Global scheduling on temperature-constrained multiprocessor real-time systems

In this thesis, we study temperature-constrained multiprocessor real-time systems, where real-time guarantees must be met without exceeding safe temperature levels within the processors. We focus on Pfair scheduling algorithms, especially ERfair scheduling scheme (a work-conserving extension to Pfair scheduling) as our main multiprocessor real-time scheduling methodology. Then, we study the benefits of simple reactive speed scaling as described in the real-time multiprocessor systems. In this thesis, in support of the temperature-awareness, we extend the applicability of the reactive speed scaling to global scheduling schemes for multiprocessors. We propose temperature-aware scheduling and processor selection schemes motivated by existing (thermally non-optimal) ERfair scheduling in order to reduce thermal stress and therefore increase the processor utilization. Then, we show that the proposed algorithm and reactive scheme can enhance the processor utilization compared with any constant speed scheme on real-time multiprocessor systems. Additionally, we show how the maximum schedulable utilization (MSU) for partitioning heuristics can be determined on the temperature-constrained multiprocessor real-time systems

Formalizing a Procedure for Generating Uncertain Resource Availability Assumptions Based on Real Time Logistic Data Capturing with Auto-ID Systems for Reactive Scheduling

As one result of the project "Reactive Construction Project Scheduling using Real Time Construction Logistic Data and Simulation", a procedure for using data about uncertain resource availability assumptions in reactive scheduling processes has been developed. Prediction data about resource availability is generated in a formalized way using real-time monitoring data e.g. from auto-ID systems on the construction site and in the supply chains. The paper focuses on the formalization of the procedure for monitoring construction logistic processes, for the detection of disturbance and for generating of new and uncertain scheduling assumptions for the reactive resource constrained simulation procedure that is and will be further described in other papers

Formalizing a Procedure for Generating Uncertain Resource Availability Assumptions Based on Real Time Logistic Data Capturing with Auto-ID Systems for Reactive Scheduling

As one result of the project "Reactive Construction Project Scheduling using Real Time Construction Logistic Data and Simulation", a procedure for using data about uncertain resource availability assumptions in reactive scheduling processes has been developed. Prediction data about resource availability is generated in a formalized way using real-time monitoring data e.g. from auto-ID systems on the construction site and in the supply chains. The paper focuses on the formalization of the procedure for monitoring construction logistic processes, for the detection of disturbance and for generating of new and uncertain scheduling assumptions for the reactive resource constrained simulation procedure that is and will be further described in other papers

Formalizing a Procedure for Generating Uncertain Resource Availability Assumptions Based on Real Time Logistic Data Capturing with Auto-ID Systems for Reactive Scheduling

As one result of the project "Reactive Construction Project Scheduling using Real Time Construction Logistic Data and Simulation", a procedure for using data about uncertain resource availability assumptions in reactive scheduling processes has been developed. Prediction data about resource availability is generated in a formalized way using real-time monitoring data e.g. from auto-ID systems on the construction site and in the supply chains. The paper focuses on the formalization of the procedure for monitoring construction logistic processes, for the detection of disturbance and for generating of new and uncertain scheduling assumptions for the reactive resource constrained simulation procedure that is and will be further described in other papers

Formalizing a Procedure for Generating Uncertain Resource Availability Assumptions Based on Real Time Logistic Data Capturing with Auto-ID Systems for Reactive Scheduling

As one result of the project "Reactive Construction Project Scheduling using Real Time Construction Logistic Data and Simulation", a procedure for using data about uncertain resource availability assumptions in reactive scheduling processes has been developed. Prediction data about resource availability is generated in a formalized way using real-time monitoring data e.g. from auto-ID systems on the construction site and in the supply chains. The paper focuses on the formalization of the procedure for monitoring construction logistic processes, for the detection of disturbance and for generating of new and uncertain scheduling assumptions for the reactive resource constrained simulation procedure that is and will be further described in other papers

