2,723 research outputs found
DFT and BIST of a multichip module for high-energy physics experiments
Engineers at Politecnico di Torino designed a multichip module for high-energy physics experiments conducted on the Large Hadron Collider. An array of these MCMs handles multichannel data acquisition and signal processing. Testing the MCM from board to die level required a combination of DFT strategie
A testability metric for path delay faults and its application
Abstract — In this paper, we propose a new testability metric for path delay faults. The metric is computed efficiently using a non-enumerative algorithm. It has been validated through extensive experiments and the results indicate a strong correlation between the proposed metric and the path delay fault testability of the circuit. We further apply this metric to derive a path delay fault test application scheme for scan-based BIST. The selection of the test scheme is guided by the proposed metric. The experimental results illustrate that the derived test application scheme can achieve a higher path delay fault coverage in scan-based BIST. Because of the effectiveness and efficient computation of this metric, it can be used to derive other design-for-testability techniques for path delay faults. I
Design-for-delay-testability techniques for high-speed digital circuits
The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud
getting more and more important
Transition Faults and Transition Path Delay Faults: Test Generation, Path Selection, and Built-In Generation of Functional Broadside Tests
As the clock frequency and complexity of digital integrated circuits increase rapidly, delay testing is indispensable to guarantee the correct timing behavior of the circuits. In this dissertation, we describe methods developed for three aspects of delay testing in scan-based circuits: test generation, path selection and built-in test generation.
We first describe a deterministic broadside test generation procedure for a path delay fault model named the transition path delay fault model, which captures both large and small delay defects. Under this fault model, a path delay fault is detected only if all the individual transition faults along the path are detected by the same test. To reduce the complexity of test generation, sub-procedures with low complexity are applied before a complete branch-and-bound procedure. Next, we describe a method based on static timing analysis to select critical paths for test generation. Logic conditions that are necessary for detecting a path delay fault are considered to refine the accuracy of static timing analysis, using input necessary assignments. Input necessary assignments are input values that must be assigned to detect a fault. The method calculates more accurate path delays, selects paths that are critical during test application, and identifies undetectable path delay faults. These two methods are applicable to off-line test generation. For large circuits with high complexity and frequency, built-in test generation is a cost-effective method for delay testing. For a circuit that is embedded in a larger design, we developed a method for built-in generation of functional broadside tests to avoid excessive power dissipation during test application and the overtesting of delay faults, taking the functional constraints on the primary input sequences of the circuit into consideration. Functional broadside tests are scan-based two-pattern tests for delay faults that create functional operation conditions during test application. To avoid the potential fault coverage loss due to the exclusive use of functional broadside tests, we also developed an optional DFT method based on state holding to improve fault coverage. High delay fault coverage can be achieved by the developed method for benchmark circuits using simple hardware
Scan-Chain Intra-Cell Aware Testing
This paper first presents an evaluation of the effectiveness of different test pattern sets in terms of ability to detect possible intra-cell defects affecting the scan flip-flops. The analysis is then used to develop an effective test solution to improve the overall test quality. As a major result, the paper demonstrates that by combining test vectors generated by a commercial ATPG to detect stuck-at and delay faults, plus a fragment of extra test patterns generated to specifically target the escaped defects, we can obtain a higher intra-cell defect coverage (i.e., 6.46% on average) and a shorter test time (i.e., 42.20% on average) than by straightforwardly using an ATPG which directly targets these defects
Acceleration of Seed Ordering and Selection for High Quality Delay Test
Seed ordering and selection is a key technique to provide high-test quality with limited resources in Built-In Self Test (BIST) environment. We present a hard-to-detect delay fault selection method to accelerate the computation time in seed ordering and selection processes. This selection method can be used to restrict faults for test generation executed in an early stage in seed ordering and selection processes, and reduce a test pattern count and therefore a computation time. We evaluate the impact of the selection method both in deterministic BIST, where one test pattern is decoded from one seed, and mixed-mode BIST, where one seed is expanded to two or more patterns. The statistical delay quality level (SDQL) is adopted as test quality measure, to represent ability to detect small delay defects (SDDs). Experimental results show that our proposed method can significantly reduce computation time from 28% to 63% and base set seed counts from 21% to 67% while slightly sacrificing test quality
Efficient Path Delay Test Generation with Boolean Satisfiability
This dissertation focuses on improving the accuracy and efficiency of path delay test generation using a Boolean satisfiability (SAT) solver. As part of this research, one of the most commonly used SAT solvers, MiniSat, was integrated into the path delay test generator CodGen. A mixed structural-functional approach was implemented in CodGen where longest paths were detected using the K Longest Path Per Gate (KLPG) algorithm and path justification and dynamic compaction were handled with the SAT solver.
