Modeling DVFS and Power-Gating Actuators for Cycle-Accurate NoC-Based Simulators

Networks-on-chip (NoCs) are a widely recognized viable interconnection paradigm to support the multi-core revolution. One of the major design issues of multicore architectures is still the power, which can no longer be considered mainly due to the cores, since the NoC contribution to the overall energy budget is relevant. To face both static and dynamic power while balancing NoC performance, different actuators have been exploited in literature, mainly dynamic voltage frequency scaling (DVFS) and power gating. Typically, simulation-based tools are employed to explore the huge design space by adopting simplified models of the components. As a consequence, the majority of state-of-the-art on NoC power-performance optimization do not accurately consider timing and power overheads of actuators, or (even worse) do not consider them at all, with the risk of overestimating the benefits of the proposed methodologies. This article presents a simulation framework for power-performance analysis of multicore architectures with specific focus on the NoC. It integrates accurate power gating and DVFS models encompassing also their timing and power overheads. The value added of our proposal is manyfold: (i) DVFS and power gating actuators are modeled starting from SPICE-level simulations; (ii) such models have been integrated in the simulation environment; (iii) policy analysis support is plugged into the framework to enable assessment of different policies; (iv) a flexible GALS (globally asynchronous locally synchronous) support is provided, covering both handshake and FIFO re-synchronization schemas. To demonstrate both the flexibility and extensibility of our proposal, two simple policies exploiting the modeled actuators are discussed in the article

Dynamic Voltage Scaling Techniques for Energy Efficient Synchronized Sensor Network Design

Building energy-efficient systems is one of the principal challenges in wireless sensor networks. Dynamic voltage scaling (DVS), a technique to reduce energy consumption by varying the CPU frequency on the fly, has been widely used in other settings to accomplish this goal. In this paper, we show that changing the CPU frequency can affect timekeeping functionality of some sensor platforms. This phenomenon can cause an unacceptable loss of time synchronization in networks that require tight synchrony over extended periods, thus preventing all existing DVS techniques from being applied. We present a method for reducing energy consumption in sensor networks via DVS, while minimizing the impact of CPU frequency switching on time synchronization. The system is implemented and evaluated on a network of 11 Imote2 sensors mounted on a truss bridge and running a high-fidelity continuous structural health monitoring application. Experimental measurements confirm that the algorithm significantly reduces network energy consumption over the same network that does not use DVS, while requiring significantly fewer re-synchronization actions than a classic DVS algorithm.unpublishedis peer reviewe

Fault-tolerant Algorithms for Tick-Generation in Asynchronous Logic: Robust Pulse Generation

Today's hardware technology presents a new challenge in designing robust systems. Deep submicron VLSI technology introduced transient and permanent faults that were never considered in low-level system designs in the past. Still, robustness of that part of the system is crucial and needs to be guaranteed for any successful product. Distributed systems, on the other hand, have been dealing with similar issues for decades. However, neither the basic abstractions nor the complexity of contemporary fault-tolerant distributed algorithms match the peculiarities of hardware implementations. This paper is intended to be part of an attempt striving to overcome this gap between theory and practice for the clock synchronization problem. Solving this task sufficiently well will allow to build a very robust high-precision clocking system for hardware designs like systems-on-chips in critical applications. As our first building block, we describe and prove correct a novel Byzantine fault-tolerant self-stabilizing pulse synchronization protocol, which can be implemented using standard asynchronous digital logic. Despite the strict limitations introduced by hardware designs, it offers optimal resilience and smaller complexity than all existing protocols.Comment: 52 pages, 7 figures, extended abstract published at SSS 201

An ECG-on-Chip with 535-nW/Channel Integrated Lossless Data Compressor for Wireless Sensors

