A CASE-BASED REASONING SYSTEM FOR THE DIAGNOSIS OF INDIVIDUAL SENSITIVITY TO STRESS IN PSYCHOPHYSIOLOGY

Abstract Stress is an increasing problem in our present world. Especially negative stress could cause serious health problems if it remains undiagnosed/misdiagnosed and untreated. In stress medicine, clinicians' measure blood pressure, ECG, finger temperature and breathing rate during a number of exercises to diagnose stressrelated disorders. One of the physiological parameters for quantifying stress levels is the finger temperature measurement which helps the clinicians in diagnosis and treatment of stress. However, in practice, it is difficult and tedious for a clinician to understand, interpret and analyze complex, lengthy sequential sensor signals. There are only few experts who are able to diagnose and predict stress-related problems. A system that can help the clinician in diagnosing stress is important, but the large individual variations make it difficult to build such a system. This research work has investigated several artificial Intelligence techniques for the purpose of developing an intelligent, integrated sensor system for establishing diagnosis and treatment plan in the psychophysiological domain. To diagnose individual sensitivity to stress, case-based reasoning is applied as a core technique to facilitate experience reuse by retrieving previous similar cases. Furthermore, fuzzy techniques are also employed and incorporated into the case-based reasoning system to handle vagueness, uncertainty inherently existing in clinicians reasoning process. The validation of the approach is based on close collaboration with experts and measurements from twenty four persons used as reference. 39 time series from these 24 persons have been used to evaluate the approach (in terms of the matching algorithms) and an expert has ranked and estimated the similarity. The result shows that the system reaches a level of performance close to an expert. The proposed system could be used as an expert for a less experienced clinician or as a second option for an experienced clinician to their decision making process in stress diagnosis. Sammanfattning Den ökande stressnivån i vårt samhälle med allt högre krav och högt tempo har ett högt pris. Stressrelaterade problem och sjukdom är en stor samhällskostnad och speciellt om negativ stress förblir oupptäckt, eller ej korrekt identifierad/diagnostiserad och obehandlad under en längre tid kan den få alvarliga hälsoeffekter för individen vilket kan leda till långvarig sjukskrivning. Inom stressmedicinen mäter kliniker blodtryck, EKG, fingertemperatur och andning under olika situationer för att diagnostisera stress. Stressdiagnos baserat fingertemperaturen (FT) är något som en skicklig klinker kan utföra vilket stämmer med forskningen inom klinisk psykofysiologi. Emellertid i praktiken är det mycket svårt, och mödosamt för att en kliniker att i detalj följa och analysera långa serier av mätvärden och det finns endast mycket få experter som är kompetent att diagnostisera och/eller förutsäga stressproblem. Därför är ett system, som kan hjälpa kliniker i diagnostisering av stress, viktig. Men de stora individvariationerna och bristen av precisa diagnosregler gör det svårt att använda ett datorbaserat system. Detta forskningsarbete har tittat på flera tekniker och metoder inom artificiell intelligens för att hitta en väg fram till ett intelligent sensorbaserat system för diagnos och utformning av behandlingsplaner inom stressområdet. För att diagnostisera individuell stress har fallbaserat resonerande visat sig framgångsrikt, en teknik som gör det möjligt att återanvända erfarenhet, förklara beslut, genom att hämta tidigare liknande fingertemperaturprofilerar. Vidare används "fuzzy logic", luddig logik så att systemet kan hantera de inneboende vagheter i domänen. Metoder och algoritmer har utvecklats för detta. Valideringen av ansatsen baseras på nära samarbete med experter och mätningar från tjugofyra användare. Trettionio tidserier från dessa 24 personer har varit basen för utvärderingen av ansatsen, och en erfaren kliniker har klassificerat alla fall och systemet har visat sig producera resultat nära en expert. Det föreslagna systemet kan användas som ett referens för en mindre erfaren kliniker eller som ett "second opinion" för en erfaren kliniker i deras beslutsprocess. Dessutom har finger temperatur visat sig passa bra för användning i hemmet vid träning eller kontroll vilket blir möjligt med ett datorbaserat stressklassificeringssystem på exempelvis en PC med en USB fingertemperaturmätare. vii Acknowledgemen

