Acousto-optic signal processors for transmission and reception of phased-array antenna signals

Novel acousto-optic processors for control and signal processing in phased-array antennas are presented. These processors can operate in both the antenna transmit and receive modes. An experimental acousto-optic processor is demonstrated in the laboratory. This optical technique replaces all the phase-shifting devices required in electronically controlled phased-array antennas

The Case for Combining a Large Low-Band Very High Frequency Transmitter With Multiple Receiving Arrays for Geospace Research: A Geospace Radar

We argue that combining a high‐power, large‐aperture radar transmitter with several large‐aperture receiving arrays to make a geospace radar—a radar capable of probing near‐Earth space from the upper troposphere through to the solar corona—would transform geospace research. We review the emergence of incoherent scatter radar in the 1960s as an agent that unified early, pioneering research in geospace in a common theoretical, experimental, and instrumental framework, and we suggest that a geospace radar would have a similar effect on future developments in space weather research. We then discuss recent developments in radio‐array technology that could be exploited in the development of a geospace radar with new or substantially improved capabilities compared to the radars in use presently. A number of applications for a geospace radar with the new and improved capabilities are reviewed including studies of meteor echoes, mesospheric and stratospheric turbulence, ionospheric flows, plasmaspheric and ionospheric irregularities, and reflection from the solar corona and coronal mass ejections. We conclude with a summary of technical requirements

Phased Array Systems in Silicon

Phased array systems, a special case of MIMO systems, take advantage of spatial directivity and array gain to increase spectral efficiency. Implementing a phased array system at high frequency in a commercial silicon process technology presents several challenges. This article focuses on the architectural and circuit-level trade-offs involved in the design of the first silicon-based fully integrated phased array system operating at 24 GHz. The details of some of the important circuit building blocks are also discussed. The measured results demonstrate the feasibility of using integrated phased arrays for wireless communication and vehicular radar applications at 24 GHz

Efficient Transmit Beamspace Design for Search-free Based DOA Estimation in MIMO Radar

In this paper, we address the problem of transmit beamspace design for multiple-input multiple-output (MIMO) radar with colocated antennas in application to direction-of-arrival (DOA) estimation. A new method for designing the transmit beamspace matrix that enables the use of search-free DOA estimation techniques at the receiver is introduced. The essence of the proposed method is to design the transmit beamspace matrix based on minimizing the difference between a desired transmit beampattern and the actual one under the constraint of uniform power distribution across the transmit array elements. The desired transmit beampattern can be of arbitrary shape and is allowed to consist of one or more spatial sectors. The number of transmit waveforms is even but otherwise arbitrary. To allow for simple search-free DOA estimation algorithms at the receive array, the rotational invariance property is established at the transmit array by imposing a specific structure on the beamspace matrix. Semi-definite relaxation is used to transform the proposed formulation into a convex problem that can be solved efficiently. We also propose a spatial-division based design (SDD) by dividing the spatial domain into several subsectors and assigning a subset of the transmit beams to each subsector. The transmit beams associated with each subsector are designed separately. Simulation results demonstrate the improvement in the DOA estimation performance offered by using the proposed joint and SDD transmit beamspace design methods as compared to the traditional MIMO radar technique.Comment: 32 pages, 10 figures, submitted to the IEEE Trans. Signal Processing in May 201

Phased-array laser radar: Concept and application

The design and construction of a coaxial transmitter-receiver combination was investigated. Major emphasis was placed on simple permanent optical alignment, transmitter-receiver field of view matching, use of a pulsed gas laser as a transmitter maximum optical efficiency, complete digital control of data acquisition, and optical mount pointing and tracking. Also a means of expanding the coaxial transmitter-receiver concept to allow phased-array lidar, par-lidar was described

Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays

Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed prohibitively complicated and costly - is well underway. In a few years, Massive MIMO with fully digital transceivers will be a mainstream feature at both sub-6 GHz and mmWave frequencies. In this paper, we explain how the first chapter of the Massive MIMO research saga has come to an end, while the story has just begun. The coming wide-scale deployment of BSs with massive antenna arrays opens the door to a brand new world where spatial processing capabilities are omnipresent. In addition to mobile broadband services, the antennas can be used for other communication applications, such as low-power machine-type or ultra-reliable communications, as well as non-communication applications such as radar, sensing and positioning. We outline five new Massive MIMO related research directions: Extremely large aperture arrays, Holographic Massive MIMO, Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin

Fast Implementation of Transmit Beamforming for Colocated MIMO Radar

Multiple-input Multiple-output (MIMO) radars benefit from spatial and waveform diversities to improve the performance potential. Phased array radars transmit scaled versions of a single waveform thereby limiting the transmit degrees of freedom to one. However MIMO radars transmit diverse waveforms from different transmit array elements thereby increasing the degrees of freedom to form flexible transmit beampatterns. The transmit beampattern of a colocated MIMO radar depends on the zero-lag correlation matrix of different transmit waveforms. Many solutions have been developed for designing the signal correlation matrix to achieve a desired transmit beampattern based on optimization algorithms in the literature. In this paper, a fast algorithm for designing the correlation matrix of the transmit waveforms is developed that allows the next generation radars to form flexible beampatterns in real-time. An efficient method for sidelobe control with negligible increase in mainlobe width is also presented

Rationale for and design of a generic tiled hierarchical phased array beamforming architecture

The purpose of the phased array beamforming project is to develop a generic flexible efficient phased array receiver platform, using a mixed signal hardware/software-codesign approach. The results will be applicable to any radio (RF) system, but we will focus on satellite receiver (DVB-S) and radar applications. We will present a preliminary mapping of beamforming processing on a tiled architecture and determine its scalability.\ud \ud The functionality, size and cost constraints imply an integrated mixed signal CMOS solution. For a generic flexible multi-standard solution, a software defined radio approach is taken. Because a scalable and dependable solution is needed, a tiled hierarchical architecture is proposed with reconfigurable hardware to regain flexibility. A mapping is provided of beamforming on the proposed architecture. The advantages and disadvantages of each solution are discussed with respect to applicability and scalability.\ud \ud Different beamforming processing solutions can be mapped on the same proposed tiled hierarchical architecture. This provides a flexible, scalable and reconfigurable solution for a wide application domain. Beamforming is a data-driven streaming process which lends itself well for a regular scalable architecture. Beamsteering on the other hand is much more control-oriented and future work will focus on how to support beamsteering on the proposed architecture as well