31 research outputs found

    All-optical membrane InP switch on silicon for access applications

    Get PDF
    Using an integrated membrane switch on SOI, optical clock distribution is achieved while all-optical switching of datapackets is maintained. Transmission through 25km SMF is demonstrated with 1.5dB penalty, limited by signal OSNR and pump extinction

    Optically reconfigurable 1 x 4 remote node switch for access networks

    Get PDF
    In this paper we demonstrate an optically controlled 1 x 4 remote node switch, based on membrane InP switches bonded to a silicon-on-insulator circuit. We show that the switch exhibits cross talk better than 25 dB between the output ports, and that the switch operates without receiver sensitivity penalty. Furthermore, the proposed switch architecture allows for optical clock distribution as a means to avoid the need for clock recovery at the receiver side. This is demonstrated in a proof-of-principle experiment where data and clock are sent through a single membrane InP switch

    Optically Reconfigurable 1x4 Silicon-on-Insulator Remote Node Switch for Access Networks

    Get PDF
    Operation of an optically controlled 1x4 remote node, based on membrane InP switches and SOI waveguide circuits, is shown. Extinction ratio >25dB and penalty-free operation for 10Gb/s 2(31)-1 PRBS data through the switch are demonstrated

    Nonlinear Single-photon Generation for Photonic Quantum Technology

    Get PDF
    Single photons are the smallest indivisible quanta of light, canonically described by quantum mechanics. By carefully controlling the interaction of single photons, exquisite non-classical phenomena can be observed. Mature photonic chip technology has recently emerged as an ideal platform for quantum information processing using single photons. However, generating single photons efficiently on-chip remains a fundamental challenge. One solution is to harness the intrinsic nonlinearity available in certain photonic materials for nonlinear photon generation directly in on-chip waveguides themselves. This work examines nonlinear photon generation in two key material platforms. The first is chalcogenide glass. Chalcogenide, while highly nonlinear, is amorphous and thus has broadband Raman noise. In this study the Raman noise is characterised at the single-photon level to find an intrinsic minima, which is then targeted for low-noise photon generation using an engineered waveguide. The second platform is silicon. As silicon is complementary metal-oxide-semiconductor (CMOS) fabrication compatible, it is congruent with mass production. Thus, in this study, photon-pair generation is first shown in a compact photonic crystal, before combining two monolithic sources using active multiplexing. This thesis presents significant progress towards a key goal of the field – on- demand photon generation in a fully integrated photonic quantum processor

    Optically Reconfigurable 1×4 Silicon-on-Insulator Remote Node Switch for Access Networks

    Full text link
    Operation of an optically controlled 1×4 remote node, based on membrane InP switches and SOI waveguide circuits, is shown. Extinction ratio 25dB and penalty-free operation for 10Gb/s 231-1 PRBS data through the switch are demonstrated

    All Optical Signal Processing Technologies in Optical Fiber Communication

    Get PDF
    Due to continued growth of internet at starling rate and the introduction of new broadband services, such as cloud computing, IPTV and high-definition media streaming, there is a requirement for flexible bandwidth infrastructure that supports mobility of data at peta-scale. Elastic networking based on gridless spectrum technology is evolving as a favorable solution for the flexible optical networking supportive next generation traffic requirements. Recently, research is centered on a more elastic spectrum provision methodology than the traditional ITU-T grid. The main issue is the requirement for a transmission connect, capable of accommodating and handling a variety of signals with distinct modulation format, baud rate and spectral occupancy. Segmented use of the spectrum could lead to the shortage of availableness of sufficiently extensive spectrum spaces for high bitrate channels, resulting in wavelength contention. On-demand space assignment creates not only deviation from the ideal course but also have spectrum fragmentation, which reduces spectrum resource utilization. This chapter reviewed the recent research development of feasible solutions for the efficient transport of heterogeneous traffic by enhancing the flexibility of the optical layer for performing allocation of network resources as well as implementation of optical node by all optical signal processing in optical fiber communication

