1,268 research outputs found
Neutral Point Clamped Transformerless Multilevel Converter for Grid-Connected Photovoltaic System
Transformer-less (TL) inverter topologies have elicited further special treatment in photo-voltaic (PV) power system as they provide high efficiency and low cost. Neutral point clamped (NPC) multilevel-inverter (MLI) topologies-based transformer-less are being immensely used in grid-connected medium-voltage high-power claims. Unfortunately, these topologies such as NPC-MLI, full-bridge inverter with DC bypass (FB-DCBP) suffer from the shoot-through problem on the bridge legs, which affect the reliability of the implementation. Based on the previous above credits, a T type neutral point clamped (TNP) - MLI (TNP-MLI) with Transformer-less topology called TL-TNP-MLI is presented to be an alternate which can be suitable in the grid connected PV power generation systems. The suggested TL-TNP-MLI topologies free from inverter bridge legs shoot-through burden, switching frequency common-mode current (CMC), and leakage current. The control system of the grid interface with hysteresis current control (HCC) strategy is proposed. The effectiveness of the proposed PV connected transformer-less TNP-MLI topology with different grid and PV scenario has been verified through the MATLAB/Simulink simulation model and field-programmable gate area (FPGA) based experimental results for a 1.5 kW system.publishedVersio
Hardware Approach To Mitigate The Effects Of Module Mismatch In A Grid-Connected Photovoltaic System: A Review
This study reviews the hardware approach to mitigate the effects of module mismatch in a grid-connected photovoltaic (PV) system. Unlike software solutions, i.e. the maximum power tracking algorithm, hardware techniques are well suited to enhance energy yield because of their inherent ability to extract energy from the mismatched module. Despite the extra cost of the additional circuitry, hardware techniques have recently gained popularity because of their long-term financial benefits. Notwithstanding the growing interest in this topic, review papers that provide updates on the technological developments of the three main hardware solutions, namely micro inverter,DC power optimizer, and energy recovery circuits, are lacking. This is in contrast to software solutions, which have had a considerable number of reputable reviews. Thus, a comprehensive review paper is appropriate at this juncture to provide up-to-date information on the latest topologies, highlight their merits/drawbacks, and evaluate their comparative performance
Power electronics technologies for renewable energy sources
Over the last decades, power grids are facing significant improvements mainly due to the
integration of more and more technologies. In particular, renewable energy sources (RES) are
contributing to moving from centralized energy production to a new paradigm of distributed
energy production. Analyzing in more detail the requirements of the diverse technologies of
RES, it is possible to identify a common and key point: power electronics. In fact, power
electronics is the key technology to embrace the RES technologies towards controllability and
the success of sustainability of power grids. In this context, this book chapter is focused on the
analysis of diverse RES technologies from the point of view of power electronics, including
the introduction and explanation of the operating principle of the most relevant RES, both in
onshore and offshore scenarios. Additionally, are also presented the main topologies of power
electronics converters used in the interface of RES.(undefined
Power Converters in Power Electronics
In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters
Analysis and Design of Solar Power System Interface Utility Using ZVS Converter
The solar power generation system with minimal losses, high simplicity and easy control is attempted in this work, by developing a grid-tied zero-voltage switching (ZVS) inverter with a less number of power conversion stages and the least count of passive components, for single-phase applications that are suitable for conversion from low-voltage DC (40-60 V) to line voltage AC (230 VAC; RMS) at average power levels of 175 W and below. The ZVS full-bridge inverter fed from a PV panel is working on higher frequency with an asymmetric auxiliary circuit, which guarantees ZVS at the switching instants of the metal-oxide-semiconductor field-effect transistors (MOSFETs) by supplying the reactive current to these full-bridge semiconductor switches and reducing the switching losses. Checking of the constructional workability and analytical feasibility of the proposed topology with the highest efficiency and the simplest control was the target of this work, which was set on the basis of the results obtained in the MATLAB Simulink environment. The control strategies were planned for the optimum value of the reactive current injected by the auxiliary circuit to guarantee ZVS and use of phase shifted pulsewidth modulation (PWM) with varying frequencies for the full-bridge inverter and half-bridge cyclo-converter. The hybrid maximum power point tracking (MPPT) was part of this plan used to set the power at its maximum value against the environmental changes.Citation:Â Deshbhratar, R. G., and Renge, M. M. (2018). Analysis and Design of Solar Power System Interface Utility Using ZVS Converter. Trends in Renewable Energy, 4, 83-101. DOI: 10.17737/tre.2018.4.3.005
Triple-Mode Flying Inductor Common-Ground PV Inverter with Reactive Power Capability and Low Semiconductor Component Count
This paper proposes the flying inductor based common ground single-phase PV inverter which can support reactive power to the ac grid. The proposed buck-boost transformerless PV inverter eliminates the leakage current and is suitable for use in on-grid applications which require active and reactive power support. The proposed converter also features a low number of semiconductor devices, no ac type capacitor, acceptable quality of the grid side current even during non-unity power factor operations, reducing switching loss by adopting time-sharing technique, and high efficiency. The converter uses a dead-beat controller in the control loop which has a smooth, accurate and fast response. Experimental results for a 500 W, 100 Vdc and 180 Vdc to 110 Vrms, prototype is provided in a closed-loop system in the presence of the proposed dead-beat controller. The results from the prototype validate the theoretical analysis and the applicability of the proposed structure. The converter exhibits the capability for stepping up the dc to ac power conversion and demonstrates a peak efficiency of 97.2% and 96.8% from 180 Vdc and 100 Vdc, respectively
- …