Schedulability, Response Time Analysis and New Models of P-FRP Systems

Functional Reactive Programming (FRP) is a declarative approach for modeling and building reactive systems. FRP has been shown to be an expressive formalism for building applications of computer graphics, computer vision, robotics, etc. Priority-based FRP (P-FRP) is a formalism that allows preemption of executing programs and guarantees real-time response. Since functional programs cannot maintain state and mutable data, changes made by programs that are preempted have to be rolled back. Hence in P-FRP, a higher priority task can preempt the execution of a lower priority task, but the preempted lower priority task will have to restart after the higher priority task has completed execution. This execution paradigm is called Abort-and-Restart (AR). Current real-time research is focused on preemptive of non-preemptive models of execution and several state-of-the-art methods have been developed to analyze the real-time guarantees of these models. Unfortunately, due to its transactional nature where preempted tasks are aborted and have to restart, the execution semantics of P-FRP does not fit into the standard definitions of preemptive or non-preemptive execution, and the research on the standard preemptive and non-preemptive may not applicable for the P-FRP AR model. Out of many research areas that P-FRP may demands, we focus on task scheduling which includes task and system modeling, priority assignment, schedulability analysis, response time analysis, improved P-FRP AR models, algorithms and corresponding software. In this work, we review existing results on P-FRP task scheduling and then present our research contributions: (1) a tighter feasibility test interval regarding the task release offsets as well as a linked list based algorithm and implementation for scheduling simulation; (2) P-FRP with software transactional memory-lazy conflict detection (STM-LCD); (3) a non-work-conserving scheduling model called Deferred Start; (4) a multi-mode P-FRP task model; (5) SimSo-PFRP, the P-FRP extension of SimSo - a SimPy-based, highly extensible and user friendly task generator and task scheduling simulator.Computer Science, Department o

Dynamics analysis and integrated design of real-time control systems

Real-time control systems are widely deployed in many applications. Theory and practice for the design and deployment of real-time control systems have evolved significantly. From the design perspective, control strategy development has been the focus of the research in the control community. In order to develop good control strategies, process modelling and analysis have been investigated for decades, and stability analysis and model-based control have been heavily studied in the literature. From the implementation perspective, real-time control systems require timeliness and predictable timing behaviour in addition to logical correctness, and a real-time control system may behave very differently with different software implementations of the control strategies on a digital controller, which typically has limited computing resources. Most current research activities on software implementations concentrate on various scheduling methodologies to ensure the schedulability of multiple control tasks in constrained environments. Recently, more and more real-time control systems are implemented over data networks, leading to increasing interest worldwide in the design and implementation of networked control systems (NCS). Major research activities in NCS include control-oriented and scheduling-oriented investigations. In spite of significant progress in the research and development of real-time control systems, major difficulties exist in the state of the art. A key issue is the lack of integrated design for control development and its software implementation. For control design, the model-based control technique, the current focus of control research, does not work when a good process model is not available or is too complicated for control design. For control implementation on digital controllers running multiple tasks, the system schedulability is essential but is not enough; the ultimate objective of satisfactory quality-of-control (QoC) performance has not been addressed directly. For networked control, the majority of the control-oriented investigations are based on two unrealistic assumptions about the network induced delay. The scheduling-oriented research focuses on schedulability and does not directly link to the overall QoC of the system. General solutions with direct QoC consideration from the network perspective to the challenging problems of network delay and packet dropout in NCS have not been found in the literature. This thesis addresses the design and implementation of real-time control systems with regard to dynamics analysis and integrated design. Three related areas have been investigated, namely control development for controllers, control implementation and scheduling on controllers, and real-time control in networked environments. Seven research problems are identified from these areas for investigation in this thesis, and accordingly seven major contributions have been claimed. Timing behaviour, quality of control, and integrated design for real-time control systems are highlighted throughout this thesis. In control design, a model-free control technique, pattern predictive control, is developed for complex reactive distillation processes. Alleviating the requirement of accurate process models, the developed control technique integrates pattern recognition, fuzzy logic, non-linear transformation, and predictive control into a unified framework to solve complex problems. Characterising the QoC indirectly with control latency and jitter, scheduling strategies for multiple control tasks are proposed to minimise the latency and/or jitter. Also, a hierarchical, QoC driven, and event-triggering feedback scheduling architecture is developed with plug-ins of either the earliest-deadline-first or fixed priority scheduling. Linking to the QoC directly, the architecture minimises the use of computing resources without sacrifice of the system QoC. It considers the control requirements, but does not rely on the control design. For real-time NCS, the dynamics of the network delay are analysed first, and the nonuniform distribution and multi-fractal nature of the delay are revealed. These results do not support two fundamental assumptions used in existing NCS literature. Then, considering the control requirements, solutions are provided to the challenging NCS problems from the network perspective. To compensate for the network delay, a real-time queuing protocol is developed to smooth out the time-varying delay and thus to achieve more predictable behaviour of packet transmissions. For control packet dropout, simple yet effective compensators are proposed. Finally, combining the queuing protocol, the packet loss compensation, the configuration of the worst-case communication delay, and the control design, an integrated design framework is developed for real-time NCS. With this framework, the network delay is limited to within a single control period, leading to simplified system analysis and improved QoC

