Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Full Duplex Component-Forward Cooperative Communication for a Secure Wireless Communication System

The technological breakthrough in the form of Internet of Things (IoT), Big data and connected world is increasing the demand of better spectrum utilization. Half-Duplex (HD) transmission is mostly used in the earlier communication systems. The high transmission demand requires the better utilization of the existing spectrum. There are several possible ways to overcome the problem of better spectrum usage. In-Band Full Duplex (IBFD) is one of the techniques that can double the Spectral Efficiency (SE) in a Beyond 5G (B5G) communication system. In this paper, our aim is to use the spectral efficient IBFD scheme to improve the security of the system with minimum interference. The interference can be reduced by the addition of orthogonality between the transmitted and received signal of a relay. A component-forward scheme is proposed in this paper to create such orthogonality. For achieving the desired aim, IBFD is used with Device-to-Device (D2D), Artificial Noise (AN), Modulation based orthogonalization, Radio Frequency Energy Harvesting (RFEH) and proposed Full-Duplex Component Forward (FD-CF) algorithm for multiple relays. We also use non-linear harvested power as one of the sources to reuse the exiting power for evaluating the system performance. The derivation of Secrecy Outage Probability (SOP) and throughput is derived in this paper for the FD-CF cooperative communication and is explored with and without non-linear RFEH. The simulation results show the comparison between the component-forward and decode-and-forward communication with one or more relays

Security Improvement for Energy Harvesting based Overlay Cognitive Networks with Jamming-Assisted Full-Duplex Destinations

This work investigates the secrecy capability of energy harvesting based overlay cognitive networks (EHOCNs). To this end, we assume that a message by a licensed transmitter is relayed by an unlicensed sender. Critically, the unlicensed sender uses energy harvested from licensed signals, enhancing the overall energy efficiency and maintaining the integrity of licensed communications. To secure messages broadcast by the unlicensed sender against the wire-tapper, full-duplex destinations - unlicensed recipient and licensed receiver - jam the eavesdropper at the same time they receive signals from the unlicensed sender. To this effect, we derive closed-form formulas for the secrecy outage probability, which then quantify the security performance of both unlicensed and licensed communications for EHOCNs with jamming-assisted full-duplex destinations, namely EHOCNwFD. In addition, optimum operating parameters are established, which can serve as essential design guidelines of such systems.acceptedVersionPeer reviewe

Simultaneous wireless information and power transfer in full-duplex communication systems

As wireless devices are mostly constrained by their inability to operate independently infinitely away from centralised power sources, radio frequency (RF) energy harvesting (EH) has been identified as a promising technique for future wireless devices. For this reason, this thesis introduces a novelty in RF EH full-duplex (FD) wireless communication systems. Specifically, this thesis investigate the potentials of simultaneous wireless information and power transfer (SWIPT) in FD communication systems. This thesis firstly focuses on optimal transmit strategies, rate maximization and power minimizing approach for SWIPT in FD systems. Using the rate-split method, difference of convex programming, semi-definite programming technique and one-dimensional search, we reformulate complex optimization problems to yield problem formulations that can be efficiently solved, thus we develop rate maximization algorithm for SWIPT in a point-to-point FD system, SWIPT in FD multiple-input multiple-output (MIMO) two-way relay system and power minimization approach for SWIPT in a multiuser MIMO FD system. This thesis also presents research work carried out with the aim of maximising the secrecy sum-rate for SWIPT in FD systems. In this context, we employ the use of an amplify and forward (AF) relay to inject artificial noise (AN) in order to confuse the eavesdropper. Thus, we address the optimal joint design of the beamforming matrix and AN covariance matrix at the relay, and the transmit power at the sources. Comprehensively, we present extensive theoretical and computer simulations to corroborate the need for joint optimization

Full duplex component-forward cooperative communication for a secure wireless communication system

The technological breakthrough in the form of Internet of Things (IoT), Big data and connected world is increasing the demand of better spectrum utilization. Half-Duplex (HD) transmission is mostly used in the earlier communication systems. The high transmission demand requires the better utilization of the existing spectrum. There are several possible ways to overcome the problem of better spectrum usage. In-Band Full Duplex (IBFD) is one of the techniques that can double the Spectral Efficiency (SE) in a Beyond 5G (B5G) communication system. In this paper, our aim is to use the spectral efficient IBFD scheme to improve the security of the system with minimum interference. The interference can be reduced by the addition of orthogonality between the transmitted and received signal of a relay. A component-forward scheme is proposed in this paper to create such orthogonality. For achieving the desired aim, IBFD is used with Device-to-Device (D2D), Artificial Noise (AN), Modulation based orthogonalization, Radio Frequency Energy Harvesting (RFEH) and proposed Full-Duplex Component Forward (FD-CF) algorithm for multiple relays. We also use non-linear harvested power as one of the sources to reuse the exiting power for evaluating the system performance. The derivation of Secrecy Outage Probability (SOP) and throughput is derived in this paper for the FD-CF cooperative communication and is explored with and without non-linear RFEH. The simulation results show the comparison between the component-forward and decode-and-forward communication with one or more relays

On secure system performance over SISO, MISO and MIMO-NOMA wireless networks equipped a multiple antenna based on TAS protocol

This study examined how to improve system performance by equipping multiple antennae at a base station (BS) and all terminal users/mobile devices instead of a single antenna as in previous studies. Experimental investigations based on three NOMA down-link models involved (1) a single-input-single-output (SISO) scenario in which a single antenna was equipped at a BS and for all users, (2) a multi-input-single-output (MISO) scenario in which multiple transmitter antennae were equipped at a BS and a single receiver antenna for all users and (3) a multi-input-multi-output (MIMO) scenario in which multiple transmitter antennae were equipped at a BS and multiple receiver antenna for all users. This study investigated and compared the outage probability (OP) and system throughput assuming all users were over Rayleigh fading channels. The individual scenarios also each had an eavesdropper. Secure system performance of the individual scenarios was therefore also investigated. In order to detect data from superimposed signals, successive interference cancellation (SIC) was deployed for users, taking into account perfect, imperfect and fully imperfect SICs. The results of analysis of users in these three scenarios were obtained in an approximate closed form by using the Gaussian-Chebyshev quadrature method. However, the clearly and accurately presented results obtained using Monte Carlo simulations prove and verify that the MIMO-NOMA scenario equipped with multiple antennae significantly improved system performance.Web of Science20201art. no. 1