Applying AI tools to operational space environmental analysis

The U.S. Air Force and National Oceanic Atmospheric Agency (NOAA) space environmental operations centers are facing increasingly complex challenges meeting the needs of their growing user community. These centers provide current space environmental information and short term forecasts of geomagnetic activity. Recent advances in modeling and data access have provided sophisticated tools for making accurate and timely forecasts, but have introduced new problems associated with handling and analyzing large quantities of complex data. AI (Artificial Intelligence) techniques have been considered as potential solutions to some of these problems. Fielding AI systems has proven more difficult than expected, in part because of operational constraints. Using systems which have been demonstrated successfully in the operational environment will provide a basis for a useful data fusion and analysis capability. Our approach uses a general purpose AI system already in operational use within the military intelligence community, called the Temporal Analysis System (TAS). TAS is an operational suite of tools supporting data processing, data visualization, historical analysis, situation assessment and predictive analysis. TAS includes expert system tools to analyze incoming events for indications of particular situations and predicts future activity. The expert system operates on a knowledge base of temporal patterns encoded using a knowledge representation called Temporal Transition Models (TTM's) and an event database maintained by the other TAS tools. The system also includes a robust knowledge acquisition and maintenance tool for creating TTM's using a graphical specification language. The ability to manipulate TTM's in a graphical format gives non-computer specialists an intuitive way of accessing and editing the knowledge base. To support space environmental analyses, we used TAS's ability to define domain specific event analysis abstractions. The prototype system defines events covering reports of natural phenomena such as solar flares, bursts, geomagnetic storms, and five others pertinent to space environmental analysis. With our preliminary event definitions we experimented with TAS's support for temporal pattern analysis using X-ray flare and geomagnetic storm forecasts as case studies. We are currently working on a framework for integrating advanced graphics and space environmental models into this analytical environment

Integrating case based reasoning and geographic information systems in a planing support system: Çeşme Peninsula study

Thesis (Doctoral)--Izmir Institute of Technology, City and Regional Planning, Izmir, 2009Includes bibliographical references (leaves: 110-121)Text in English; Abstract: Turkish and Englishxii, 140 leavesUrban and regional planning is experiencing fundamental changes on the use of of computer-based models in planning practice and education. However, with this increased use, .Geographic Information Systems. (GIS) or .Computer Aided Design.(CAD) alone cannot serve all of the needs of planning. Computational approaches should be modified to deal better with the imperatives of contemporary planning by using artificial intelligence techniques in city planning process.The main aim of this study is to develop an integrated .Planning Support System. (PSS) tool for supporting the planning process. In this research, .Case Based Reasoning. (CBR) .an artificial intelligence technique- and .Geographic Information Systems. (GIS) .geographic analysis, data management and visualization techniqueare used as a major PSS tools to build a .Case Based System. (CBS) for knowledge representation on an operational study. Other targets of the research are to discuss the benefits of CBR method in city planning domain and to demonstrate the feasibility and usefulness of this technique in a PSS. .Çeşme Peninsula. case study which applied under the desired methodology is presented as an experimental and operational stage of the thesis.This dissertation tried to find out whether an integrated model which employing CBR&GIS could support human decision making in a city planning task. While the CBS model met many of predefined goals of the thesis, both advantages and limitations have been realized from findings when applied to the complex domain such as city planning

An integration of case-based and model-based reasoning and its application to physical system faults

