Realizability of embedded controllers: from hybrid models to correct implementations

Un controller embedded \ue8 un dispositivo (ovvero, un'opportuna combinazione di componenti hardware e software) che, immerso in un ambiente dinamico, deve reagire alle variazioni ambientali in tempo reale. I controller embedded sono largamente adottati in molti contesti della vita moderna, dall'automotive all'avionica, dall'elettronica di consumo alle attrezzature mediche. La correttezza di tali controller \ue8 indubbiamente cruciale. Per la progettazione e per la verifica di un controller embedded, spesso sorge la necessit\ue0 di modellare un intero sistema che includa sia il controller, sia il suo ambiente circostante. La natura di tale sistema \ue8 ibrido. Esso, infatti, \ue8 ottenuto integrando processi ad eventi discreti (i.e., il controller) e processi a tempo continuo (i.e., l'ambiente). Sistemi di questo tipo sono chiamati cyber-physical (CPS) o sistemi ibridi. Le dinamiche di tali sistemi non possono essere rappresentati efficacemente utilizzando o solo un modello (i.e., rappresentazione) discreto o solo un modello continuo. Diversi tipi di modelli possono sono stati proposti per descrivere i sistemi ibridi. Questi si concentrano su obiettivi diversi: modelli dettagliati sono eccellenti per la simulazione del sistema, ma non sono adatti per la sua verifica; modelli meno dettagliati sono eccellenti per la verifica, ma non sono convenienti per i successivi passi di raffinamento richiesti per la progettazione del sistema, e cos\uec via. Tra tutti questi modelli, gli Automi Ibridi (HA) [8, 77] rappresentano il formalismo pi\uf9 efficace per la simulazione e la verifica di sistemi ibridi. In particolare, un automa ibrido rappresenta i processi ad eventi discreti per mezzo di macchine a stati finiti (FSM), mentre i processi a tempo continuo sono rappresentati mediante variabili "continue" la cui dinamica \ue8 specificata da equazioni differenziali ordinarie (ODE) o loro generalizzazioni (e.g., inclusioni differenziali). Sfortunatamente, a causa della loro particolare semantica, esistono diverse difficolt\ue0 nel raffinare un modello basato su automi ibridi in un modello realizzabile e, di conseguenza, esistono difficolt\ue0 nell'automatizzare il flusso di progettazione di sistemi ibridi a partire da automi ibridi. Gli automi ibridi, infatti, sono considerati dispositivi "perfetti e istantanei". Essi adottano una nozione di tempo e di variabili basata su insiemi "densi" (i.e., l'insieme dei numeri reali). Pertanto, gli automi ibridi possono valutare lo stato (i.e., i valori delle variabili) del sistema in ogni istante, ovvero in ogni infinitesimo di tempo, e con la massima precisione. Inoltre, sono in grado di eseguire computazioni o reagire ad eventi di sincronizzazione in modo istantaneo, andando a cambiare la modalit\ue0 di funzionamento del sistema senza alcun ritardo. Questi aspetti sono convenienti a livello di modellazione, ma nessun dispositivo hardware/software potrebbe implementare correttamente tali comportamenti, indipendentemente dalle sue prestazioni. In altre parole, il controller modellato potrebbe non essere implementabile, ovvero, esso potrebbe non essere realizzabile affatto. Questa tesi affronta questo problema proponendo una metodologia completa e gli strumenti necessari per derivare da modelli basati su automi ibridi, modelli realizzabili e le corrispondenti implementazioni corrette. In un modello realizzabile, il controller analizza lo stato del sistema ad istanti temporali discreti, tipicamente fissati dalla frequenza di clock del processore installato sul dispositivo che implementa il controller. Lo stato del sistema \ue8 dato dai valori delle variabili rilevati dai sensori. Questi valori vengono digitalizzati con precisione finita e propagati al controller che li elabora per decidere se cambiare la modalit\ue0 di funzionamento del sistema. In tal caso, il controller genera segnali che, una volta trasmessi agli attuatori, determineranno il cambiamento della modalit\ue0 di funzionamento del sistema. \uc8 necessario tener presente che i sensori e gli attuatori introducono ritardi che seppur limitati, non possono essere trascurati.An embedded controller is a reactive device (e.g., a suitable combination of hardware and software components) that is embedded in a dynamical environment and has to react to environment changes in real time. Embedded controllers are widely adopted in many contexts of modern life, from automotive to avionics, from consumer electronics to medical equipment. Noticeably, the correctness of such controllers is crucial. When designing and verifying an embedded controller, often the need arises to model the controller and also its surrounding environment. The nature of the obtained system is hybrid because of the inclusion of both discrete-event (i.e., controller) and continuous-time (i.e., environment) processes whose dynamics cannot be characterized faithfully using either a discrete or continuous model only. Systems of this kind are named cyber-physical (CPS) or hybrid systems. Different types of models may be used to describe hybrid systems and they focus on different objectives: detailed models are excellent for simulation but not suitable for verification, high-level models are excellent for verification but not convenient for refinement, and so forth. Among all these models, hybrid automata (HA) [8, 77] have been proposed as a powerful formalism for the design, simulation and verification of hybrid systems. In particular, a hybrid automaton represents discrete-event processes by means of finite state machines (FSM), whereas continuous-time processes are represented by using real-numbered variables whose dynamics is specified by (ordinary) differential equation (ODE) or their generalizations (e.g., differential inclusions). Unfortunately, when the high-level model of the hybrid system is a hybrid automaton, several difficulties should be solved in order to automate the refinement phase in the design flow, because of the classical semantics of hybrid automata. In fact, hybrid automata can be considered perfect and instantaneous devices. They adopt a notion of time and evaluation of continuous variables based on dense sets of values (usually R, i.e., Reals). Thus, they can sample the state (i.e., value assignments on variables) of the hybrid system at any instant in such a dense set R 650. Further, they are capable of instantaneously evaluating guard constraints or reacting to incoming events by performing changes in the operating mode of the hybrid system without any delay. While these aspects are convenient at the modeling level, any model of an embedded controller that relies for its correctness on such precision and instantaneity cannot be implemented by any hardware/software device, no matter how fast it is. In other words, the controller is un-realizable, i.e., un-implementable. This thesis proposes a complete methodology and a framework that allows to derive from hybrid automata proved correct in the hybrid domain, correct realizable models of embedded controllers and the related discrete implementations. In a realizable model, the controller samples the state of the environment at periodic discrete time instants which, typically, are fixed by the clock frequency of the processor implementing the controller. The state of the environment consists of the current values of the relevant variables as observed by the sensors. These values are digitized with finite precision and reported to the controller that may decide to switch the operating mode of the environment. In such a case, the controller generates suitable output signals that, once transmitted to the actuators, will effect the desired change in the operating mode. It is worth noting that the sensors will report the current values of the variables and the actuators will effect changes in the rates of evolution of the variables with bounded delays

