Double-loop sliding mode control of reentry hypersonic vehicle with RCS

In order to solve the problem of insufficient aerodynamic moment caused by thin air in the re-entry stage of hypersonic vehicle, this paper establishes an attitude angle model of hypersonic vehicle with reaction control system (RCS), and derives its affine linear model to decoupled the internal and external loop. According to the dead zone and saturation characteristics of RCS thruster, a control method to convert continuous moment into discrete switching instruction using pulse width modulation (PWM) is proposed. Since the number of thrusters is usually redundant, the installation matrix of thrusters in the body coordinate is established, and the command moment is coordinately distributed to the individual thrusters. Then a double-loop sliding mode controller (DSMC) is designed to achieve attitude stability and trajectory tracking. Finally, the simulation results show that DSMC has higher maneuverability, fewer thruster switches and stronger robustness to interference

Finite-time control for uncertain systems and application to flight control

In this paper, the finite-time control design problem for a class of nonlinear systems with matched and mismatched uncertainty is addressed. The finite-time control scheme is designed by integrating multi power reaching (MPR) law and finite-time disturbance observer (FTDO) into integral sliding mode control, where a novel sliding surface is designed, and the FTDO is applied to estimate the uncertainty. Then the fixed-time reachability of the MPR law is analyzed, and the finite-time stability of the closed-loop system is proven in the framework of Lyapunov stability theory. Finally, numerical simulation and the application to the flight control of hypersonic vehicle (HSV) are provided to show the effectiveness of the designed controller

Variable structure attitude control for a rolling aerial vehicle via extended state observer

A novel attitude control scheme is proposed for a rolling aerial vehicle (RAV) with large uncertainties. Firstly, the RAV highly coupled nonlinear system is separated into attitude loop and angular loop via backstepping technique. The nominal states are calculated based on the procedure of trajectory linearization control (TLC). Then, extended state observers (ESO) are applied to estimate the uncertainties in the RAV system. Meanwhile, a feedback linearization-based controller is synthesized for the attitude loop using the estimated uncertainties, and an ESO-based sliding mode controller is synthesized for the angular rate loop. The stability of the closed-loop system is studied. Simulation results with comparisons are presented to demonstrate the feasibility of the proposed control scheme

Investigations of Model-Free Sliding Mode Control Algorithms including Application to Autonomous Quadrotor Flight

Sliding mode control is a robust nonlinear control algorithm that has been used to implement tracking controllers for unmanned aircraft systems that are robust to modeling uncertainty and exogenous disturbances, thereby providing excellent performance for autonomous operation. A significant advance in the application of sliding mode control for unmanned aircraft systems would be adaptation of a model-free sliding mode control algorithm, since the most complex and time-consuming aspect of implementation of sliding mode control is the derivation of the control law with incorporation of the system model, a process required to be performed for each individual application of sliding mode control. The performance of four different model-free sliding mode control algorithms was compared in simulation using a variety of aerial system models and real-world disturbances (e.g. the effects of discretization and state estimation). The two best performing algorithms were shown to exhibit very similar behavior. These two algorithms were implemented on a quadrotor (both in simulation and using real-world hardware) and the performance was compared to a traditional PID-based controller using the same state estimation algorithm and control setup. Simulation results show the model-free sliding mode control algorithms exhibit similar performance to PID controllers without the tedious tuning process. Comparison between the two model-free sliding mode control algorithms showed very similar performance as measured by the quadratic means of tracking errors. Flight testing showed that while a model-free sliding mode control algorithm is capable of controlling realworld hardware, further characterization and significant improvements are required before it is a viable alternative to conventional control algorithms. Large tracking errors were observed for both the model-free sliding mode control and PID based flight controllers and the performance was characterized as unacceptable for most applications. The poor performance of both controllers suggests tracking errors could be attributed to errors in state estimation, which effectively introduce unknown dynamics into the feedback loop. Further testing with improved state estimation would allow for more conclusions to be drawn about the performance characteristics of the model-free sliding mode control algorithms

Discrete Sliding Mode Control for Hypersonic Cruise Missile

A discrete variable structure control (DVSC) with sliding vector is presented to track the velocity and acceleration command for a hypersonic cruise missile. In the design an integrator is augmented to ensure the tracking with zero steady-state errors. Furthermore the sliding surface of acceleration is designed using the error of acceleration and acceleration rate to avoid the singularity of control matrix. A proper power rate reaching law is utilized in this proposal; therefore the state trajectory from any initial point can be driven into the sliding surface. Besides, in order to validate the robustness of controller, the unmolded dynamic and parameter disturbance of the missile are considered. Through simulation the proposed controller demonstrates good performance in tracking velocity and acceleration command

