Modeling and Analysis of Cellular Networks Using Stochastic Geometry: A Tutorial

This paper presents a tutorial on stochastic geometry (SG)-based analysis for cellular networks. This tutorial is distinguished by its depth with respect to wireless communication details and its focus on cellular networks. This paper starts by modeling and analyzing the baseband interference in a baseline single-tier downlink cellular network with single antenna base stations and universal frequency reuse. Then, it characterizes signal-to-interference-plus-noise-ratio and its related performance metrics. In particular, a unified approach to conduct error probability, outage probability, and transmission rate analysis is presented. Although the main focus of this paper is on cellular networks, the presented unified approach applies for other types of wireless networks that impose interference protection around receivers. This paper then extends the unified approach to capture cellular network characteristics (e.g., frequency reuse, multiple antenna, power control, etc.). It also presents numerical examples associated with demonstrations and discussions. To this end, this paper highlights the state-of-the-art research and points out future research directions

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Performance Evaluation of Ultra-Dense Networks with Applications in Internet-of-Things

The new wireless era in the next decade and beyond would be very different from our experience nowadays. The fast pace of introducing new technologies, services, and applications requires the researchers and practitioners in the field be ready by making paradigm shifts. The stringent requirements on 5G networks, in terms of throughput, latency, and connectivity, challenge traditional incremental improvement in the network performance. This urges the development of unconventional solutions such as network densification, massive multiple-input multiple-output (massive MIMO), cloud-based radio access network (C-RAN), millimeter Waves (mmWaves), non-orthogonal multiple access (NOMA), full-duplex communication, wireless network virtualization, and proactive content-caching to name a few. Ultra-Dense Network (UDN) is one of the preeminent technologies in the racetrack towards fulfilling the requirements of next generation mobile networks. Dense networks are featured by the deployment of abundant of small cells in hotspots where immense traffic is generated. In this context, the density of small cells surpasses the active users’ density providing a new wireless environment that has never been experienced in mobile communication networks. The high density of small cells brings the serving cells much closer to the end users providing a two-fold gain where better link quality is achieved and more spatial reuse is accomplished. In this thesis, we identified the distinguishing features of dense networks which include: close proximity of many cells to a given user, potential inactivity of most base stations (BSs) due to lack of users, drastic inter-cell interference in hot-spots, capacity limitation by virtue of the backhaul bottleneck, and fundamentally different propagation environments. With these features in mind, we recognized several problems associated with the performance evaluation of UDN which require a treatment different from traditional cellular networks. Using rigorous advanced mathematical techniques along with extensive Monte Carlo simulations, we modelled and analytically studied the problems in question. Consequently, we developed several mathematical frameworks providing closed-form and easy-computable mathematical instruments which network designers and operators can use to tune the networks in order to achieve the optimal performance. Moreover, the investigations performed in this thesis furnish a solid ground for addressing more problems to better understand and exploit the UDN technology for higher performance grades. In Chapter 3, we propose the multiple association in dense network environment where the BSs are equipped with idle mode capabilities. This provides the user with a “data-shower,” where the user’s traffic is split into multiple paths, which helps overcoming the capacity limitations imposed by the backhaul links. We evaluate the performance of the proposed association scheme considering general fading channel distributions. To this end, we develop a tractable framework for the computation of the average downlink rate. In Chapter 4, we study the downlink performance of UDNs considering Stretched Exponential Path-Loss (SEPL) to capture the short distances of the communication links. Considering the idle mode probability of small cells, we draw conclusions which better reflect the performance of network densification considering SEPL model. Our findings reveal that the idle mode capabilities of the BSs provide a very useful interference mitigation technique. Another interesting insight is that the system interference in idle mode capable UDNs is upper-bounded by the interference generated from the active BSs, and in turn, this is upper-bounded by the number of active users where more active users is translated to more interference in the system. This means that the interference becomes independent of the density of the small cells as this density increases. In Chapter 5, we provide the derivation of the average secrecy rate in UDNs considering their distinct traits, namely, idle mode BSs and LOS transmission. To this end, we exploit the standard moment generating function (MGF)-based approach to derive relatively simple and easily computable expressions for the average secrecy rate considering the idle mode probability and Rician fading channel. The result of this investigation avoids the system level simulations where the performance evaluation complexity can be greatly reduced with the aid of the derived analytical expressions. In Chapter 6, we model the uplink coverage of mMTC deployment scenario considering a UDN environment. The presented analysis reveals the significant and unexpected impact of the high density of small cells in UDNs on the maximum transmit power of the MTC nodes. This finding relaxes the requirements on the maximum transmit power which in turn allows for less complexity, brings more cost savings, and yields much longer battery life. This investigation provides accurate, simple, and insightful expressions which shows the impact of every single system parameter on the network performance allowing for guided tunability of the network. Moreover, the results signify the asymptotic limits of the impact of all system parameters on the network performance. This allows for the efficient operation of the network by designing the system parameters which maximizes the network performance. In Chapter 7, we address the impact of the coexistence of MTC and HTC communications on the network performance in UDNs. In this investigation, we study the downlink network performance in terms of the coverage probability and the cell load where we propose two association schemes for the MTC devices, namely, Connect-to-Closest (C2C) and Connect-to-Active (C2A). The network performance is then analyzed and compared in both association schemes. In Chapter 8, we model the uplink coverage of HTC users and MTC devices paired together in NOMA-based radio access. Closed-form and easy-computable analytical results are derived for the considered performance metrics, namely the uplink coverage and the uplink network throughput. The analytical results, which are validated by extensive Monte Carlo simulations, reveal that increasing the density of small cells and the available bandwidth significantly improves the network performance. On the other side, the power control parameters has to be tuned carefully to approach the optimal performance of both the uplink coverage and the uplink network throughput

