9,479 research outputs found
Single Carrier Architecture for High Data Rate Wireless PAN Communications System
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system is developed
at IETR. As the 60 GHz radio link operates only in a single-room configuration,
an additional Radio over Fibre (RoF) link is used to ensure the communications
in all the rooms of a residential environment. The realized system covers 2 GHz
bandwidth. Due to the hardware constraints, a symbol rate at 875 Mbps is
attained using simple single carrier architecture. In the baseband (BB)
processing block, an original byte/frame synchronization process is designed to
provide a smaller value of the preamble missing detection and false alarm
probabilities. Bit error rate (BER) measurements have been realized in a large
gym for line-of-sight (LOS) conditions. A Tx-Rx distance greater than 30 meters
was attained with low BER using high gain antennas and forward error correction
RS (255, 239) coding.Comment: Design, Experimentation, Measurement, Performance; IWCMC '10, Caen :
France (2010
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
Building Programmable Wireless Networks: An Architectural Survey
In recent times, there have been a lot of efforts for improving the ossified
Internet architecture in a bid to sustain unstinted growth and innovation. A
major reason for the perceived architectural ossification is the lack of
ability to program the network as a system. This situation has resulted partly
from historical decisions in the original Internet design which emphasized
decentralized network operations through co-located data and control planes on
each network device. The situation for wireless networks is no different
resulting in a lot of complexity and a plethora of largely incompatible
wireless technologies. The emergence of "programmable wireless networks", that
allow greater flexibility, ease of management and configurability, is a step in
the right direction to overcome the aforementioned shortcomings of the wireless
networks. In this paper, we provide a broad overview of the architectures
proposed in literature for building programmable wireless networks focusing
primarily on three popular techniques, i.e., software defined networks,
cognitive radio networks, and virtualized networks. This survey is a
self-contained tutorial on these techniques and its applications. We also
discuss the opportunities and challenges in building next-generation
programmable wireless networks and identify open research issues and future
research directions.Comment: 19 page
A Full-Duplex Diversity-Assisted Hybrid Analogue/Digitized Radio Over Fibre for Optical/Wireless Integration
A duplex Radio Over Fibre (ROF) ring architecture is proposed taking into account the constraints imposed by the cost of fibre laying and of the optical/electronic components, as well as the spectral efficiency and the duplex link performance. It has been shown that relying on Analogue ROF (AROF) and state-of-the-art Digitized ROF (DROF) architectures for downlink and uplink transmission, respectively, attains a high-integrity duplex performance. A sophisticated amalgam of Optical Carrier Suppression (OCS), Code Division Multiplexing (CDM), optical frequency multiplexing, Optical Carrier Reuse (OCR) and distributed antennas is conceived
Low-complexity iterative frequency domain decision feedback equalization
Single-carrier transmission with frequency domain equalization (SC-FDE) offers a viable design alternative to the classic orthogonal frequency division multiplexing technique. However, SC-FDE using a linear equalizer may suffer from serious performance deterioration for transmission over severely frequency-selective fading channels. An effective method of solving this problem is to introduce non-linear decision feedback equalization (DFE) to SC-FDE. In this contribution, a low complexity iterative decision feedback equalizer operating in the frequency domain of single-carrier systems is proposed. Based on the minimum mean square error criterion, a simplified parameter estimation method is introduced to calculate the coefficients of the feed-forward and feedback filters, which significantly reduces the implementation complexity of the equalizer. Simulation results show that the performance of the proposed simplified design is similar to the traditional iterative block DFE under various multipath fading channels but it imposes a much lower complexity than the latter
- …