Effectiveness of Automatic Planning of Fronto-orbital Advancement for the Surgical Correction of Metopic Craniosynostosis

The surgical correction of metopic craniosynostosis usually relies on the subjective judgment of surgeons to determine the configuration of the cranial bone fragments and the degree of overcorrection. This study evaluates the effectiveness of a new approach for automatic planning of fronto-orbital advancement based on statistical shape models and including overcorrection.The authors have no financial interest in relation to the content of this article. This work was supported by grants R42 HD081712 (Eunice Kennedy Shriver National Institute of Child Health and Human Development), K99DE027993 (National Institute of Dental and Craniofacial Research), and PI18/01625 (Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III and European Regional Development Fund “Una manera de hacer Europa”)

Optimization of craniosynostosis surgery: virtual planning, intraoperative 3D photography and surgical navigation

Mención Internacional en el título de doctorCraniosynostosis is a congenital defect defined as the premature fusion of one or more cranial sutures. This fusion leads to growth restriction and deformation of the cranium, caused by compensatory expansion parallel to the fused sutures. Surgical correction is the preferred treatment in most cases to excise the fused sutures and to normalize cranial shape. Although multiple technological advancements have arisen in the surgical management of craniosynostosis, interventional planning and surgical correction are still highly dependent on the subjective assessment and artistic judgment of craniofacial surgeons. Therefore, there is a high variability in individual surgeon performance and, thus, in the surgical outcomes. The main objective of this thesis was to explore different approaches to improve the surgical management of craniosynostosis by reducing subjectivity in all stages of the process, from the preoperative virtual planning phase to the intraoperative performance. First, we developed a novel framework for automatic planning of craniosynostosis surgery that enables: calculating a patient-specific normative reference shape to target, estimating optimal bone fragments for remodeling, and computing the most appropriate configuration of fragments in order to achieve the desired target cranial shape. Our results showed that automatic plans were accurate and achieved adequate overcorrection with respect to normative morphology. Surgeons’ feedback indicated that the integration of this technology could increase the accuracy and reduce the duration of the preoperative planning phase. Second, we validated the use of hand-held 3D photography for intraoperative evaluation of the surgical outcome. The accuracy of this technology for 3D modeling and morphology quantification was evaluated using computed tomography imaging as gold-standard. Our results demonstrated that 3D photography could be used to perform accurate 3D reconstructions of the anatomy during surgical interventions and to measure morphological metrics to provide feedback to the surgical team. This technology presents a valuable alternative to computed tomography imaging and can be easily integrated into the current surgical workflow to assist during the intervention. Also, we developed an intraoperative navigation system to provide real-time guidance during craniosynostosis surgeries. This system, based on optical tracking, enables to record the positions of remodeled bone fragments and compare them with the target virtual surgical plan. Our navigation system is based on patient-specific surgical guides, which fit into the patient’s anatomy, to perform patient-to-image registration. In addition, our workflow does not rely on patient’s head immobilization or invasive attachment of dynamic reference frames. After testing our system in five craniosynostosis surgeries, our results demonstrated a high navigation accuracy and optimal surgical outcomes in all cases. Furthermore, the use of navigation did not substantially increase the operative time. Finally, we investigated the use of augmented reality technology as an alternative to navigation for surgical guidance in craniosynostosis surgery. We developed an augmented reality application to visualize the virtual surgical plan overlaid on the surgical field, indicating the predefined osteotomy locations and target bone fragment positions. Our results demonstrated that augmented reality provides sub-millimetric accuracy when guiding both osteotomy and remodeling phases during open cranial vault remodeling. Surgeons’ feedback indicated that this technology could be integrated into the current surgical workflow for the treatment of craniosynostosis. To conclude, in this thesis we evaluated multiple technological advancements to improve the surgical management of craniosynostosis. The integration of these developments into the surgical workflow of craniosynostosis will positively impact the surgical outcomes, increase the efficiency of surgical interventions, and reduce the variability between surgeons and institutions.Programa de Doctorado en Ciencia y Tecnología Biomédica por la Universidad Carlos III de MadridPresidente: Norberto Antonio Malpica González.- Secretario: María Arrate Muñoz Barrutia.- Vocal: Tamas Ung

Computational Evaluation of Potential Correction Methods for Unicoronal Craniosynostosis

Unicoronal craniosynostosis is the second most common type of nonsyndromic craniosynostosis: it is characterized by ipsilateral forehead and fronto-parietal region flattening with contralateral compensatory bossing. It is a complex condition; therefore, which is difficult to treat because of the asymmetry in the orbits, cranium, and face. The aim of this study is to understand optimal osteotomy locations, dimensions, and force requirements for surgical operations of unicoronal craniosynostosis using a patient-specific finite element model and — at the same time — to evaluate the potential application of a new device made from Nitinol which was developed to expand the affected side of a unicoronal craniosynostosis skull without performing osteotomies. The model geometry was reconstructed using Simpleware ScanIP. The bone and sutures were modeled using elastic properties to perform the finite element analyses in MSc Marc software. The simulation results showed that expanding the cranium without osteotomy requires a significant amount of force. Therefore, expansion of the cranium achieved by Nitinol devices may not be sufficient to correct the deformity. Moreover, the size and locations of the osteotomies are crucial for an optimal outcome from surgical operations in unicoronal craniosynostosis

