Iterative multiuser detection with integrated channel estimation for turbo coded DS-CDMA.

In present days the demand of high bandwidth and data rate in wireless communications is increasing rapidly to accommodate multimedia applications, including services such as wireless video and high-speed Internet access. In this thesis, we propose a receiver algorithm for mobile communications systems which apply CDMA (Code division multiple access) as multiple access technique. Multiuser Detection and turbo coding are the two most powerful techniques for enhancing the performance of future wireless services. The standardization of direct sequence CDMA (DS-CDMA) systems in the third generation of mobile communication system has raised the interest in exploiting the capabilities and capacity of this type of Technology. However the conventional DS-CDMA system has the major drawback of multiple Access Interference (MAI). The MAI is unavoidable because receivers deal with the information which is transmitted not by a single information source but by several uncoordinated and geographically separated sources. To overcome this problem MUD is a promising approach to increase capacity. (Abstract shortened by UMI.)Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .C465. Source: Masters Abstracts International, Volume: 45-01, page: 0404. Thesis (M.Sc.)--University of Windsor (Canada), 2005

Development of Simulation Components for Wireless Communication

abstract: This thesis work present the simulation of Bluetooth and Wi-Fi radios in real life interference environments. When information is transmitted via communication channels, data may get corrupted due to noise and other channel discrepancies. In order to receive the information safely and correctly, error correction coding schemes are generally employed during the design of communication systems. Usually the simulations of wireless communication systems are done in such a way that they focus on some aspect of communications and neglect the others. The simulators available currently will either do network layer simulations or physical layer level simulations. In many situations, simulations are required which show inter-layer aspects of communication systems. For all such scenarios, a simulation environment, WiscaComm which is based on time-domain samples is built. WiscaComm allows the study of network and physical layer interactions in detail. The advantage of time domain sampling is that it allows the simulation of different radios together which is better than the complex baseband representation of symbols. The environment also supports study of multiple protocols operating simultaneously, which is of increasing importance in today's environment.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Hybrid ARQ with parallel and serial concatenated convolutional codes for next generation wireless communications

This research focuses on evaluating the currently used FEC encoding-decoding schemes and improving the performance of error control systems by incorporating these schemes in a hybrid FEC-ARQ environment. Beginning with an overview of wireless communications and the various ARQ protocols, the thesis provides an in-depth explanation of convolutional encoding and Viterbi decoding, turbo (PCCC) and serial concatenated convolutional (SCCC) encoding with their respective MAP decoding strategies.;A type-II hybrid ARQ scheme with SCCCs is proposed for the first time and is a major contribution of this thesis. A vast improvement is seen in the BER performance of the successive individual FEC schemes discussed above. Also, very high throughputs can be achieved when these schemes are incorporated in an adaptive type-II hybrid ARQ system.;Finally, the thesis discusses the equivalence of the PCCCs and the SCCCs and proposes a technique to generate a hybrid code using both schemes

Improving Bandwidth Utilization in a 1 Tbps Airborne MIMO Communications Downlink

FEC techniques are compared for different MIMO configurations of a high altitude, extremely wide bandwidth radio frequency downlink. Monte Carlo simulations are completed in MATLAB® with the aim of isolating the impacts of turbo codes and LDPC codes on system throughput and error performance. The system is modeled as a transmit-only static array at an altitude of 60,000 feet, with no interferers in the channel. Transmissions are received by a static receiver array. Simulations attempt to determine what modulation types should be considered for practical implementation, and what FEC codes enable these modulation schemes. The antenna configurations used in this study are [44:352], [62:248], and [80:160] transmitters to receivers. Effects from waveform generation, mixing, down-conversion, and amplification are not considered. Criteria of interest were BER and throughput, with the maximum allowable value of the former set at 1 x 10-5, and the latter set at a 1 terabits per second (Tbps) transfer rate for a successful configuration. Results show that the best performing system configuration was unable to meet both criteria, but was capable of improving over Brueggen\u27s 2012 research, which used Reed-Solomon codes and a MIMO configuration of [80:160], by 18.6%. The best-case configuration produced a throughput rate of 0.83 Tbps at a BER of less than 1 x 10-8, by implementing a rate 2/3 LDPC code with QAM constellation of 16 symbols

The Telecommunications and Data Acquisition Report

This quarterly publication provides archival reports on developments in programs managed by JPL's Telecommunications and Mission Operations Directorate (TMOD), which now includes the former Telecommunications and Data Acquisition (TDA) Office. In space communications, radio navigation, radio science, and ground-based radio and radar astronomy, it reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standards activity at JPL for space data and information systems and reimbursable DSN work performed for other space agencies through NASA. The preceding work is all performed for NASA's Office of Space Communications (OSC)

Adaptive equalisation for fading digital communication channels

This thesis considers the design of new adaptive equalisers for fading digital communication channels. The role of equalisation is discussed in the context of the functions of a digital radio communication system and both conventional and more recent novel equaliser designs are described. The application of recurrent neural networks to the problem of equalisation is developed from a theoretical study of a single node structure to the design of multinode structures. These neural networks are shown to cancel intersymbol interference in a manner mimicking conventional techniques and simulations demonstrate their sensitivity to symbol estimation errors. In addition the error mechanisms of conventional maximum likelihood equalisers operating on rapidly time-varying channels are investigated and highlight the problems of channel estimation using delayed and often incorrect symbol estimates. The relative sensitivity of Bayesian equalisation techniques to errors in the channel estimate is studied and demonstrates that the structure's equalisation capability is also susceptible to such errors. Applications of multiple channel estimator methods are developed, leading to reduced complexity structures which trade performance for a smaller computational load. These novel structures are shown to provide an improvement over the conventional techniques, especially for rapidly time-varying channels, by reducing the time delay in the channel estimation process. Finally, the use of confidence measures of the equaliser's symbol estimates in order to improve channel estimation is studied and isolates the critical areas in the development of the technique — the production of reliable confidence measures by the equalisers and the statistics of symbol estimation error bursts

