Automatic programming methodologies for electronic hardware fault monitoring

This paper presents three variants of Genetic Programming (GP) approaches for intelligent online performance monitoring of electronic circuits and systems. Reliability modeling of electronic circuits can be best performed by the Stressor - susceptibility interaction model. A circuit or a system is considered to be failed once the stressor has exceeded the susceptibility limits. For on-line prediction, validated stressor vectors may be obtained by direct measurements or sensors, which after pre-processing and standardization are fed into the GP models. Empirical results are compared with artificial neural networks trained using backpropagation algorithm and classification and regression trees. The performance of the proposed method is evaluated by comparing the experiment results with the actual failure model values. The developed model reveals that GP could play an important role for future fault monitoring systems.This research was supported by the International Joint Research Grant of the IITA (Institute of Information Technology Assessment) foreign professor invitation program of the MIC (Ministry of Information and Communication), Korea

Review of recent research towards power cable life cycle management

Power cables are integral to modern urban power transmission and distribution systems. For power cable asset managers worldwide, a major challenge is how to manage effectively the expensive and vast network of cables, many of which are approaching, or have past, their design life. This study provides an in-depth review of recent research and development in cable failure analysis, condition monitoring and diagnosis, life assessment methods, fault location, and optimisation of maintenance and replacement strategies. These topics are essential to cable life cycle management (LCM), which aims to maximise the operational value of cable assets and is now being implemented in many power utility companies. The review expands on material presented at the 2015 JiCable conference and incorporates other recent publications. The review concludes that the full potential of cable condition monitoring, condition and life assessment has not fully realised. It is proposed that a combination of physics-based life modelling and statistical approaches, giving consideration to practical condition monitoring results and insulation response to in-service stress factors and short term stresses, such as water ingress, mechanical damage and imperfections left from manufacturing and installation processes, will be key to success in improved LCM of the vast amount of cable assets around the world

Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

Diagnosis of Fault Modes Masked by Control Loops with an Application to Autonomous Hovercraft Systems

This paper introduces a methodology for the design, testing and assessment of incipient failure detection techniques for failing components/systems of an autonomous vehicle masked or hidden by feedback control loops. It is recognized that the optimum operation of critical assets (aircraft, autonomous systems, etc.) may be compromised by feedback control loops by masking severe fault modes while compensating for typical disturbances. Detrimental consequences of such occurrences include the inability to detect expeditiously and accurately incipient failures, loss of control and inefficient operation of assets in the form of fuel overconsumption and adverse environmental impact. We pursue a systems engineering process to design, construct and test an autonomous hovercraft instrumented appropriately for improved autonomy. Hidden fault modes are detected with performance guarantees by invoking a Bayesian estimation approach called particle filtering. Simulation and experimental studies are employed to demonstrate the efficacy of the proposed methods

CBR and MBR techniques: review for an application in the emergencies domain

The purpose of this document is to provide an in-depth analysis of current reasoning engine practice and the integration strategies of Case Based Reasoning and Model Based Reasoning that will be used in the design and development of the RIMSAT system. RIMSAT (Remote Intelligent Management Support and Training) is a European Commission funded project designed to: a.. Provide an innovative, 'intelligent', knowledge based solution aimed at improving the quality of critical decisions b.. Enhance the competencies and responsiveness of individuals and organisations involved in highly complex, safety critical incidents - irrespective of their location. In other words, RIMSAT aims to design and implement a decision support system that using Case Base Reasoning as well as Model Base Reasoning technology is applied in the management of emergency situations. This document is part of a deliverable for RIMSAT project, and although it has been done in close contact with the requirements of the project, it provides an overview wide enough for providing a state of the art in integration strategies between CBR and MBR technologies.Postprint (published version

In-Field Solar Panel Assessment and Fault Diagnosis

Photovoltaic energy is a green energy that suit from small houses to high-power stations spanning large areas. In such large areas, monitoring individual panels can be a tedious task, especially if it was required to identify operational faults of these panels. Photovoltaic 4.0 technology depend on collecting data from each station and feeding them to a central processing system that can analyze operation data and hopefully locate when a fault happens. In such method, it is crucial to be accurate as much as possible and for measuring device to be accurate as well to have a clear judgement. In this work, we build an analysis module at the center of a photovoltaic 4.0 station implemented in the American University in Cairo. The model is comprehensive in nature and is capable of modelling from individual cell level to the whole panel level as well as dealing with measurement issues to have a good judgement at the end. The used model is based on single-diode model of a solar panel and is capable of modelling solar panels in different environmental conditions and is validated against datasheet and actual measurement. Source code for the analysis module and the dataset are provided. It was shown that Laudani’s method of parameter extraction is more successful compared to Stonelli’s method and translating circuit parameters at different environmental conditions proved to be successful and matching to datasheets. Besides, it provided sufficient predictions without need to an actual weather station. The proposed analysis module provided insights about dusty conditions and irregularities that may exist in solar panel characterizer

Intermittent fault diagnosis and health monitoring for electronic interconnects

Literature survey and correspondence with industrial sector shows that No-Fault-Found (NFF) is a major concern in through life engineering services, especially for defence, aerospace, and other transport industry. There are various occurrences and root causes that result in NFF events but intermittent interconnections are the most frustrating. This is because it disappears while testing, and missed out by diagnostic equipment. This thesis describes the challenging and most important area of intermittent fault detection and health monitoring that focuses towards NFF situation in electronics interconnections. After introduction, this thesis starts with literature survey and describes financial impact on aerospace and other transport industry. It highlights NFF technologies and discuss different facts and their impact on NFF. Then It goes into experimental study that how repeatedly intermittent fault could be replicated. It describes a novel fault replicator that can generate repeatedly IFs for further experimental study on diagnosis techniques/algorithms. The novel IF replicator provide for single and multipoint intermittent connection. The experimental work focuses on mechanically induced intermittent conditions in connectors. This work illustrates a test regime that can be used to repeatedly reproduce intermittency in electronic connectors whilst subjected to vibration ... [cont.]