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): Guidelines for medical 3D printing and appropriateness for clinical scenarios

Este número da revista Cadernos de Estudos Sociais estava em organização quando fomos colhidos pela morte do sociólogo Ernesto Laclau. Seu falecimento em 13 de abril de 2014 surpreendeu a todos, e particularmente ao editor Joanildo Burity, que foi seu orientando de doutorado na University of Essex, Inglaterra, e que recentemente o trouxe à Fundação Joaquim Nabuco para uma palestra, permitindo que muitos pudessem dialogar com um dos grandes intelectuais latinoamericanos contemporâneos. Assim, buscamos fazer uma homenagem ao sociólogo argentino publicando uma entrevista inédita concedida durante a sua passagem pelo Recife, em 2013, encerrando essa revista com uma sessão especial sobre a sua trajetória

Measurement of the zygomatic bone and pilot hole technique for safer installation of zygomaticus implants

The zygomaticus implant (Brånemark system, Nobel Biocare, Gotebörg, Sweden) was developed for patients with severe bone resorption of the posterior maxilla, which may eliminate or minimize the need for bone grafting. Although the zygomaticus implant has had a remarkable success rate in a difficult patient population, the method requires an advanced surgical technique and carries increased risk of complications, such as the perforation of the orbital floor or infratemporal fossa. Although it is important to have a detailed understanding of the anatomy of the zygomatic bone when performing the installation, there have been few anatomic studies on the zygomatic bone for installation of zygomaticus implants. In this study, we measured the height and thickness of the zygomatic bone for the installation. The thickness at a 90-degree angle point, where the upper margin of the zygomatic arch and the temporal margin of the frontal process of the zygomatic bone intersect and where the apex of the implant penetrates, according to the original method, was 1.8 ± 0.4 mm, which gradually increased inferiorly and anteriorly. In conclusion, the penetration point of the apex of the zygomaticus implant should be located more inferoanterior to the 90-degree angle point, as the thickness of the 90-degree angle point is thinner than the diameter of the implant. Based on these results, we have proposed a newer and safer installation method for the zygomaticus implant using a drill guide, which can be easily made

A Textbook of Advanced Oral and Maxillofacial Surgery

The scope of OMF surgery has expanded; encompassing treatment of diseases, disorders, defects and injuries of the head, face, jaws and oral cavity. This internationally-recognized specialty is evolving with advancements in technology and instrumentation. Specialists of this discipline treat patients with impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancer, cysts and tumors; they also perform facial cosmetic surgery and place dental implants. The contents of this volume essentially complements the volume 1; with chapters that cover both basic and advanced concepts on complex topics in oral and maxillofacial surgery

A novel RBF-based predictive tool for facial distraction surgery in growing children with syndromic craniosynostosis

PURPOSE: Predicting changes in face shape from corrective surgery is challenging in growing children with syndromic craniosynostosis. A prediction tool mimicking composite bone and skin movement during facial distraction would be useful for surgical audit and planning. To model surgery, we used a radial basis function (RBF) that is smooth and continuous throughout space whilst corresponding to measured distraction at landmarks. Our aim is to showcase the pipeline for a novel landmark-based, RBF-driven simulation for facial distraction surgery in children. METHODS: An individual's dataset comprised of manually placed skin and bone landmarks on operated and unoperated regions. Surgical warps were produced for 'older' monobloc, 'older' bipartition and 'younger' bipartition groups by applying a weighted least-squares RBF fitted to the average landmarks and change vectors. A 'normalisation' warp, from fitting an RBF to craniometric landmark differences from the average, was applied to each dataset before the surgical warp. The normalisation was finally reversed to obtain the individual prediction. Predictions were compared to actual post-operative outcomes. RESULTS: The averaged change vectors for all groups showed skin and bone movements characteristic of the operations. Normalisation for shape-size removed individual asymmetry, size and proportion differences but retained typical pre-operative shape features. The surgical warps removed the average syndromic features. Reversing the normalisation reintroduced the individual's variation into the prediction. The mid-facial regions were well predicted for all groups. Forehead and brow regions were less well predicted. CONCLUSIONS: Our novel, landmark-based, weighted RBF can predict the outcome for facial distraction in younger and older children with a variety of head and face shapes. It can replicate the surgical reality of composite bone and skin movement jointly in one model. The potential applications include audit of existing patient outcomes, and predicting outcome for new patients to aid surgical planning