This paper presents a low-power ECG recording system-on-chip (SoC) with on-chip low-complexity lossless ECG compression for data reduction in wireless/ambulatory ECG sensor devices. The chip uses a linear slope predictor for data compression, and incorporates a novel low-complexity dynamic coding-packaging scheme to frame the prediction error into fixed-length 16-bit format. The proposed technique achieves an average compression ratio of 2.25x on MIT/BIH ECG database. Implemented in a standard 0.35 um process, the compressor uses 0.565K gates/channel occupying 0.4 mm2 for four channels, and consumes 535 nW/channel at 2.4 V for ECG sampled at 512 Hz. Small size and ultra-low power consumption makes the proposed technique suitable for wearable ECG sensor applications

Hardware design of LIF with Latency neuron model with memristive STDP synapses

In this paper, the hardware implementation of a neuromorphic system is presented. This system is composed of a Leaky Integrate-and-Fire with Latency (LIFL) neuron and a Spike-Timing Dependent Plasticity (STDP) synapse. LIFL neuron model allows to encode more information than the common Integrate-and-Fire models, typically considered for neuromorphic implementations. In our system LIFL neuron is implemented using CMOS circuits while memristor is used for the implementation of the STDP synapse. A description of the entire circuit is provided. Finally, the capabilities of the proposed architecture have been evaluated by simulating a motif composed of three neurons and two synapses. The simulation results confirm the validity of the proposed system and its suitability for the design of more complex spiking neural network

Application specific asynchronous microengines for efficient high-level control

technical reportDespite the growing interest in asynchronous circuits programmable asynchronous controllers based on the idea of microprogramming have not been actively pursued Since programmable control is widely used in many commercial ASICs to allow late correction of design errors to easily upgrade product families to meet the time to market and even efficient run time modications to control in adaptive systems we consider it crucial that self timed techniques support efficient programmable control This is especially true given that asynchronous (self-timed) circuits are well suited for realizing reactive and control intensive designs We offer a practical solution to programmable asynchronous control in the form of application-speciffic microprogrammed asynchronous controllers (or microengines). The features of our solution include a modular and easily extensible datapath structure support for two main styles of hand shaking (namely two phase and four phase), and many efficiency measures based on exploiting concurrency between operations and employing efficient circuit structures Our results demonstrate that the proposed microengine can yield high performance-in fact performance close to that offered by automated high level synthesis tools targeting custom hard wired burstmode machines

Application specific asynchronous microgengines for efficient high-level control

technical reportDespite the growing interest in asynchronous circuits, programmable asynchronous controllers based on the idea of microprogramming have not been actively pursued. Since programmable control is widely used in many commercial ASICs to allow late correction of design errors, to easily upgrade product families, to meet the time to market, and even effect run-time modifications to control in adaptive systems, we consider it crucial that self-timed techniques support efficient programmable control. This is especially true given that asynchronous (self-timed) circuits are well suited for realizing reactive and control-intensive designs. We offer a practical solution to programmable asynchronous control in the form of application-specific micro-programmed asynchronous controllers (or microengines). The features of our solution include a modular and easily extensible datapath structure, support for two main styles of handshaking (namely two-phase and four-phase), and many efficiency measures based on exploiting concurrency between operations and employing efficient circuit structures. Our results demonstrate that the proposed microengine can yield high performance?in fact performance close to that offered by automated high-level synthesis tools targeting custom hard-wired burstmode machines

An experimental study of the concatenated Reed-Solomon/Viterbi channel coding system performance and its impact on space communications

The need for efficient space communication at very low bit error probabilities to the specification and implementation of a concatenated coding system using an interleaved Reed-Solomon code as the outer code and a Viterbi-decoded convolutional code as the inner code. Experimental results of this channel coding system are presented under an emulated S-band uplink and X-band downlink two-way space communication channel, where both uplink and downlink have strong carrier power. This work was performed under the NASA End-to-End Data Systems program at JPL. Test results verify that at a bit error probability of 10 to the -6 power or less, this concatenated coding system does provide a coding gain of 2.5 dB or more over the Viterbi-decoded convolutional-only coding system. These tests also show that a desirable interleaving depth for the Reed-Solomon outer code is 8 or more. The impact of this "virtually" error-free space communication link on the transmission of images is discussed and examples of simulation results are given