5G Synchronization, Positioning, and Mapping from Diffuse Multipath

5G mmWave communication systems have the potential to jointly estimate the positions of user equipment (UE) and mapping their propagation environments using a single base station. But such potential depends on the characteristics of the reflecting surfaces, such as a deterministic specular nature, a stochastic diffuse/scattering nature, or a combination of both. In this letter, we proposed a 5G positioning and mapping algorithm with unknown orientation and clock bias for single-bounce diffuse multipath channel models. The method is able to accurately localize, calibrate and synchronize the UE, even in the absence of line-of-sight and specular components. This enables robust positioning and mapping using only diffuse multipath

Power Allocation and Parameter Estimation for Multipath-based 5G Positioning

We consider a single-anchor multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system with imperfectly synchronized transmitter (Tx) and receiver (Rx) clocks, where the Rx estimates its position based on the received reference signals. The Tx, having (imperfect) prior knowledge about the Rx location and the surrounding geometry, transmits the reference signals based on a set of fixed beams. In this work, we develop strategies for the power allocation among the beams aiming to minimize the expected Cram\'er-Rao lower bound (CRLB) for Rx positioning. Additional constraints on the design are included to ensure that the line-of-sight (LOS) path is detected with high probability. Furthermore, the effect of clock asynchronism on the resulting allocation strategies is also studied. We also propose a gridless compressed sensing-based position estimation algorithm, which exploits the information on the clock offset provided by non-line-of-sight paths, and show that it is asymptotically efficient.Comment: 30 pages, 6 figures, submitted to IEEE Transactions on Wireless Communication

Power Allocation and Parameter Estimation for Multipath-based 5G Positioning

We consider a single-anchor multiple-input multiple-output orthogonal frequency-division multiplexing system with imperfectly synchronized transmitter (Tx) and receiver (Rx) clocks, where the Rx estimates its position based on the received reference signals. The Tx, having (imperfect) prior knowledge about the Rx location and the surrounding geometry, transmits reference signals based on a set of fixed beams. We develop strategies for the power allocation among the beams aiming to minimize the expected Cram\ue9r-Rao lower bound for Rx positioning. Additional constraints on the design are included to make the optimized power allocation robust to uncertainty on the line-of-sight (LOS) path direction. Furthermore, the effect of clock asynchronism on the proposed allocation strategies is studied. Our evaluation results show that, for non-negligible synchronization error, it is optimal to allocate a large fraction of the available power for the illumination of the non-LOS (NLOS) paths, which help resolve the clock offset. In addition, the complexity reduction achieved by our proposed suboptimal approach incurs only a small performance degradation. We also propose an off-grid compressed sensing-based position estimation algorithm, which exploits the information on the clock offset provided by NLOS paths, and show that it is asymptotically efficient

Map-Aware Models for Indoor Wireless Localization Systems: An Experimental Study

The accuracy of indoor wireless localization systems can be substantially enhanced by map-awareness, i.e., by the knowledge of the map of the environment in which localization signals are acquired. In fact, this knowledge can be exploited to cancel out, at least to some extent, the signal degradation due to propagation through physical obstructions, i.e., to the so called non-line-of-sight bias. This result can be achieved by developing novel localization techniques that rely on proper map-aware statistical modelling of the measurements they process. In this manuscript a unified statistical model for the measurements acquired in map-aware localization systems based on time-of-arrival and received signal strength techniques is developed and its experimental validation is illustrated. Finally, the accuracy of the proposed map-aware model is assessed and compared with that offered by its map-unaware counterparts. Our numerical results show that, when the quality of acquired measurements is poor, map-aware modelling can enhance localization accuracy by up to 110% in certain scenarios.Comment: 13 pages, 11 figures, 1 table. IEEE Transactions on Wireless Communications, 201

Research Trend Topic Area on Mobile Anchor Localization: A Systematic Mapping Study

