Efficient hardware prototype of ECDSA modules for blockchain applications

This paper concentrates on the hardware implementation of efficient and re- configurable elliptic curve digital signature algorithm (ECDSA) that is suitable for verifying transactions in Blockchain related applications. Despite ECDSA architecture being computationally expensive, the usage of a dedicated stand-alone circuit enables speedy execution of arithmetic operations. The prototype put forth supports N-bit elliptic curve cryptography (ECC) group operations, signature generation and verification over a prime field for any elliptic curve. The research proposes new hardware framework for modular multiplication and modular multiplicative inverse which is adopted for group operations involved in ECDSA. Every hardware design offered are simulated using modelsim register transfer logic (RTL) simulator. Field programmable gate array (FPGA) implementation of var- ious modules within ECDSA circuit is compared with equivalent existing techniques that is both hardware and software based to highlight the superiority of the suggested work. The results showcased prove that the designs implemented are both area and speed efficient with faster execution and less resource utilization while maintaining the same level of security. The suggested ECDSA structure could replace the software equivalent of digital signatures in hardware blockchain to thwart software attacks and to provide better data protection

High Speed and Low-Complexity Hardware Architectures for Elliptic Curve-Based Crypto-Processors

The elliptic curve cryptography (ECC) has been identified as an efficient scheme for public-key cryptography. This thesis studies efficient implementation of ECC crypto-processors on hardware platforms in a bottom-up approach. We first study efficient and low-complexity architectures for finite field multiplications over Gaussian normal basis (GNB). We propose three new low-complexity digit-level architectures for finite field multiplication. Architectures are modified in order to make them more suitable for hardware implementations specially focusing on reducing the area usage. Then, for the first time, we propose a hybrid digit-level multiplier architecture which performs two multiplications together (double-multiplication) with the same number of clock cycles required as the one for one multiplication. We propose a new hardware architecture for point multiplication on newly introduced binary Edwards and generalized Hessian curves. We investigate higher level parallelization and lower level scheduling for point multiplication on these curves. Also, we propose a highly parallel architecture for point multiplication on Koblitz curves by modifying the addition formulation. Several FPGA implementations exploiting these modifications are presented in this thesis. We employed the proposed hybrid multiplier architecture to reduce the latency of point multiplication in ECC crypto-processors as well as the double-exponentiation. This scheme is the first known method to increase the speed of point multiplication whenever parallelization fails due to the data dependencies amongst lower level arithmetic computations. Our comparison results show that our proposed multiplier architectures outperform the counterparts available in the literature. Furthermore, fast computation of point multiplication on different binary elliptic curves is achieved

Crypto-test-lab for security validation of ECC co-processor test infrastructure

© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksElliptic Curve Cryptography (ECC) is a technology for public-key cryptography that is becoming increasingly popular because it provides greater speed and implementation compactness than other public-key technologies. Calculations, however, may not be executed by software, since it would be so time consuming, thus an ECC co-processor is commonly included to accelerate the speed. Test infrastructure in crypto co-processors is often avoided because it poses serious security holes against adversaries. However, ECC co-processors include complex modules for which only functional test methodologies are unsuitable, because they would take an unacceptably long time during the production test. Therefore, some internal test infrastructure is always included to permit the application of structural test techniques. Designing a secure test infrastructure is quite a complex task that relies on the designer's experience and on trial & error iterations over a series of different types of attacks. Most of the severe attacks cannot be simulated because of the demanding computational effort and the lack of proper attack models. Therefore, prototypes are prepared using FPGAs. In this paper, a Crypto-Test-Lab is presented that includes an ECC co-processor with flexible test infrastructure. Its purpose is to facilitate the design and validation of secure strategies for testing in this type of co-processor.Postprint (author's final draft

Efficient Arithmetic for the Implementation of Elliptic Curve Cryptography

The technology of elliptic curve cryptography is now an important branch in public-key based crypto-system. Cryptographic mechanisms based on elliptic curves depend on the arithmetic of points on the curve. The most important arithmetic is multiplying a point on the curve by an integer. This operation is known as elliptic curve scalar (or point) multiplication operation. A cryptographic device is supposed to perform this operation efficiently and securely. The elliptic curve scalar multiplication operation is performed by combining the elliptic curve point routines that are defined in terms of the underlying finite field arithmetic operations. This thesis focuses on hardware architecture designs of elliptic curve operations. In the first part, we aim at finding new architectures to implement the finite field arithmetic multiplication operation more efficiently. In this regard, we propose novel schemes for the serial-out bit-level (SOBL) arithmetic multiplication operation in the polynomial basis over F_2^m. We show that the smallest SOBL scheme presented here can provide about 26-30\% reduction in area-complexity cost and about 22-24\% reduction in power consumptions for F_2^{163} compared to the current state-of-the-art bit-level multiplier schemes. Then, we employ the proposed SOBL schemes to present new hybrid-double multiplication architectures that perform two multiplications with latency comparable to the latency of a single multiplication. Then, in the second part of this thesis, we investigate the different algorithms for the implementation of elliptic curve scalar multiplication operation. We focus our interest in three aspects, namely, the finite field arithmetic cost, the critical path delay, and the protection strength from side-channel attacks (SCAs) based on simple power analysis. In this regard, we propose a novel scheme for the scalar multiplication operation that is based on processing three bits of the scalar in the exact same sequence of five point arithmetic operations. We analyse the security of our scheme and show that its security holds against both SCAs and safe-error fault attacks. In addition, we show how the properties of the proposed elliptic curve scalar multiplication scheme yields an efficient hardware design for the implementation of a single scalar multiplication on a prime extended twisted Edwards curve incorporating 8 parallel multiplication operations. Our comparison results show that the proposed hardware architecture for the twisted Edwards curve model implemented using the proposed scalar multiplication scheme is the fastest secure SCA protected scalar multiplication scheme over prime field reported in the literature