Distributed MIMO for wireless sensor networks

Over the past decade, wireless sensor networks have gained more research attention for their potential applications in healthcare, defense, environmental monitoring, etc. Due to the strict energy limitation in the sensor node, techniques used for energy saving are necessary for this kind of network. MIMO technology is proven to be an effective method of increasing the channel capacity and supporting higher data rate under a fixed power budget and bit-error-rate requirement. So, wireless sensor networks and MIMO technology are combined and investigated in this thesis. The key contributions of this thesis are detailed below. Firstly, the extended total energy consumption equations for different transmission modes in cluster-based wireless sensor networks are derived. The transmitting energy consumption and the circuit energy consumption are taken into account in both intra-cluster and inter-cluster phases respectively. Secondly, a resource allocation framework is proposed for cluster-based cooperative MIMO on consideration of circuit energy. By introducing two adjusting parameters for the transmitting energy and the time slot allocation between intra-cluster and inter-cluster phases, this framework is designed to achieve the maximum data throughput of the whole system whilst maintaining the capacity and outage probability requirement in these two phases respectively. Thirdly, on comparison of various transmission modes in wireless sensor networks, a relatively energy-efficient mode switching framework is proposed for both single-hop and multi-hop transmissions. Based on the destination and the neighboring nodes’ path-loss, the source node can decide which transmission mode, SISO or cooperative MISO, single-hop or multi-hop, should be chosen. Conditions for each mode switching are investigated. The possible existing area of the cooperative nodes and the relaying nodes can be obtained from this framework

D11.2 Consolidated results on the performance limits of wireless communications

Deliverable D11.2 del projecte europeu NEWCOM#The report presents the Intermediate Results of N# JRAs on Performance Limits of Wireless Communications and highlights the fundamental issues that have been investigated by the WP1.1. The report illustrates the Joint Research Activities (JRAs) already identified during the first year of the project which are currently ongoing. For each activity there is a description, an illustration of the adherence and relevance with the identified fundamental open issues, a short presentation of the preliminary results, and a roadmap for the joint research work in the next year. Appendices for each JRA give technical details on the scientific activity in each JRA.Peer ReviewedPreprin

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675