An Integrated Framework for Multiprocessor, Multimoded Real-Time Applications

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-30598-6_2In this paper we propose an approach for building real-time systems under a combination of requirements: specification and handling of operating modes and mode changes; implementation on top of a multiprocessor platform; integration of both aspects within a common framework; and connection with schedulability analysis procedures. The proposed approach uses finite state machines to describe operating modes and transitions, and a framework of real-time utilities that implements the required behaviour in Ada 2012. Automatic code generation plays an important role: the system is derived from the functional and timing specification, and implemented according to the abstractions provided by the framework. Response time analysis enables assessing the schedulability of the different operating modes and the transitions between modes.This work was partially supported by the Vicerrectorado de Investigación of the UPV (PAID-06-10-2397), Ministerio de Ciencia e Innovación (TIN2011-28567-C03- 03) and European Union (FP7-ICT-287702)Sáez Barona, S.; Real Sáez, JV.; Crespo, A. (2012). An Integrated Framework for Multiprocessor, Multimoded Real-Time Applications. En Reliable Software Technologies – Ada-Europe 2012. Springer. 18-34. https://doi.org/10.1007/978-3-642-30598-6_21834Wellings, A.J., Burns, A.: A Framework for Real-Time Utilities for Ada 2005. Ada Letters XXVII(2) (August 2007)Real, J., Crespo, A.: Incorporating Operating Modes to an Ada Real-Time Framework. Ada Letters 30(1) (April 2010)Sáez, S., Terrasa, S., Crespo, A.: A Real-Time Framework for Multiprocessor Platforms Using Ada 2012. In: Romanovsky, A., Vardanega, T. (eds.) Ada-Europe 2011. LNCS, vol. 6652, pp. 46–60. Springer, Heidelberg (2011)Joseph, M., Pandya, P.: Finding response times in a real-time system. British Computer Society Computer Journal 29(5), 390–395 (1986)Audsley, N., Burns, A., Richardson, M., Tindell, K., Wellings, A.J.: Applying new scheduling theory to static priority pre-emptive scheduling. Software Engineering Journal 8(5), 284–292 (1993)Real, J., Crespo, A.: Mode Change Protocols for Real-Time Systems: A Survey and a new Proposal. Real-Time Systems 26(2), 161–197 (2004)Harel, D.: Statecharts: A visual formalism for complex systems. The Science of Computer Programming 8(3), 231–274 (1987)Object Management Group: Unified Modeling Language (OMG UML) V2.4 (August 2011), http://www.omg.org/spec/UML/2.4.1Sáez, S., Terrasa, S., Lorente, V., Crespo, A.: Implementing Reactive Systems with UML State Machines and Ada 2005. In: Kordon, F., Kermarrec, Y. (eds.) Ada-Europe 2009. LNCS, vol. 5570, pp. 149–163. Springer, Heidelberg (2009)Burns, A., Wellings, A.J.: Dispatching Domains for Multiprocessor Platforms and their Representation in Ada. In: Real, J., Vardanega, T. (eds.) Ada-Europe 2010. LNCS, vol. 6106, pp. 41–53. Springer, Heidelberg (2010)Barnett, J.: State Chart XML (SCXML): State Machine Notation for Control Abstraction (May 2008), http://www.w3.org/TR/scxml

Models for Deterministic Execution of Real-Time Multiprocessor Applications

International audienceWith the proliferation of multi-cores in embedded real-time systems, many industrial applications are being (re-)targeted to multiprocessor platforms. However, exactly reproducible data values at the outputs as function of the data and timing of the inputs is less trivial to realize in multiprocessors, while it can be imperative for various practical reasons. Also for parallel platforms it is harder to evaluate the task utilization and ensure schedulability, especially for end-to-end communication timing constraints and aperiodic events. Based upon reactive system extensions of Kahn process networks, we propose a model of computation that employs synchronous events and event priority relations to ensure deterministic execution. For this model, we propose an online scheduling policy and establish a link to a well-developed scheduling theory. We also implement this model in publicly available prototype tools and evaluate them on state-of-the art multi-core hardware, with a streaming benchmark and an avionics case study