consist of a yaw, a pitch and a roll device. The yaw-rate gyroscope has a wide bandwidth and a large full-scale range, and operates at a mode-matched condition with DC polarization voltage of 10V without frequency tuning requirement. The large bandwidth of 3kHz and expected full-scale range over 30,000˚/sec make the device exhibit fast rate response for rapid motion sensing application. For the pitch-and-roll rate sensing, an in-plane drive-mode and two orthogonal out-of-plane sense-modes are employed. The rotation-rate sensing from lateral axes is performed by mode-matching the in-plane drive-mode with out-of-plane sense-modes to detect Coriolis-force induced deflection of the resonant mass. To compensate process variations and thickness deviations in the employed silicon-on-insulator (SOI) substrates, large electrostatic frequency tunings of both the drive and sense modes are realized. A revised high aspect ratio combined polysilicon and silicon (HARPSS) process is developed to resolve the Coriolis response that exists toward out-of-plane direction while drive-mode exists on in-plane, and tune individual frequencies with minimal interference to unintended modes. To conclude and overcome the performance limitation, design optimization of high-frequency tri-axial gyroscopes is suggested. Q-factor enhancement through reduction of thermoelastic damping (TED) and optimizations of physical dimensions are suggested for the yaw disk gyroscope. For the pitch-and-roll gyroscope, scaling property of physical dimension and its subsequent performance enhancement are analyzed.Ph.D

ControlPULP: A RISC-V On-Chip Parallel Power Controller for Many-Core HPC Processors with FPGA-Based Hardware-In-The-Loop Power and Thermal Emulation

High-Performance Computing (HPC) processors are nowadays integrated Cyber-Physical Systems demanding complex and high-bandwidth closed-loop power and thermal control strategies. To efficiently satisfy real-time multi-input multi-output (MIMO) optimal power requirements, high-end processors integrate an on-die power controller system (PCS). While traditional PCSs are based on a simple microcontroller (MCU)-class core, more scalable and flexible PCS architectures are required to support advanced MIMO control algorithms for managing the ever-increasing number of cores, power states, and process, voltage, and temperature variability. This paper presents ControlPULP, an open-source, HW/SW RISC-V parallel PCS platform consisting of a single-core MCU with fast interrupt handling coupled with a scalable multi-core programmable cluster accelerator and a specialized DMA engine for the parallel acceleration of real-time power management policies. ControlPULP relies on FreeRTOS to schedule a reactive power control firmware (PCF) application layer. We demonstrate ControlPULP in a power management use-case targeting a next-generation 72-core HPC processor. We first show that the multi-core cluster accelerates the PCF, achieving 4.9x speedup compared to single-core execution, enabling more advanced power management algorithms within the control hyper-period at a shallow area overhead, about 0.1% the area of a modern HPC CPU die. We then assess the PCS and PCF by designing an FPGA-based, closed-loop emulation framework that leverages the heterogeneous SoCs paradigm, achieving DVFS tracking with a mean deviation within 3% the plant's thermal design power (TDP) against a software-equivalent model-in-the-loop approach. Finally, we show that the proposed PCF compares favorably with an industry-grade control algorithm under computational-intensive workloads.Comment: 33 pages, 11 figure

The 2017 Terahertz Science and Technology Roadmap

Science and technologies based on terahertz frequency electromagnetic radiation (100GHz-30THz) have developed rapidly over the last 30 years. For most of the 20th century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to “real world” applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2016, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 17 sections that cover most of the key areas of THz Science and Technology. We hope that The 2016 Roadmap on THz Science and Technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies

Magnetless circulators based on linear time-varying circuits

In a crowded electromagnetic spectrum with an ever‐increasing demand for higher data rates to enable multimedia‐rich applications and services, an efficient use of the available wireless resources becomes crucial. For this reason, full‐duplex communication, which doubles the transmission rate over a certain bandwidth compared to currently deployed half-duplex radios by operating the uplink and the downlink simultaneously on the same frequency, has been brought back into the spotlight after decades of being presumed impractical. This long‐held assumption has been particularly due to the lack of high performance low-cost and small-size circulators that could mitigate the strong self-interference at the RF frontend interface of full-duplex transceivers while, at the same time, permitting low-loss bi-directional communication using a single antenna. Traditionally, such non-reciprocal components were almost exclusively based on magnetic biasing of rare-earth ferrite materials, which results in bulky and expensive devices that are not suitable for the vast majority of commercial systems. Despite significant research efforts over the past few decades, none of the previous works managed to eliminate the magnet while satisfying all the challenging requirements dictated by the standards of real systems. In this dissertation, we introduce several newly invented magnetless circulators based on linear time-varying circuits that can overcome for the first time the limitations of all previous approaches. We analyze the presented circuits rigorously and validate them through simulations and measurements, showing unprecedented performance in all relevant metrics, thus holding the promise to enable full-duplex radios in the near futur