Localization in a dynamic environment is one of the challenges in WSN localization involving dynamic sensor nodes or anchor nodes. Mobile anchors can be an efficient solution for the number of anchors in a 3-dimensional environment requiring more local anchors. The reliability of a localization system using mobile anchors is determined by various parameters such as energy efficiency, coverage, computational complexity, and cost. Various methods have been proposed by researchers to build a reliable mobile anchor localization system. This certainly shows the many research opportunities that can be carried out in mobile anchor localization. The many opportunities in this topic will be very confusing for researchers who want to research in this field in choosing a topic area early. However, until now there is still no paper that discusses systematic mapping studies that can provide information on topic areas and trends in the field of mobile anchor localization. A systematic Mapping Study (SMS) was conducted to determine the topic area and its trends, influential authors, and produce modeling topics and trends from the resulting modeling topics. This SMS can be a solution for researchers who are interested in research in the field of mobile anchor localization in determining the research topics they are interested in for further research. This paper gives information on the mobile anchor research area, the author who has influenced mobile anchor localization research, and the topic modeling and trend that potentially promissing research in the future. The SMS includes a chronology of publications from 2017-2022, bibliometric co-occurrence, co-author analysis, topic modeling, and trends. The results show that the development of mobile anchor localization publications is still developing until 2022. There are 10 topic models with 6 of them included in the promising topic. The results of this SMS can be used as preliminary research from the literacy stage, namely Systematic Literature Review (SLR)

Direct communication radio Iinterface for new radio multicasting and cooperative positioning

Cotutela: Universidad de defensa UNIVERSITA’ MEDITERRANEA DI REGGIO CALABRIARecently, the popularity of Millimeter Wave (mmWave) wireless networks has increased due to their capability to cope with the escalation of mobile data demands caused by the unprecedented proliferation of smart devices in the fifth-generation (5G). Extremely high frequency or mmWave band is a fundamental pillar in the provision of the expected gigabit data rates. Hence, according to both academic and industrial communities, mmWave technology, e.g., 5G New Radio (NR) and WiGig (60 GHz), is considered as one of the main components of 5G and beyond networks. Particularly, the 3rd Generation Partnership Project (3GPP) provides for the use of licensed mmWave sub-bands for the 5G mmWave cellular networks, whereas IEEE actively explores the unlicensed band at 60 GHz for the next-generation wireless local area networks. In this regard, mmWave has been envisaged as a new technology layout for real-time heavy-traffic and wearable applications. This very work is devoted to solving the problem of mmWave band communication system while enhancing its advantages through utilizing the direct communication radio interface for NR multicasting, cooperative positioning, and mission-critical applications. The main contributions presented in this work include: (i) a set of mathematical frameworks and simulation tools to characterize multicast traffic delivery in mmWave directional systems; (ii) sidelink relaying concept exploitation to deal with the channel condition deterioration of dynamic multicast systems and to ensure mission-critical and ultra-reliable low-latency communications; (iii) cooperative positioning techniques analysis for enhancing cellular positioning accuracy for 5G+ emerging applications that require not only improved communication characteristics but also precise localization. Our study indicates the need for additional mechanisms/research that can be utilized: (i) to further improve multicasting performance in 5G/6G systems; (ii) to investigate sideline aspects, including, but not limited to, standardization perspective and the next relay selection strategies; and (iii) to design cooperative positioning systems based on Device-to-Device (D2D) technology

Unbalanced Hybrid AOA/RSSI Localization for Simplified Wireless Sensor Networks

Source positioning using hybrid angle-of-arrival (AOA) estimation and received signal strength indicator (RSSI) is attractive because no synchronization is required among unknown nodes and anchors. Conventionally, hybrid AOA/RSSI localization combines the same number of these measurements to estimate the agents’ locations. However, since AOA estimation requires anchors to be equipped with large antenna arrays and complicated signal processing, this conventional combination makes the wireless sensor network (WSN) complicated. This paper proposes an unbalanced integration of the two measurements, called 1AOA/nRSSI, to simplify the WSN. Instead of using many anchors with large antenna arrays, the proposed method only requires one master anchor to provide one AOA estimation, while other anchors are simple single-antenna transceivers. By simply transforming the 1AOA/1RSSI information into two corresponding virtual anchors, the problem of integrating one AOA and N RSSI measurements is solved using the least square and subspace methods. The solutions are then evaluated to characterize the impact of angular and distance measurement errors. Simulation results show that the proposed network achieves the same level of precision as in a fully hybrid nAOA/nRSSI network with a slightly higher number of simple anchors