16-QAM Hierarchical Modulation Optimization in Relay Cooperative Networks

16-QAM Hierarchical Modulation Optimization in Relay Cooperative Networks Sara Sallam Recently, the concept of cooperative networks has attracted special attention in the field of wireless communications. This is due to their ability in achieving diversity with no extra hardware cost. The main drawback that characterizes cooperative networks is that they require extra transmission time slots compared to the traditional non-cooperative networks. Several strategies have been proposed in order to mitigate this disadvantage. One of the most recently adopted techniques is the use of hierarchical modulation. Hierarchical modulation was originally used in Digital Video Broadcast (DVB) applications. Lately, it has been applied in cooperative networks for its ability to transmit relative high data rate with acceptable performance. In this thesis, the application of a 4/16 QAM hierarchical modulation in cooperative networks is examined. This study focuses on a downlink cellular network scenario, composed of a Base Station, a Relay and two destinations. The Base Station intends to transmit two different streams of data to these two destinations by concatenating the two streams and broadcasting the resulting sequence using a non-uniform 4/16 QAM hierarchical modulation. Unlike previous work, the main contribution in this thesis is the optimization of the 16QAM constellation’s parameters according to each user’s channel condition. In other words, this method gives each user’s data the priority it needs in order to be detected as correctly as possible at the destination. Explicit closed form expressions of Hierarchical modulation Bit Error Rate in relay cooperative networks are derived. These BER expressions are used in order to select the constellation’s parameters that will achieve total minimum BER in coded and un-coded schemes. Results prove that the proposed method achieve noticeable improvement in both users performance compared to the use of uniform 16QAM constellation

Concatenated codes for the multiple-input multiple-output quasi-static fading channel

The use of multiple antennas at the transmitter and/or the receiver promises greatly increased capacity. This can be useful to meet the ever growing demand of wireless connectivity, provided we can find techniques to efficiently exploit the advantages of the Multiple-Input Multiple-Output (MIMO) system. This work explores the MIMO system in a flat quasi-static fading scenario. Such a channel occurs, for example, in packet data systems, where the channel fade is constant for the duration of a codeword and changes independently from one transmission to another. We first show why it is hard to compute the true constrained modulation outage capacity. As an alternative, we present achievable lower bounds to this capacity based on existing space-time codes. The bounds we compute are the fundamental limits to the performance of these space-time codes under maximum-likelihood decoding, optimal outer codes and asymptotically long lengths. These bounds also indicate that MIMO systems have different behavior under Gaussian signaling (unconstrained input) and under the finite alphabet setting. Our results naturally suggest the use of concatenated codes to approach near-capacity performance. However, we show that a system utilizing an iterative decoder has a fundamental limit it cannot be universal and therefore it cannot perform arbitrarily close to its outage limit. Next, we propose two different transceiver structures that have good performance. The first structure is based on a novel BCJR-decision feedback decoder which results in performance within a dB of the outage limit. The second structure is based on recursive realizations of space-time trellis codes and uses iterative decoding at the receiver. This recursive structure has impressive performance even when the channel has time diversity. Thus, it forms the basis of a very flexible and robust MIMO transceiver structure

Near maximum likelihood multiuser receivers for direct sequence code division multiple access

Wideband wireless access based on direct-sequence code-division multiple access (DS-CDMA) has been adopted for third-generation mobile communications systems. Hence, DS-CDMA downlink communications systems form the platform for the work in this thesis. The principles of the spread spectrum concept and DS-CDMA technology are first outlined, including a description of the system model and the conventional receiver. The two classes of codes used in this system, namely spreading codes and forward error correction codes (including Turbo codes), are discussed. Due to the fact that practical communications channels are non-ideal, the performance of an individual user is interference limited. As a result, the capacity of the system is greatly restricted. Fortunately, multiuser detection is a scheme that can effectively counteract this multiple access interference. However, the optimum multiuser detection scheme is far too computationally intensive for practical use. Hence, the fundamental interest here is to retain the advantages of multiuser detection and simplify its implementation. The objective of the thesis is to investigate the optimum multiuser receiver, regarded on a chip level sampling basis. The aim is to reduce the complexity of the optimum receiver to a practical and implementable level while retaining its good performance. The thesis first reviews various existing multiuser receivers. The chip-based maximum likelihood sequence estimation (CBMLSE) detector is formulated and implemented. However, the number of states in the state-transition trellis is still exponential in the number of users. Complexity cannot be reduced substantially without changing the structure of the trellis. A new detector is proposed which folds up the original state-transition trellis such that the number of states involved is greatly reduced. The performance is close to that of the CBMLSE. The folded trellis detector (FTD) can also be used as a preselection stage for the CBMLSE. The FTD selects with high accuracy the few symbol vectors that are more likely to be transmitted. The CBMLSE is then used to determine the most likely symbol vector out of the small subset of vectors. The performance of this scheme is as good as the CBMLSE. The FTD is also applied in an iterative multiuser receiver that exploits the powerful iterative algorithm of Turbo codes