Automatic generation of high speed elliptic curve cryptography code

Apparently, trust is a rare commodity when power, money or life itself are at stake. History is full of examples. Julius Caesar did not trust his generals, so that: ``If he had anything confidential to say, he wrote it in cipher, that is, by so changing the order of the letters of the alphabet, that not a word could be made out. If anyone wishes to decipher these, and get at their meaning, he must substitute the fourth letter of the alphabet, namely D, for A, and so with the others.'' And so the history of cryptography began moving its first steps. Nowadays, encryption has decayed from being an emperor's prerogative and became a daily life operation. Cryptography is pervasive, ubiquitous and, the best of all, completely transparent to the unaware user. Each time we buy something on the Internet we use it. Each time we search something on Google we use it. Everything without (almost) realizing that it silently protects our privacy and our secrets. Encryption is a very interesting instrument in the "toolbox of security" because it has very few side effects, at least on the user side. A particularly important one is the intrinsic slow down that its use imposes in the communications. High speed cryptography is very important for the Internet, where busy servers proliferate. Being faster is a double advantage: more throughput and less server overhead. In this context, however, the public key algorithms starts with a big handicap. They have very bad performances if compared to their symmetric counterparts. Due to this reason their use is often reduced to the essential operations, most notably key exchanges and digital signatures. The high speed public key cryptography challenge is a very practical topic with serious repercussions in our technocentric world. Using weak algorithms with a reduced key length to increase the performances of a system can lead to catastrophic results. In 1985, Miller and Koblitz independently proposed to use the group of rational points of an elliptic curve over a finite field to create an asymmetric algorithm. Elliptic Curve Cryptography (ECC) is based on a problem known as the ECDLP (Elliptic Curve Discrete Logarithm Problem) and offers several advantages with respect to other more traditional encryption systems such as RSA and DSA. The main benefit is that it requires smaller keys to provide the same security level since breaking the ECDLP is much harder. In addition, a good ECC implementation can be very efficient both in time and memory consumption, thus being a good candidate for performing high speed public key cryptography. Moreover, some elliptic curve based techniques are known to be extremely resilient to quantum computing attacks, such as the SIDH (Supersingular Isogeny Diffie-Hellman). Traditional elliptic curve cryptography implementations are optimized by hand taking into account the mathematical properties of the underlying algebraic structures, the target machine architecture and the compiler facilities. This process is time consuming, requires a high degree of expertise and, ultimately, error prone. This dissertation' ultimate goal is to automatize the whole optimization process of cryptographic code, with a special focus on ECC. The framework presented in this thesis is able to produce high speed cryptographic code by automatically choosing the best algorithms and applying a number of code-improving techniques inspired by the compiler theory. Its central component is a flexible and powerful compiler able to translate an algorithm written in a high level language and produce a highly optimized C code for a particular algebraic structure and hardware platform. The system is generic enough to accommodate a wide array of number theory related algorithms, however this document focuses only on optimizing primitives based on elliptic curves defined over binary fields

HLS-Based Methodology for Fast Iterative Development Applied to Elliptic Curve Arithmetic

International audienceHigh-Level Synthesis (HLS) is used by hardware developers to achieve higher abstraction in circuit descriptions. In order to shorten the hardware development time via HLS, we present an adjustment of the Iterative and Incremental Design (IID) methodology, frequently used in software development. In particular, our methodology is relevant for the development of applications with unusual complexity: the method was applied here to the development of large modular arithmetic, commonly used for cryptography applications (e.g., Elliptic Curves). Rapid feedback on circuit characteristics is used to evaluate deep architectural changes in short time, greatly reducing the time-to-market with respect to hand-made designs. In addition, our approach is highly flexible, since the same generic high-level description can be used to produce an entire set of circuits, each with different area/performance trade-offs. Thanks to the proposed approach, any change to the initial specification (e.g., the curve used) is also very fast, while it may require a large effort in the case of hand-made designs

The Q-curve construction for endomorphism-accelerated elliptic curves

We give a detailed account of the use of $\mathbb{Q}$-curve reductions to construct elliptic curves over $\mathbb{F}\_{p^2}$ with efficiently computable endomorphisms, which can be used to accelerate elliptic curve-based cryptosystems in the same way as Gallant--Lambert--Vanstone (GLV) and Galbraith--Lin--Scott (GLS) endomorphisms. Like GLS (which is a degenerate case of our construction), we offer the advantage over GLV of selecting from a much wider range of curves, and thus finding secure group orders when $p$ is fixed for efficient implementation. Unlike GLS, we also offer the possibility of constructing twist-secure curves. We construct several one-parameter families of elliptic curves over $\mathbb{F}\_{p^2}$ equipped with efficient endomorphisms for every p \textgreater{} 3, and exhibit examples of twist-secure curves over $\mathbb{F}\_{p^2}$ for the efficient Mersenne prime $p = 2^{127}-1$.Comment: To appear in the Journal of Cryptology. arXiv admin note: text overlap with arXiv:1305.540

Efficient and Secure ECDSA Algorithm and its Applications: A Survey

Public-key cryptography algorithms, especially elliptic curve cryptography (ECC)and elliptic curve digital signature algorithm (ECDSA) have been attracting attention frommany researchers in different institutions because these algorithms provide security andhigh performance when being used in many areas such as electronic-healthcare, electronicbanking,electronic-commerce, electronic-vehicular, and electronic-governance. These algorithmsheighten security against various attacks and the same time improve performanceto obtain efficiencies (time, memory, reduced computation complexity, and energy saving)in an environment of constrained source and large systems. This paper presents detailedand a comprehensive survey of an update of the ECDSA algorithm in terms of performance,security, and applications