23,378 research outputs found
Planning and Resource Management in an Intelligent Automated Power Management System
Power system management is a process of guiding a power system towards the objective of continuous supply of electrical power to a set of loads. Spacecraft power system management requires planning and scheduling, since electrical power is a scarce resource in space. The automation of power system management for future spacecraft has been recognized as an important R&D goal. Several automation technologies have emerged including the use of expert systems for automating human problem solving capabilities such as rule based expert system for fault diagnosis and load scheduling. It is questionable whether current generation expert system technology is applicable for power system management in space. The objective of the ADEPTS (ADvanced Electrical Power management Techniques for Space systems) is to study new techniques for power management automation. These techniques involve integrating current expert system technology with that of parallel and distributed computing, as well as a distributed, object-oriented approach to software design. The focus of the current study is the integration of new procedures for automatically planning and scheduling loads with procedures for performing fault diagnosis and control. The objective is the concurrent execution of both sets of tasks on separate transputer processors, thus adding parallelism to the overall management process
Recommended from our members
Fault tolerance in super-scalar and VLIW processors
In this paper, we present a method for utilizing the spare capacity in super-scalar and very long instruction word (VLIW) processors to tolerate functional unit failures. Unlike previous work that was primarily interested in detection of transient faults, we are concerned with more permanent and/or intermittent faults which necessitate processor reconfiguration. Our method utilizes the VLIW compiler or the superscalar scheduler to insert redundant operations whenever idle functional units exist. The results of these redundant operations are used to detect and diagnose functional unit failures. For super-scalar processors, the scheduler can then utilize this information to ensure that operations are performed only on non-faulty units. In VLIW processors, this is equivalent to recompiling the code to run on the remaining non-faulty functional units. Since in certain applications, recompilation may not be possible, we consider two alternative reconfiguration strategies for VLIW processors. These strategies sacrifice storage space and execution time, respectively, in order to reconfigure without recompiling. We present Markov models that describe the behavior of processors using these different approaches and we evaluate their reliabilities. The results show that, while super-scalar and VLIW with recompilation provide the highest reliability, all proposed strategies significantly increase reliability over that of an unprotected processor
Architecture and Design of Medical Processor Units for Medical Networks
This paper introduces analogical and deductive methodologies for the design
medical processor units (MPUs). From the study of evolution of numerous earlier
processors, we derive the basis for the architecture of MPUs. These specialized
processors perform unique medical functions encoded as medical operational
codes (mopcs). From a pragmatic perspective, MPUs function very close to CPUs.
Both processors have unique operation codes that command the hardware to
perform a distinct chain of subprocesses upon operands and generate a specific
result unique to the opcode and the operand(s). In medical environments, MPU
decodes the mopcs and executes a series of medical sub-processes and sends out
secondary commands to the medical machine. Whereas operands in a typical
computer system are numerical and logical entities, the operands in medical
machine are objects such as such as patients, blood samples, tissues, operating
rooms, medical staff, medical bills, patient payments, etc. We follow the
functional overlap between the two processes and evolve the design of medical
computer systems and networks.Comment: 17 page
Distributed computing methodology for training neural networks in an image-guided diagnostic application
Distributed computing is a process through which a set of computers connected by a network is used collectively to solve a single problem. In this paper, we propose a distributed computing methodology for training neural networks for the detection of lesions in colonoscopy. Our approach is based on partitioning the training set across multiple processors using a parallel virtual machine. In this way, interconnected computers of varied architectures can be used for the distributed evaluation of the error function and gradient values, and, thus, training neural networks utilizing various learning methods. The proposed methodology has large granularity and low synchronization, and has been implemented and tested. Our results indicate that the parallel virtual machine implementation of the training algorithms developed leads to considerable speedup, especially when large network architectures and training sets are used
Deep Space Network information system architecture study
The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control
Survivable algorithms and redundancy management in NASA's distributed computing systems
The design of survivable algorithms requires a solid foundation for executing them. While hardware techniques for fault-tolerant computing are relatively well understood, fault-tolerant operating systems, as well as fault-tolerant applications (survivable algorithms), are, by contrast, little understood, and much more work in this field is required. We outline some of our work that contributes to the foundation of ultrareliable operating systems and fault-tolerant algorithm design. We introduce our consensus-based framework for fault-tolerant system design. This is followed by a description of a hierarchical partitioning method for efficient consensus. A scheduler for redundancy management is introduced, and application-specific fault tolerance is described. We give an overview of our hybrid algorithm technique, which is an alternative to the formal approach given
Knowledge representation into Ada parallel processing
The Knowledge Representation into Ada Parallel Processing project is a joint NASA and Air Force funded project to demonstrate the execution of intelligent systems in Ada on the Charles Stark Draper Laboratory fault-tolerant parallel processor (FTPP). Two applications were demonstrated - a portion of the adaptive tactical navigator and a real time controller. Both systems are implemented as Activation Framework Objects on the Activation Framework intelligent scheduling mechanism developed by Worcester Polytechnic Institute. The implementations, results of performance analyses showing speedup due to parallelism and initial efficiency improvements are detailed and further areas for performance improvements are suggested
An integrated approach to system design, reliability, and diagnosis
The requirement for ultradependability of computer systems in future avionics and space applications necessitates a top-down, integrated systems engineering approach for design, implementation, testing, and operation. The functional analyses of hardware and software systems must be combined by models that are flexible enough to represent their interactions and behavior. The information contained in these models must be accessible throughout all phases of the system life cycle in order to maintain consistency and accuracy in design and operational decisions. One approach being taken by researchers at Ames Research Center is the creation of an object-oriented environment that integrates information about system components required in the reliability evaluation with behavioral information useful for diagnostic algorithms. Procedures have been developed at Ames that perform reliability evaluations during design and failure diagnoses during system operation. These procedures utilize information from a central source, structured as object-oriented fault trees. Fault trees were selected because they are a flexible model widely used in aerospace applications and because they give a concise, structured representation of system behavior. The utility of this integrated environment for aerospace applications in light of our experiences during its development and use is described. The techniques for reliability evaluation and failure diagnosis are discussed, and current extensions of the environment and areas requiring further development are summarized
Dependable reconfigurable multi-sensor poles for security
Wireless sensor network poles for security monitoring under harsh environments require a very high dependability as they are safety-critical [1]. An example of a multi-sensor pole is shown. Crucial attribute in these systems for security, especially in harsh environment, is a high robustness and guaranteed availability during lifetime. This environment could include molest. In this paper, two approaches are used which are applied simultaneously but are developed in different projects. \u
- …