Accurate Power Analysis for Near-Vt RRAM-based FPGA

Resistive Random Access Memory (RRAM)-based FPGA architectures employ RRAMs not only as memories to store the configuration but embed them in the datapaths of programmable routing resources to propagate signals with improved performances. Sources of power consumption have been intensively studied for conventional Static Random Access Memories (SRAM)-based FPGAs. However, very limited works focused so far on studying the power characteristics of RRAM-based FPGAs. In this paper, we first analyze the power characteristics of RRAM-based multiplexer at circuit level and then use electrical simulations to study power consumption of RRAM-based FPGA architectures. Experimental results show that RRAM-based FPGAs achieve a Power-Delay Product reduced by 50% compared to SRAM-based FPGA at nominal voltage and 20% compared to near-Vt SRAM-based FPGA, respectively

FPGA Energy Efficiency by Leveraging Thermal Margin

Cutting edge FPGAs are not energy efficient as conventionally presumed to be, and therefore, aggressive power-saving techniques have become imperative. The clock rate of an FPGA-mapped design is set based on worst-case conditions to ensure reliable operation under all circumstances. This usually leaves a considerable timing margin that can be exploited to reduce power consumption by scaling voltage without lowering clock frequency. There are hurdles for such opportunistic voltage scaling in FPGAs because (a) critical paths change with designs, making timing evaluation difficult as voltage changes, (b) each FPGA resource has particular power-delay trade-off with voltage, (c) data corruption of configuration cells and memory blocks further hampers voltage scaling. In this paper, we propose a systematical approach to leverage the available thermal headroom of FPGA-mapped designs for power and energy improvement. By comprehensively analyzing the timing and power consumption of FPGA building blocks under varying temperatures and voltages, we propose a thermal-aware voltage scaling flow that effectively utilizes the thermal margin to reduce power consumption without degrading performance. We show the proposed flow can be employed for energy optimization as well, whereby power consumption and delay are compromised to accomplish the tasks with minimum energy. Lastly, we propose a simulation framework to be able to examine the efficiency of the proposed method for other applications that are inherently tolerant to a certain amount of error, granting further power saving opportunity. Experimental results over a set of industrial benchmarks indicate up to 36% power reduction with the same performance, and 66% total energy saving when energy is the optimization target.Comment: Accepted in IEEE International Conference on Computer Design (ICCD) 201

Experimental survey of FPGA-based monolithic switches and a novel queue balancer

This paper studies small to medium-sized monolithic switches for FPGA implementation and presents a novel switch design that achieves high algorithmic performance and FPGA implementation efficiency. Crossbar switches based on virtual output queues (VOQs) and variations have been rather popular for implementing switches on FPGAs, with applications in network switches, memory interconnects, network-on-chip (NoC) routers etc. The implementation efficiency of crossbar-based switches is well-documented on ASICs, though we show that their disadvantages can outweigh their advantages on FPGAs. One of the most important challenges in such input-queued switches is the requirement for iterative scheduling algorithms. In contrast to ASICs, this is more harmful on FPGAs, as the reduced operating frequency and narrower packets cannot “hide” multiple iterations of scheduling that are required to achieve a modest scheduling performance.Our proposed design uses an output-queued switch internally for simplifying scheduling, and a queue balancing technique to avoid queue fragmentation and reduce the need for memory-sharing VOQs. Its implementation approaches the scheduling performance of a state-of-the-art FPGA-based switch, while requiring considerably fewer resources

FPGA-SPICE: A Simulation-based Power Estimation Framework for FPGAs

Mainstream Field Programmable Gate Array (FPGA) power estimation tools are based on probabilistic activity estimation and analytical power models. The power consumption of the programmable resources of FPGAs is highly sensitive to their configurations. Due to their highly flexible nature, the configurations of FPGAs routing multiplexers or Look Up Tables (LUTs) are really different from a design to another but current analytical power models cannot accurately capture the associated power differences. In this paper, we introduce a simulation-based power estimation framework for FPGAs, called FPGA-SPICE, which supports any FPGA architecture that can be described with an architectural description language. Our power estimation engine automatically generates accurate SPICE netlists according to the FPGA configurations and enables precise power analysis of FPGA architectures. SPICE testbenches can be generated at different level of complexity, denoted as full-chip-level, grid-level and component-level testbenches. Full-chip-level testbenches dump the netlists associated with the complete FPGA fabric. To reduce simulation time, FPGA-SPICE can split the full-chip-level testbenches into grid-level testbenches, each of which consisting of a complete logic block netlist, or component-level testbenches, which consider individual circuit elements, i.e., multiplexers, LUTs, flip-flops, etc., separately. We show that the grid/component-level approach can achieve 14 x speed-up with a moderate 14% accuracy loss, compared to the full-chip level. We also use FPGA-SPICE to study the power characteristics of a commercial FPGA architecture at different technology nodes. Experimental results show that the global routing architecture consumes 50% of the total power, the local routing architecture claims for 40% of the total power, and the remaining 10% comes from the LUTs and flip-flops