Case-Based Reasoning (CBR) systems solve new problems by finding stored instances of problems similar to the current one, and by adapting previous solutions to fit the current problem, taking into consideration any differences between the current and previous situations. CBR has been proposed as a more robust and plausible model of expert reasoning than the better-known rule-based systems.;Current CBR systems have been used in planning, engineering design, and memory organization. There has been minimal work, however, in the area of reasoning about physical systems. This type of reasoning is a difficult task, and every attempt to automate the process must overcome the problems of modeling normal behavior, diagnosing faults, and predicting future behavior.;CBR systems are currently quite difficult to compare and evaluate, because there is currently no common mathematical framework in which the systems can be described. The only avenue available at present for comparison and evaluation of CBR systems requires an intellectual synthesis of the semantics of the program sources. Important constraints on the operation of a CBR system are often hidden in obscure programming tricks in the system\u27s source code.;This thesis presents a hybrid methodology for reasoning about physical systems in operation. This methodology is based on retrieval and adaptation of previously experienced problems similar to the problem at hand. In this methodology the ability of a CBR to reason about a physical system is significantly enhanced by the addition to the Case-Based Reasoner of a model of the physical system. The model describes the physical system\u27s structural, functional, and causal behavior.;Additionally, this thesis presents a mathematical formalization of the case-based reasoning paradigm and a formal specification of the interaction of the CBR component with the model-based component of a case-based system. to prove the feasibility and the merit of such methodology, a prototypical system for dealing with the faults of a physical system has been designed and implemented. Through testing has been proved that this hybrid methodology allows the generation of diagnoses and prognoses that are beyond the capabilities of current reasoning systems

Information Systems and Healthcare XXXIV: Clinical Knowledge Management Systems—Literature Review and Research Issues for Information Systems

Knowledge Management (KM) has emerged as a possible solution to many of the challenges facing U.S. and international healthcare systems. These challenges include concerns regarding the safety and quality of patient care, critical inefficiency, disparate technologies and information standards, rapidly rising costs and clinical information overload. In this paper, we focus on clinical knowledge management systems (CKMS) research. The objectives of the paper are to evaluate the current state of knowledge management systems diffusion in the clinical setting, assess the present status and focus of CKMS research efforts, and identify research gaps and opportunities for future work across the medical informatics and information systems disciplines. The study analyzes the literature along two dimensions: (1) the knowledge management processes of creation, capture, transfer, and application, and (2) the clinical processes of diagnosis, treatment, monitoring and prognosis. The study reveals that the vast majority of CKMS research has been conducted by the medical and health informatics communities. Information systems (IS) researchers have played a limited role in past CKMS research. Overall, the results indicate that there is considerable potential for IS researchers to contribute their expertise to the improvement of clinical process through technology-based KM approaches