    Nonlinear Single-photon Generation for Photonic Quantum Technology

    Get PDF
    Single photons are the smallest indivisible quanta of light, canonically described by quantum mechanics. By carefully controlling the interaction of single photons, exquisite non-classical phenomena can be observed. Mature photonic chip technology has recently emerged as an ideal platform for quantum information processing using single photons. However, generating single photons efficiently on-chip remains a fundamental challenge. One solution is to harness the intrinsic nonlinearity available in certain photonic materials for nonlinear photon generation directly in on-chip waveguides themselves. This work examines nonlinear photon generation in two key material platforms. The first is chalcogenide glass. Chalcogenide, while highly nonlinear, is amorphous and thus has broadband Raman noise. In this study the Raman noise is characterised at the single-photon level to find an intrinsic minima, which is then targeted for low-noise photon generation using an engineered waveguide. The second platform is silicon. As silicon is complementary metal-oxide-semiconductor (CMOS) fabrication compatible, it is congruent with mass production. Thus, in this study, photon-pair generation is first shown in a compact photonic crystal, before combining two monolithic sources using active multiplexing. This thesis presents significant progress towards a key goal of the field – on- demand photon generation in a fully integrated photonic quantum processor

    Design and characterisation of a ferroelectric liquid crystal over silicon spatial light modulator

    Get PDF
    Many optical processing systems rely critically on the availability of high performance, electrically-addressed spatial light modulators. Ferroelectric liquid crystal over silicon is an attractive spatial light modulator technology because it combines two well matched technologies. Ferroelectric liquid crystal modulating materials exhibit fast switching times with low operating voltages, while very large scale silicon integrated circuits offer high-frequency, low power operation, and versatile functionality. This thesis describes the design and characterisation of the SBS256 - a general purpose 256 x 256 pixel ferroelectric liquid crystal over silicon spatial light modulator that incorporates a static-RAM latch and an exclusive-OR gate at each pixel. The static-RAM latch provides robust data storage under high read-beam intensities, while the exclusive-OR gate permits the liquid crystal layer to be fully and efficiently charge balanced. The SBS256 spatial light modulator operates in a binary mode. However, many applications, including helmet-mounted displays and optoelectronic implementations of artificial neural networks, require devices with some level of grey-scale capability. The 2 kHz frame rate of the device, permits temporal multiplexing to be used as a means of generating discrete grey-scale in real-time. A second integrated circuit design is also presented. This prototype neuraldetector backplane consists of a 4 x 4 array of optical-in, electronic-out processing units. These can sample the temporally multiplexed grey-scale generated by the SBS256. The neurons implement the post-synaptic summing and thresholding function, and can respond to both positive and negative activations - a requirement of many artificial neural network models

    Optical Switching for Scalable Data Centre Networks

    Get PDF
    This thesis explores the use of wavelength tuneable transmitters and control systems within the context of scalable, optically switched data centre networks. Modern data centres require innovative networking solutions to meet their growing power, bandwidth, and scalability requirements. Wavelength routed optical burst switching (WROBS) can meet these demands by applying agile wavelength tuneable transmitters at the edge of a passive network fabric. Through experimental investigation of an example WROBS network, the transmitter is shown to determine system performance, and must support ultra-fast switching as well as power efficient transmission. This thesis describes an intelligent optical transmitter capable of wideband sub-nanosecond wavelength switching and low-loss modulation. A regression optimiser is introduced that applies frequency-domain feedback to automatically enable fast tuneable laser reconfiguration. Through simulation and experiment, the optimised laser is shown to support 122×50 GHz channels, switching in less than 10 ns. The laser is deployed as a component within a new wavelength tuneable source (WTS) composed of two time-interleaved tuneable lasers and two semiconductor optical amplifiers. Switching over 6.05 THz is demonstrated, with stable switch times of 547 ps, a record result. The WTS scales well in terms of chip-space and bandwidth, constituting the first demonstration of scalable, sub-nanosecond optical switching. The power efficiency of the intelligent optical transmitter is further improved by introduction of a novel low-loss split-carrier modulator. The design is evaluated using 112 Gb/s/λ intensity modulated, direct-detection signals and a single-ended photodiode receiver. The split-carrier transmitter is shown to achieve hard decision forward error correction ready performance after 2 km of transmission using a laser output power of just 0 dBm; a 5.2 dB improvement over the conventional transmitter. The results achieved in the course of this research allow for ultra-fast, wideband, intelligent optical transmitters that can be applied in the design of all-optical data centres for power efficient, scalable networking
    corecore