Detection of Feature Interactions in Automotive Active Safety Features

With the introduction of software into cars, many functions are now realized with reduced cost, weight and energy. The development of these software systems is done in a distributed manner independently by suppliers, following the traditional approach of the automotive industry, while the car maker takes care of the integration. However, the integration can lead to unexpected and unintended interactions among software systems, a phenomena regarded as feature interaction. This dissertation addresses the problem of the automatic detection of feature interactions for automotive active safety features. Active safety features control the vehicle's motion control systems independently from the driver's request, with the intention of increasing passengers' safety (e.g., by applying hard braking in the case of an identified imminent collision), but their unintended interactions could instead endanger the passengers (e.g., simultaneous throttle increase and sharp narrow steering, causing the vehicle to roll over). My method decomposes the problem into three parts: (I) creation of a definition of feature interactions based on the set of actuators and domain expert knowledge; (II) translation of automotive active safety features designed using a subset of Matlab's Stateflow into the input language of the model checker SMV; (III) analysis using model checking at design time to detect a representation of all feature interactions based on partitioning the counterexamples into equivalence classes. The key novel characteristic of my work is exploiting domain-specific information about the feature interaction problem and the structure of the model to produce a method that finds a representation of all different feature interactions for automotive active safety features at design time. My method is validated by a case study with the set of non-proprietary automotive feature design models I created. The method generates a set of counterexamples that represent the whole set of feature interactions in the case study.By showing only a set of representative feature interaction cases, the information is concise and useful for feature designers. Moreover, by generating these results from feature models designed in Matlab's Stateflow translated into SMV models, the feature designers can trace the counterexamples generated by SMV and understand the results in terms of the Stateflow model. I believe that my results and techniques will have relevance to the solution of the feature interaction problem in other cyber-physical systems, and have a direct impact in assessing the safety of automotive systems

Semi-Formal Functional Verification by EFSM traversing via NuSMV

Simulation-based verification of hardware systems is well-established in industrial practice thanks to the ease-ofuse of the approach and to its scalability. However, it notoriously suffers from the lack of exhaustiveness. On the other hand, while pure formal verification techniques provide high confidence in the design correctness, they are very limited in terms of scalability. As an alternative, semi-formal validation techniques are currently under investigation. Semi-formal approaches fulfil the tradeoff between high-coverage results, scalability of the design, and reduced resource requirements. In this work, a semi-formal approach for hardware verification is presented by exploiting constrained random simulation and extended finite state machine (EFSM) traversal through heuristics. The proposed heuristics aim to uniformly, and rapidly, visit the design space, exploiting a NuSMV-based constraint solving technique to efficiently cover corner cases. In this context, a constraint solving interface has been built on top of the NuSMV model checker. We present experimental results comparing the proposed heuristics with existent approaches, and the effectiveness of our NuSMV-based strategy with respect to the adoption of a state of the art constraint solver (ECLiPSe)

Model Checking and Model-Based Testing : Improving Their Feasibility by Lazy Techniques, Parallelization, and Other Optimizations

This thesis focuses on the lightweight formal method of model-based testing for checking safety properties, and derives a new and more feasible approach. For liveness properties, dynamic testing is impossible, so feasibility is increased by specializing on an important class of properties, livelock freedom, and deriving a more feasible model checking algorithm for it. All mentioned improvements are substantiated by experiments

Combining SOA and BPM Technologies for Cross-System Process Automation

This paper summarizes the results of an industry case study that introduced a cross-system business process automation solution based on a combination of SOA and BPM standard technologies (i.e., BPMN, BPEL, WSDL). Besides discussing major weaknesses of the existing, custom-built, solution and comparing them against experiences with the developed prototype, the paper presents a course of action for transforming the current solution into the proposed solution. This includes a general approach, consisting of four distinct steps, as well as specific action items that are to be performed for every step. The discussion also covers language and tool support and challenges arising from the transformation