Secure store and forward proxy for dynamic IoT applications over M2M networks

Internet of Things (IoT) applications are expected to generate a huge unforeseen amount of traffic flowing from Consumer Electronics devices to the network. In order to overcome existing interoperability problems, several standardization bodies have joined to bring a new generation of Machine to Machine (M2M) networks as a result of the evolution of wireless sensor/actor networks and mobile cellular networks to converged networks. M2M is expected to enable IoT paradigms and related concepts into a reality at a reasonable cost. As part of the convergence, several technologies preventing new IoT services to interfere with existing Internet services are flourishing. Responsive, message-driven, resilient and elastic architectures are becoming essential parts of the system. These architectures will control the entire data flow for an IoT system requiring sometimes to store, shape and forward data among nodes of a M2M network to improve network performance. However, IoT generated data have an important personal component since it is generated in personal devices or are the result of the observation of the physical world, so rises significant security concerns. This article proposes a novel opportunistic flexible secure store and forward proxy for M2M networks and its mapping to asynchronous protocols that guarantees data confidentiality

Platforms and Protocols for the Internet of Things

Building a general architecture for the Internet of Things (IoT) is a very complex task, exacerbated by the extremely large variety of devices, link layer technologies, and services that may be involved in such a system. In this paper, we identify the main blocks of a generic IoT architecture, describing their features and requirements, and analyze the most common approaches proposed in the literature for each block. In particular, we compare three of the most important communication technologies for IoT purposes, i.e., REST, MQTT, and AMQP, and we also analyze three IoT platforms: openHAB, Sentilo, and Parse. The analysis will prove the importance of adopting an integrated approach that jointly addresses several issues and is able to flexibly accommodate the requirements of the various elements of the system. We also discuss a use case which illustrates the design challenges and the choices to make when selecting which protocols and technologies to use

An ideal IoT solution for real-time web monitoring

For the internet of things (IoT) to fully emerge, it is necessary to design a suitable system architecture and specific protocols for this environment. The former to provide horizontal solutions, breaking away the current paradigm of silos solutions, and thus, allowing the creation of open and interoperable systems; while the latter will offer efficient and scalable communications. This paper presents the latest standards and ongoing efforts to develop specific protocols for IoT. Furthermore, this paper presents a new system, with the most recent standards for IoT. Its design, implementation and evaluation will be also described. The proposed system is based on the latest ETSI M2M specification (ETSI TC M2M in ETSI TS 103 093 V2.1.1.http://www.etsi.org/deliver/etsi_ts/103000_103099/103093/02.01.01_60/ts_103093v020101p.pdf, 2013b) and the MQTT protocol (IBM, Eurotech in MQTT V3.1 Protocol Specification pp 1-42, http://public.dhe.ibm.com/software/dw/webservices/ws-mqtt/MQTT_V3.1_Protocol_Specific. pdf, 2010). With this solution it is possible to show how we can create new applications to run over it and the importance of designing specifically tailored for IoT communication protocols in order to support real-time applications.- This project was funded by Fundo Europeu de Desenvolvimento Regional (FEDER), by Programa Operacional Factores de Competitividade (POFC) - COMPETE and by Fundacao para a Ciencia eTecnologia, on the Scope of projects: PEstC/EEI/UI0319/2015 and PEstC/EEI/UI0027/2015. This paper is a result of the project "SmartEGOV: Harnessing EGOV for Smart Governance (Foundations, methods, Tools) / NORTE-01-0145-FEDER-000037", supported by Norte Portugal Regional Operational Programme(NORTE2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (EFDR).info:eu-repo/semantics/publishedVersio

Integration of heterogeneous devices and communication models via the cloud in the constrained internet of things

As the Internet of Things continues to expand in the coming years, the need for services that span multiple IoT application domains will continue to increase in order to realize the efficiency gains promised by the IoT. Today, however, service developers looking to add value on top of existing IoT systems are faced with very heterogeneous devices and systems. These systems implement a wide variety of network connectivity options, protocols (proprietary or standards-based), and communication methods all of which are unknown to a service developer that is new to the IoT. Even within one IoT standard, a device typically has multiple options for communicating with others. In order to alleviate service developers from these concerns, this paper presents a cloud-based platform for integrating heterogeneous constrained IoT devices and communication models into services. Our evaluation shows that the impact of our approach on the operation of constrained devices is minimal while providing a tangible benefit in service integration of low-resource IoT devices. A proof of concept demonstrates the latter by means of a control and management dashboard for constrained devices that was implemented on top of the presented platform. The results of our work enable service developers to more easily implement and deploy services that span a wide variety of IoT application domains