Fault Diagnosis Techniques for Linear Sampled Data Systems and a Class of Nonlinear Systems

This thesis deals with the fault diagnosis design problem both for dynamical continuous time systems whose output signal are affected by fixed point quantization,\ud referred as sampled-data systems, and for two different applications whose dynamics are inherent high nonlinear: a remotely operated underwater vehicle and a scramjet-powered hypersonic vehicle.\ud Robustness is a crucial issue. In sampled-data systems, full decoupling of disturbance terms from faulty signals becomes more difficult after discretization.\ud In nonlinear processes, due to hard nonlinearity or the inefficiency of linearization, the “classical” linear fault detection and isolation and fault tolerant control methods may not be applied.\ud Some observer-based fault detection and fault tolerant control techniques are studied throughout the thesis, and the effectiveness of such methods are validated with simulations. The most challenging trade-off is to increase sensitivity to faults and robustness to other unknown inputs, like disturbances. Broadly speaking, fault detection filters are designed in order to generate analytical diagnosis functions, called residuals, which should be independent with respect to the system operating state and should be decoupled from disturbances. Decisions on the occurrence of a possible fault are therefore taken on the basis such residual signals

Continuous Recursive Sliding Mode Control for Hypersonic Flight Vehicle with Extended Disturbance Observer

A continuous recursive sliding mode controller (CRSMC) with extended disturbance observer (EDO) is proposed for the longitudinal dynamics of a generic hypersonic flight vehicle (HFV) in the presence of multiple uncertainties under control constraints. Firstly, sliding mode tracking controller based on a set of novel recursive sliding mode manifolds is presented, in which the chattering problem is reduced. The CRSMC possesses the merits of both nonsingular terminal sliding mode controller (NTSMC) and high-order sliding mode controller (HOSMC). Then antiwindup controller is designed according to the input constraints, which adds a dynamic compensation factor in the CRSMC. For the external disturbance of system, an improved disturbance observer based on extended disturbance observer (EDO) is designed. The external disturbance is estimated by the disturbance observer and the estimated value is regarded as compensation in CRSMC for disturbance. The stability of the proposed scheme is analyzed by Lyapunov function theory. Finally, numerical simulation is conducted for cruise flight dynamics of HFV, where altitude is 110000 ft, velocity is 15060 ft/s, and Mach is 15. Simulation results show the validity of the proposed approach

Fault tolerant longitudinal aircraft control using non-linear integral sliding mode

Copyright © 2014 Institution of Engineering and Technology (IET)This study proposes a novel non-linear fault tolerant scheme for longitudinal control of an aircraft system, comprising an integral sliding mode control allocation scheme and a backstepping structure. In fault free conditions, the closed loop system is governed by the backstepping controller and the integral sliding mode control allocation scheme only influences the performance if faults/failures occur in the primary control surfaces. In this situation, the allocation scheme redistributes the control signals to the secondary control surfaces and the scheme is able to tolerate total failures in the primary actuator. A backstepping scheme taken from the existing literature is designed for flight path angle tracking (based on the non-linear equations of motion) and this is used as the underlying baseline controller in nominal conditions. The efficacy of the scheme is demonstrated using a high-fidelity aircraft benchmark model. Excellent results are obtained in the presence of plant/model uncertainty in both fault free and faulty conditions

The Design of Fixed-Time Observer and Finite-Time Fault-Tolerant Control for Hypersonic Gliding Vehicles

This paper proposes a fault-tolerant control scheme for a hypersonic gliding vehicle to counteract actuator faults and model uncertainties. Starting from the kinematic and aerodynamic models of the hypersonic vehicle, the control-oriented model subject to actuator faults is built. The observers are designed to estimate the information of actuator faults and model uncertainties, and to guarantee the estimation errors for converging to zero in fixed settling time. Subsequently, the finite-time multivariable terminal sliding mode control and composite-loop design are pursued to enable integration into the faulttolerant control, which can ensure the safety of the postfault vehicle in a timely manner. Simulation studies of a six degree-of-freedom nonlinear model of the hypersonic gliding vehicle are carried out to manifest the effectiveness of the investigated fault-tolerant control system