A QHD-capable parallel H.264 decoder

Video coding follows the trend of demanding higher performance every new generation, and therefore could utilize many-cores. A complete parallelization of H.264, which is the most advanced video coding standard, was found to be difficult due to the complexity of the standard. In this paper a parallel implementation of a complete H.264 decoder is presented. Our parallelization strategy exploits function-level as well as data-level parallelism. Function-level parallelism is used to pipeline the H.264 decoding stages. Data-level parallelism is exploited within the two most time consuming stages, the entropy decoding stage and the macroblock decoding stage. The parallelization strategy has been implemented and optimized on three platforms with very different memory architectures, namely an 8-core SMP, a 64-core cc-NUMA, and an 18-core Cell platform. Evaluations have been performed using 4kx2k QHD sequences. On the SMP platform a maximum speedup of 4.5x is achieved. The SMP-implementation is reasonably performance portable as it achieves a speedup of 26.6x on the cc-NUMA system. However, to obtain the highest performance (speedup of 33.4x and throughput of 200 QHD frames per second), several cc-NUMA specific optimizations are necessary such as optimizing the page placement and statically assigning threads to cores. Finally, on the Cell platform a near ideal speedup of 16.5x is achieved by completely hiding the communication latency.EC/FP7/248647/EU/ENabling technologies for a programmable many-CORE/ENCOR

A highly scalable parallel implementation of H.264

Developing parallel applications that can harness and efficiently use future many-core architectures is the key challenge for scalable computing systems. We contribute to this challenge by presenting a parallel implementation of H.264 that scales to a large number of cores. The algorithm exploits the fact that independent macroblocks (MBs) can be processed in parallel, but whereas a previous approach exploits only intra-frame MB-level parallelism, our algorithm exploits intra-frame as well as inter-frame MB-level parallelism. It is based on the observation that inter-frame dependencies have a limited spatial range. The algorithm has been implemented on a many-core architecture consisting of NXP TriMedia TM3270 embedded processors. This required to develop a subscription mechanism, where MBs are subscribed to the kick-off lists associated with the reference MBs. Extensive simulation results show that the implementation scales very well, achieving a speedup of more than 54 on a 64-core processor, in which case the previous approach achieves a speedup of only 23. Potential drawbacks of the 3D-Wave strategy are that the memory requirements increase since there can be many frames in flight, and that the frame latency might increase. Scheduling policies to address these drawbacks are also presented. The results show that these policies combat memory and latency issues with a negligible effect on the performance scalability. Results analyzing the impact of the memory latency, L1 cache size, and the synchronization and thread management overhead are also presented. Finally, we present performance requirements for entropy (CABAC) decoding. This work was performed while the fourth author was with NXP Semiconductors.Peer ReviewedPostprint (author's final draft

A parallel H.264/SVC encoder for high definition video conferencing

In this paper we present a video encoder specially developed and configured for high definition (HD) video conferencing. This video encoder brings together the following three requirements: H.264/Scalable Video Coding (SVC), parallel encoding on multicore platforms, and parallel-friendly rate control. With the first requirement, a minimum quality of service to every end-user receiver over Internet Protocol networks is guaranteed. With the second one, real-time execution is accomplished and, for this purpose, slice-level parallelism, for the main encoding loop, and block-level parallelism, for the upsampling and interpolation filtering processes, are combined. With the third one, a proper HD video content delivery under certain bit rate and end-to-end delay constraints is ensured. The experimental results prove that the proposed H.264/SVC video encoder is able to operate in real time over a wide range of target bit rates at the expense of reasonable losses in rate-distortion efficiency due to the frame partitioning into slices

Parallel scalability and efficiency of HEVC parallelization approaches

Unlike H.264/advanced video coding, where parallelism was an afterthought, High Efficiency Video Coding currently contains several proposals aimed at making it more parallel-friendly. A performance comparison of the different proposals, however, has not yet been performed. In this paper, we will fill this gap by presenting efficient implementations of the most promising parallelization proposals, namely tiles and wavefront parallel processing (WPP). In addition, we present a novel approach called overlapped wavefront (OWF), which achieves higher performance and efficiency than tiles and WPP. Experiments conducted on a 12-core system running at 3.33 GHz show that our implementations achieve average speedups, for 4k sequences, of 8.7, 9.3, and 10.7 for WPP, tiles, and OWF, respectively

Parallel scalability of video decoders

An important question is whether emerging and future applications exhibit sufficient parallelism, in particular thread-level parallelism, to exploit the large numbers of cores future chip multiprocessors (CMPs) are expected to contain. As a case study we investigate the parallelism available in video decoders, an important application domain now and in the future. Specifically, we analyze the parallel scalability of the H.264 decoding process. First we discuss the data structures and dependencies of H.264 and show what types of parallelism it allows to be exploited. We also show that previously proposed parallelization strategies such as slice-level, frame-level, and intra-frame macroblock (MB) level parallelism, are not sufficiently scalable. Based on the observation that inter-frame dependencies have a limited spatial range we propose a new parallelization strategy, called Dynamic 3D-Wave. It allows certain MBs of consecutive frames to be decoded in parallel. Using this new strategy we analyze the limits to the available MB-level parallelism in H.264. Using real movie sequences we find a maximum MB parallelism ranging from 4000 to 7000. We also perform a case study to assess the practical value and possibilities of a highly parallelized H.264 application. The results show that H.264 exhibits sufficient parallelism to efficiently exploit the capabilities of future manycore CMPs.Peer ReviewedPostprint (published version