A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

Plataforma de gestão M2M

Mestrado em Engenharia de Computadores e TelemáticaThe Internet of Things is still a fast growing area and topic of interest. New solutions and implementations keep emerging, both in service oriented solutions or device oriented solutions with M2M communications, therefore promoting the creation of new business models. Thus, as a natural evolution, came the possibility to abstract sensor management from service creation. Allowing a delegation of sensor management from the sensor providers, to focus on content creation through services. However, this delegation brings new concerns regarding access control. Consequently, this dissertation proposes a possible solution to this problem, enclosed in a service oriented platform interconnected with an ETSI M2M solution. Promoting interoperability between sensors and allowing a great elasticity in service creation.A Internet das Coisas continua a ser uma área em grande crescimento e de grande interesse. Estão constantemente a surgir novas soluções e inplementações, tanto ao nível dos serviços como ao nível das comunicações Máquina-a-Máquina, promovendo assim o aparecimento de novos modelos de negócio. Desta forma surgiu naturalmente a possibilidade de abstrair a gestão de sensores da criação de serviços. Permitindo assim, uma delagação da gestão por parte de empresas detentoras de sensores, para se focarem no conteúdo com a criação de serviços. Contudo esta divisão acarreta algumas preocupações de segurança quanto ao controlo de acesso. Nesse sentido, esta dissertação propõe uma possível solução para o mesmo, englobada numa plataforma orientada ao serviços interligada com uma solução ETSI M2M. Promovendo a interoperabilidade entre sensores e permitindo assim uma grande elasticidade na criação de serviços

Study of the development of an Io T-based sensor platform for e-agriculture

E-agriculture, sometimes reffered as 'ICT in agriculture' (Information and Communication technologies) or simply "smart agriculture", is a relatively recent and emerging field focused on the enhacement on agricultural and rural development through improved information and communication processes. This concept, involves the design, development, evaluation and application of innovative ways to use IoT technologies in the rural domain, with a primary focus on agriculture, in order to achieve better ways of growing food for the masses with sustainability. In IoT-based agriculture, platforms are built for monitoring the crop field with the help of sensors (light, humidity, temperature, soil moisture, etc.) and automating the irrigation system. The farmers can monitor the field conditions from anywhere and highly more efficient compared to conventional approaches

The design and implementation of a smart-parking system for Helsinki Area

The strain on the parking infrastructure for the general public has significantly grown as a result of the ever rising number of vehicles geared by the rapid population growth in urban areas. Consequently, finding a vacant parking space has become quite a challenging task, especially at peak hours. Drivers have to cycle back and forth a number of times before they finally find where to park. This leads to increased fuel consumption, air pollution, and increased likelihood of causing accidents, to mention but a few. Paying for the parking is not straight forward either, as the ticket machines, on top of being located at a distance, in many times, they have several payment methods drivers must prepare for. A system therefore, that would allow drivers to check for the vacant parking places before driving to a busy city, takes care of the parking fee for exact time they have used, manages electronic parking permit, is the right direction towards toppling these difficulties. The main objective of this project was to design and implement a system that would provide parking occupancy estimation, parking fee payment method, parking permit management and parking analytics for the city authorities. The project had three phases. The first and the second phases used qualitative approaches to validate our hypotheses about parking shortcoming in Helsinki area and the recruitment of participants to the pilot of the project, respectively. The third phase involved the design, implementation and installation of the system. The other objective was to study the challenges a smart parking system would face at different stages of its life cycle. The objectives of the project were achieved and the considered assumption about the challenges associated with parking in a busy city were validated. A smart parking system will allow drivers to check for available parking spaces beforehand, they are able to pay for the parking fee, they can get electronic parking permits, and the city authority can get parking analytics for the city plannin

Interoperability in IoT

Interoperability refers to the ability of IoT systems and components to communicate and share information among them. This crucial feature is key to unlock all of the IoT paradigm´s potential, including immense technological, economic, and social benefits. Interoperability is currently a major challenge in IoT, mainly due to the lack of a reference standard and the vast heterogeneity of IoT systems. IoT interoperability has also a significant importance in big data analytics because it substantively eases data processing. This chapter analyzes the critical importance of IoT interoperability, its different types, challenges to face, diverse use cases, and prospective interoperability solutions. Given that it is a complex concept that involves multiple aspects and elements of IoT, for a deeper insight, interoperability is studied across different levels of IoT systems. Furthermore, interoperability is also re-examined from a global approach among platforms and systems.González-Usach, R.; Yacchirema-Vargas, DC.; Julián-Seguí, M.; Palau Salvador, CE. (2019). Interoperability in IoT. Handbook of Research on Big Data and the IoT. 149-173. http://hdl.handle.net/10251/150250S14917