Organization based multiagent architecture for distributed environments

[EN]Distributed environments represent a complex field in which applied solutions should be flexible and include significant adaptation capabilities. These environments are related to problems where multiple users and devices may interact, and where simple and local solutions could possibly generate good results, but may not be effective with regards to use and interaction. There are many techniques that can be employed to face this kind of problems, from CORBA to multi-agent systems, passing by web-services and SOA, among others. All those methodologies have their advantages and disadvantages that are properly analyzed in this documents, to finally explain the new architecture presented as a solution for distributed environment problems. The new architecture for solving complex solutions in distributed environments presented here is called OBaMADE: Organization Based Multiagent Architecture for Distributed Environments. It is a multiagent architecture based on the organizations of agents paradigm, where the agents in the architecture are structured into organizations to improve their organizational capabilities. The reasoning power of the architecture is based on the Case-Based Reasoning methology, being implemented in a internal organization that uses agents to create services to solve the external request made by the users. The OBaMADE architecture has been successfully applied to two different case studies where its prediction capabilities have been properly checked. Those case studies have showed optimistic results and, being complex systems, have demonstrated the abstraction and generalizations capabilities of the architecture. Nevertheless OBaMADE is intended to be able to solve much other kind of problems in distributed environments scenarios. It should be applied to other varieties of situations and to other knowledge fields to fully develop its potencial.[ES]Los entornos distribuidos representan un campo de conocimiento complejo en el que las soluciones a aplicar deben ser flexibles y deben contar con gran capacidad de adaptación. Este tipo de entornos está normalmente relacionado con problemas donde varios usuarios y dispositivos entran en juego. Para solucionar dichos problemas, pueden utilizarse sistemas locales que, aunque ofrezcan buenos resultados en términos de calidad de los mismos, no son tan efectivos en cuanto a la interacción y posibilidades de uso. Existen múltiples técnicas que pueden ser empleadas para resolver este tipo de problemas, desde CORBA a sistemas multiagente, pasando por servicios web y SOA, entre otros. Todas estas mitologías tienen sus ventajas e inconvenientes, que se analizan en este documento, para explicar, finalmente, la nueva arquitectura presentada como una solución para los problemas generados en entornos distribuidos. La nueva arquitectura aquí se llama OBaMADE, que es el acrónimo del inglés Organization Based Multiagent Architecture for Distributed Environments (Arquitectura Multiagente Basada en Organizaciones para Entornos Distribuidos). Se trata de una arquitectura multiagente basasa en el paradigma de las organizaciones de agente, donde los agentes que forman parte de la arquitectura se estructuran en organizaciones para mejorar sus capacidades organizativas. La capacidad de razonamiento de la arquitectura está basada en la metodología de razonamiento basado en casos, que se ha implementado en una de las organizaciones internas de la arquitectura por medio de agentes que crean servicios que responden a las solicitudes externas de los usuarios. La arquitectura OBaMADE se ha aplicado de forma exitosa a dos casos de estudio diferentes, en los que se han demostrado sus capacidades predictivas. Aplicando OBaMADE a estos casos de estudio se han obtenido resultados esperanzadores y, al ser sistemas complejos, se han demostrado las capacidades tanto de abstracción como de generalización de la arquitectura presentada. Sin embargo, esta arquitectura está diseñada para poder ser aplicada a más tipo de problemas de entornos distribuidos. Debe ser aplicada a más variadas situaciones y a otros campos de conocimiento para desarrollar completamente el potencial de esta arquitectura

Working Notes from the 1992 AAAI Spring Symposium on Practical Approaches to Scheduling and Planning

The symposium presented issues involved in the development of scheduling systems that can deal with resource and time limitations. To qualify, a system must be implemented and tested to some degree on non-trivial problems (ideally, on real-world problems). However, a system need not be fully deployed to qualify. Systems that schedule actions in terms of metric time constraints typically represent and reason about an external numeric clock or calendar and can be contrasted with those systems that represent time purely symbolically. The following topics are discussed: integrating planning and scheduling; integrating symbolic goals and numerical utilities; managing uncertainty; incremental rescheduling; managing limited computation time; anytime scheduling and planning algorithms, systems; dependency analysis and schedule reuse; management of schedule and plan execution; and incorporation of discrete event techniques

BilVideo: Design and implementation of a video database management system

With the advances in information technology, the amount of multimedia data captured, produced, and stored is increasing rapidly. As a consequence, multimedia content is widely used for many applications in today's world, and hence, a need for organizing this data, and accessing it from repositories with vast amount of information has been a driving stimulus both commercially and academically. In compliance with this inevitable trend, first image and especially later video database management systems have attracted a great deal of attention, since traditional database systems are designed to deal with alphanumeric information only, thereby not being suitable for multimedia data. In this paper, a prototype video database management system, which we call BilVideo, is introduced. The system architecture of BilVideo is original in that it provides full support for spatio-temporal queries that contain any combination of spatial, temporal, object-appearance, external-predicate, trajectory-projection, and similarity-based object-trajectory conditions by a rule-based system built on a knowledge-base, while utilizing an object-relational database to respond to semantic (keyword, event/activity, and category-based), color, shape, and texture queries. The parts of BilVideo (Fact-Extractor, Video-Annotator, its Web-based visual query interface, and its SQL-like textual query language) are presented, as well. Moreover, our query processing strategy is also briefly explained. © 2005 Springer Science + Business Media, Inc