Advanced techniques were implemented in CodGen to further speed up the performance of SAT based path delay test generation using the knowledge of the circuit structure. SAT solvers are inherently circuit structure unaware, and significant speedup can be availed if structure information of the circuit is provided to the SAT solver. The advanced techniques explored include: Dynamic SAT Solving (DSS), Circuit Observability Don’t Care (Cir-ODC), SAT based static learning, dynamic learnt clause management and Approximate Observability Don’t Care (ACODC). Both ISCAS 89 and ITC 99 benchmarks as well as industrial circuits were used to demonstrate that the performance of CodGen was significantly improved with MiniSat and the use of circuit structure
A survey of scan-capture power reduction techniques
With the advent of sub-nanometer geometries, integrated circuits (ICs) are required to be checked for newer defects. While scan-based architectures help detect these defects using newer fault models, test data inflation happens, increasing test time and test cost. An automatic test pattern generator (ATPG) exercise’s multiple fault sites simultaneously to reduce test data which causes elevated switching activity during the capture cycle. The switching activity results in an IR drop exceeding the devices under test (DUT) specification. An increase in IR-drop leads to failure of the patterns and may cause good DUTs to fail the test. The problem is severe during at-speed scan testing, which uses a functional rated clock with a high frequency for the capture operation. Researchers have proposed several techniques to reduce capture power. They used various methods, including the reduction of switching activity. This paper reviews the recently proposed techniques. The principle, algorithm, and architecture used in them are discussed, along with key advantages and limitations. In addition, it provides a classification of the techniques based on the method used and its application. The goal is to present a survey of the techniques and prepare a platform for future development in capture power reduction during scan testing
Recommended from our members
Scalable algorithms for software based self test using formal methods
textTransistor scaling has kept up with Moore's law with a doubling of the number of transistors on a chip. More logic on a chip means more opportunities for manufacturing defects to slip in. This, in turn, has made processor testing after manufacturing a significant challenge. At-speed functional testing, being completely non-intrusive, has been seen as the ideal way of testing chips. However for processor testing, generating instruction level tests for covering all faults is a challenge given the issue of scalability. Data-path faults are relatively easier to control and observe compared to control-path faults. In this research we present a novel method to generate instruction level tests for hard to detect control-path faults in a processor. We initially map the gate level stuck-at fault to the Register Transfer Level (RTL) and build an equivalent faulty RTL model. The fault activation and propagation constraints are captured using Control and Data Flow Graphs of the RTL as a Liner Temporal Logic (LTL) property. This LTL property is then negated and given to a Bounded Model Checker based on a Bit-Vector Satisfiability Module Theories (SMT) solver. From the counter-example to the property we can extract a sequence of instructions that activates the gate level fault and propagates the fault effect to one of the observable points in the design. Other than the user supplying instruction constraints, this approach is completely automatic and does not require any manual intervention. Not all the design behaviors are required to generate a test for a fault. We use this insight to scale our previous methodology further. Underapproximations are design abstractions that only capture a subset of the original design behaviors. The use of RTL for test generation affords us two types of under-approximations: bit-width reduction and operator approximation. These are abstractions that perform reductions based on semantics of the RTL design. We also explore structural reductions of the RTL, called path based search, where we search through error propagation paths incrementally. This approach increases the size of the test generation problem step by step. In this way the SMT solver searches through the state space piecewise rather than doing the entire search at once. Experimental results show that our methods are robust and scalable for generating functional tests for hard to detect faults.Electrical and Computer Engineerin
Recommended from our members
Improving timing verification and delay testing methodologies for IC designs
textThe task of ensuring the correct temporal behavior of IC designs,
both before and after fabrication, is extremely important. It is becoming
even more imperative as the demand for performance increases and process
technology advances into the deep sub-micron region.
This dissertation tackles the key issues in the timing verification
and delay testing methodologies. An efficient methodology is presented to
identify false timing paths in the timing verification methodology which utilizes
ATPG technique and timing information from an ordered list of timing
paths according to the delay information. This dissertation also presents a
speed binning methodology which utilizes structural delay tests successfully
instead of functional tests. In addition, it establishes a methodology which
quantifies the correlation between the timing verification prediction and
actual silicon measurement of timing paths. This quantification methodology
lays the foundation for further research to study the impact of deep
submicron effects on design performanceElectrical and Computer Engineerin
- …