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

Security in Mobile Networks: Communication and Localization

Nowadays the mobile networks are everywhere. The world is becoming more dependent on wireless and mobile services, but the rapid growth of these technologies usually underestimates security aspects. As wireless and mobile services grow, weaknesses in network infrastructures become clearer. One of the problems is privacy. Wireless technologies can reduce costs, increase efficiencies, and make important information more readily and widely available. But, there are also risks. Without appropriate safeguards, these data can be read and modified by unauthorized users. There are many solutions, less and more effective, to protect the data from unauthorized users. But, a specific application could distinguish more data flows between authorized users. Protect the privacy of these information between subsets of users is not a trivial problem. Another problem is the reliability of the wireless service. Multi-vehicle systems composed of Autonomous Guided Vehicles (AGVs) are largely used for industrial transportation in manufacturing and logistics systems. These vehicles use a mobile wireless network to exchange information in order to coordinate their tasks and movements. The reliable dissemination of these information is a crucial operation, because the AGVs may achieve an inconsistent view of the system leading to the failure of the coordination task. This has clear safety implications. Going more in deep, even if the communication are confidential and reliable, anyway the positioning information could be corrupted. Usually, vehicles get the positioning information through a secondary wireless network system such as GPS. Nevertheless, the widespread civil GPS is extremely fragile in adversarial scenarios. An insecure distance or position estimation could produce security problems such as unauthorized accesses, denial of service, thefts, integrity disruption with possible safety implications and intentional disasters. In this dissertation, we face these three problems, proposing an original solution for each one

Wireless Sensor Data Transport, Aggregation and Security

abstract: Wireless sensor networks (WSN) and the communication and the security therein have been gaining further prominence in the tech-industry recently, with the emergence of the so called Internet of Things (IoT). The steps from acquiring data and making a reactive decision base on the acquired sensor measurements are complex and requires careful execution of several steps. In many of these steps there are still technological gaps to fill that are due to the fact that several primitives that are desirable in a sensor network environment are bolt on the networks as application layer functionalities, rather than built in them. For several important functionalities that are at the core of IoT architectures we have developed a solution that is analyzed and discussed in the following chapters. The chain of steps from the acquisition of sensor samples until these samples reach a control center or the cloud where the data analytics are performed, starts with the acquisition of the sensor measurements at the correct time and, importantly, synchronously among all sensors deployed. This synchronization has to be network wide, including both the wired core network as well as the wireless edge devices. This thesis studies a decentralized and lightweight solution to synchronize and schedule IoT devices over wireless and wired networks adaptively, with very simple local signaling. Furthermore, measurement results have to be transported and aggregated over the same interface, requiring clever coordination among all nodes, as network resources are shared, keeping scalability and fail-safe operation in mind. Furthermore ensuring the integrity of measurements is a complicated task. On the one hand Cryptography can shield the network from outside attackers and therefore is the first step to take, but due to the volume of sensors must rely on an automated key distribution mechanism. On the other hand cryptography does not protect against exposed keys or inside attackers. One however can exploit statistical properties to detect and identify nodes that send false information and exclude these attacker nodes from the network to avoid data manipulation. Furthermore, if data is supplied by a third party, one can apply automated trust metric for each individual data source to define which data to accept and consider for mentioned statistical tests in the first place. Monitoring the cyber and physical activities of an IoT infrastructure in concert is another topic that is investigated in this thesis.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201