Evaluation of parallel H.264 decoding strategies for the Cell Broadband Engine

How to develop efficient and scalable parallel applications is the key challenge for emerging many-core architectures. We investigate this question by implementing and comparing two parallel H.264 decoders on the Cell architecture. It is expected that future many-cores will use a Cell-like local store memory hierarchy, rather than a non-scalable shared memory. The two implemented parallel algorithms, the Task Pool (TP) and the novel Ring-Line (RL) approach, both exploit macroblock-level parallelism. The TP implementation follows the master-slave paradigm and is very dynamic so that in theory perfect load balancing can be achieved. The RL approach is distributed and more predictable in the sense that the mapping of macroblocks to processing elements is fixed. This allows to better exploit data locality, to overlap communication with computation, and to reduce communication and synchronization overhead. While TP is more scalable in theory, the actual scalability favors RL. Using 16 SPEs, RL obtains a scalability of 12x, while TP achieves only 10.3x. More importantly, the absolute performance of RL is much higher. Using 16 SPEs, RL achieves a throughput of 139.6 frames per second (fps) while TP achieves only 76.6 fps. A large part of the additional performance advantage is due to hiding the memory latency. From the results we conclude that in order to fully leverage the performance of future many-cores, a centralized master should be avoided and the mapping of tasks to cores should be predictable in order to be able to hide the memory latency

Markov Decision Process Based Energy-Efficient On-Line Scheduling for Slice-Parallel Video Decoders on Multicore Systems

We consider the problem of energy-efficient on-line scheduling for slice-parallel video decoders on multicore systems. We assume that each of the processors are Dynamic Voltage Frequency Scaling (DVFS) enabled such that they can independently trade off performance for power, while taking the video decoding workload into account. In the past, scheduling and DVFS policies in multi-core systems have been formulated heuristically due to the inherent complexity of the on-line multicore scheduling problem. The key contribution of this report is that we rigorously formulate the problem as a Markov decision process (MDP), which simultaneously takes into account the on-line scheduling and per-core DVFS capabilities; the power consumption of the processor cores and caches; and the loss tolerant and dynamic nature of the video decoder's traffic. In particular, we model the video traffic using a Direct Acyclic Graph (DAG) to capture the precedence constraints among frames in a Group of Pictures (GOP) structure, while also accounting for the fact that frames have different display/decoding deadlines and non-deterministic decoding complexities. The objective of the MDP is to minimize long-term power consumption subject to a minimum Quality of Service (QoS) constraint related to the decoder's throughput. Although MDPs notoriously suffer from the curse of dimensionality, we show that, with appropriate simplifications and approximations, the complexity of the MDP can be mitigated. We implement a slice-parallel version of H.264 on a multiprocessor ARM (MPARM) virtual platform simulator, which provides cycle-accurate and bus signal-accurate simulation for different processors. We use this platform to generate realistic video decoding traces with which we evaluate the proposed on-line scheduling algorithm in Matlab

Dynamic Resource Management of Network-on-Chip Platforms for Multi-stream Video Processing

This thesis considers resource management in the context of parallel multiple video stream decoding, on multicore/many-core platforms. Such platforms have tens or hundreds of on-chip processing elements which are connected via a Network-on-Chip (NoC). Inefficient task allocation configurations can negatively affect the communication cost and resource contention in the platform, leading to predictability and performance issues. Efficient resource management for large-scale complex workloads is considered a challenging research problem; especially when applications such as video streaming and decoding have dynamic and unpredictable workload characteristics. For these type of applications, runtime heuristic-based task mapping techniques are required. As the application and platform size increase, decentralised resource management techniques are more desirable to overcome the reliability and performance bottlenecks in centralised management. In this work, several heuristic-based runtime resource management techniques, targeting real-time video decoding workloads are proposed. Firstly, two admission control approaches are proposed; one fully deterministic and highly predictable; the other is heuristic-based, which balances predictability and performance. Secondly, a pair of runtime task mapping schemes are presented, which make use of limited known application properties, communication cost and blocking-aware heuristics. Combined with the proposed deterministic admission controller, these techniques can provide strict timing guarantees for hard real-time streams whilst improving resource usage. The third contribution in this thesis is a distributed, bio-inspired, low-overhead, task re-allocation technique, which is used to further improve the timeliness and workload distribution of admitted soft real-time streams. Finally, this thesis explores parallelisation and resource management issues, surrounding soft real-time video streams that have been encoded using complex encoding tools and modern codecs such as High Efficiency Video Coding (HEVC). Properties of real streams and decoding trace data are analysed, to statistically model and generate synthetic HEVC video decoding workloads. These workloads are shown to have complex and varying task dependency structures and resource requirements. To address these challenges, two novel runtime task clustering and mapping techniques for Tile-parallel HEVC decoding are proposed. These strategies consider the workload communication to computation ratio and stream-specific characteristics to balance predictability improvement and communication energy reduction. Lastly, several task to memory controller port assignment schemes are explored to alleviate performance bottlenecks, resulting from memory traffic contention