FPGA-SPICE: A Simulation-Based Architecture Evaluation Framework for FPGAs

In this paper, we developed a simulation-based architecture evaluation framework for field-programmable gate arrays (FPGAs), called FPGA-SPICE, which enables automatic layout-level estimation and electrical simulations of FPGA architectures. FPGA-SPICE can automatically generate Verilog and SPICE netlists based on realistic FPGA configurations and a high-level eTtensible Markup Language-based FPGA architectural description language. The outputted Verilog netlists can be used to generate layouts of full FPGA fabrics through a semicustom design flow. SPICE simulation decks can be generated at three levels of complexity, namely, full-chip-level, grid-level, and component-level, providing different tradeoff between accuracy and simulation time. In order to enable such level of analysis, we presented two SPICE netlist partitioning techniques: loads extraction and parasitic net activity estimation. Electrical simulations showed that averaged over the selected benchmarks, the grid-/component-level approach can achieve 6.1x/7.5x execution speed-up with 9.9%/8.3% accuracy loss, respectively, compared to the full-chip level simulation. FPGA-SPICE was showcased through three different case studies: 1) an area breakdown analysis for static random access memory-based FPGAs, showing that configuration memories are a dominant factor; 2) a power breakdown comparison to analytical models, analyzing the source of accuracy loss; and 3) a robustness evaluation against process corners, studying their impact on energy consumption of full FPGA fabrics

Design Disjunction for Resilient Reconfigurable Hardware

Contemporary reconfigurable hardware devices have the capability to achieve high performance, power efficiency, and adaptability required to meet a wide range of design goals. With scaling challenges facing current complementary metal oxide semiconductor (CMOS), new concepts and methodologies supporting efficient adaptation to handle reliability issues are becoming increasingly prominent. Reconfigurable hardware and their ability to realize self-organization features are expected to play a key role in designing future dependable hardware architectures. However, the exponential increase in density and complexity of current commercial SRAM-based field-programmable gate arrays (FPGAs) has escalated the overhead associated with dynamic runtime design adaptation. Traditionally, static modular redundancy techniques are considered to surmount this limitation; however, they can incur substantial overheads in both area and power requirements. To achieve a better trade-off among performance, area, power, and reliability, this research proposes design-time approaches that enable fine selection of redundancy level based on target reliability goals and autonomous adaptation to runtime demands. To achieve this goal, three studies were conducted: First, a graph and set theoretic approach, named Hypergraph-Cover Diversity (HCD), is introduced as a preemptive design technique to shift the dominant costs of resiliency to design-time. In particular, union-free hypergraphs are exploited to partition the reconfigurable resources pool into highly separable subsets of resources, each of which can be utilized by the same synthesized application netlist. The diverse implementations provide reconfiguration-based resilience throughout the system lifetime while avoiding the significant overheads associated with runtime placement and routing phases. Evaluation on a Motion-JPEG image compression core using a Xilinx 7-series-based FPGA hardware platform has demonstrated the potential of the proposed FT method to achieve 37.5% area saving and up to 66% reduction in power consumption compared to the frequently-used TMR scheme while providing superior fault tolerance. Second, Design Disjunction based on non-adaptive group testing is developed to realize a low-overhead fault tolerant system capable of handling self-testing and self-recovery using runtime partial reconfiguration. Reconfiguration is guided by resource grouping procedures which employ non-linear measurements given by the constructive property of f-disjunctness to extend runtime resilience to a large fault space and realize a favorable range of tradeoffs. Disjunct designs are created using the mosaic convergence algorithm developed such that at least one configuration in the library evades any occurrence of up to d resource faults, where d is lower-bounded by f. Experimental results for a set of MCNC and ISCAS benchmarks have demonstrated f-diagnosability at the individual slice level with average isolation resolution of 96.4% (94.4%) for f=1 (f=2) while incurring an average critical path delay impact of only 1.49% and area cost roughly comparable to conventional 2-MR approaches. Finally, the proposed Design Disjunction method is evaluated as a design-time method to improve timing yield in the presence of large random within-die (WID) process variations for application with a moderately high production capacity

Degradation in FPGAs: Monitoring, Modeling and Mitigation

This dissertation targets the transistor aging degradation as well as the associated thermal challenges in FPGAs (since there is an exponential relation between aging and chip temperature). The main objectives are to perform experimentation, analysis and device-level model abstraction for modeling the degradation in FPGAs, then to monitor the FPGA to keep track of aging rates and ultimately to propose an aging-aware FPGA design flow to mitigate the aging