ITERL: A Wireless Adaptive System for Efficient Road Lighting

This work presents the development and construction of an adaptive street lighting system that improves safety at intersections, which is the result of applying low-power Internet of Things (IoT) techniques to intelligent transportation systems. A set of wireless sensor nodes using the Institute of Electrical and Electronics Engineers (IEEE) 802.15.4 standard with additional internet protocol (IP) connectivity measures both ambient conditions and vehicle transit. These measurements are sent to a coordinator node that collects and passes them to a local controller, which then makes decisions leading to the streetlight being turned on and its illumination level controlled. Streetlights are autonomous, powered by photovoltaic energy, and wirelessly connected, achieving a high degree of energy efficiency. Relevant data are also sent to the highway conservation center, allowing it to maintain up-to-date information for the system, enabling preventive maintenance.Consejería de Fomento y Vivienda Junta de Andalucía G-GI3002 / IDIOFondo Europeo de Desarrollo Regional G-GI3002 / IDI

Integrated Design and Implementation of Embedded Control Systems with Scilab

Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly time-consuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost.Comment: 15 pages, 14 figures; Open Access at http://www.mdpi.org/sensors/papers/s8095501.pd

Design and Development of a Testbed Prototype for Cognitive Radio Transmission over TV White Space

Considering the ever-increasing demand and the associated high costs of wireless electromagnetic spectrum, technologies that can facilitate efficient spectrum utilization are of utmost importance. Cognitive radio (CR), in conjunction with TV White Spaces (TVWS), can be a viable solution, where unlicensed or secondary users can opportunistically use the not-currently-in-use, aka idle, TV channels registered to licensed or primary users. This thesis focuses on the design and development of a testbed prototype for real-time testing of secondary user transmission in TVWS. Once an unused TV channel has been identified, our system uses that idle channel for transmitting and receiving signals. The testbed is built on Universal Software Radio Peripheral (USRP) device powered by GNU Radio Software, Software Defined Radio (SDR) receptor, and Spectrum Analyser. The developed prototype splits a given TVWS channel into multiple small sub-channels and performs channel characterization through end-to-end transmission and reception of information carrying signals. The channel characteristics are presented through Bit Transfer Rate (BTR) and frequency spectrum results. The prototype also facilitates provisions for applying error correction coding as a mean of undertaking comparative performance testing

Battery-Less Industrial Wireless Monitoring and Control System for Improved Operational Efficiency

An industrial wireless monitoring and control system, capable of supporting energyharvesting devices through smart sensing and network management, designed for improving electrorefinery performance by applying predictive maintenance, is presented. The system is self-powered from bus bars, and features wireless communication and easy-to-access information and alarms. With cell voltage and electrolyte temperature measurements, the system enables real-time cell performance discovery and early reaction to critical production or quality disturbances such as short-circuiting, flow blockages, or electrolyte temperature excursions. Field validation shows an increase in operational performance of 30% (reaching 97%) in the detection of short circuits, which, thanks to a neural network deployed, are detected, on average, 10.5 h earlier compared to the traditional methodology. The developed system is a sustainable IoT solution, being easy to maintain after its deployment, and providing benefits of improved control and operation, increased current efficiency, and decreased maintenance costs.The authors would like to thank the Technological Corporation of Andalusia (CTA) and Atlantic Copper S.L.U. company for funding this research under projects 19/1008 and 22/1077

Bridges Structural Health Monitoring and Deterioration Detection Synthesis of Knowledge and Technology

INE/AUTC 10.0

CITRIC: A low-bandwidth wireless camera network platform

In this paper, we propose and demonstrate a novel wireless camera network system, called CITRIC. The core component of this system is a new hardware platform that integrates a camera, a frequency-scalable (up to 624 MHz) CPU, 16 MB FLASH, and 64 MB RAM onto a single device. The device then connects with a standard sensor network mote to form a camera mote. The design enables in-network processing of images to reduce communication requirements, which has traditionally been high in existing camera networks with centralized processing. We also propose a back-end client/server architecture to provide a user interface to the system and support further centralized processing for higher-level applications. Our camera mote enables a wider variety of distributed pattern recognition applications than traditional platforms because it provides more computing power and tighter integration of physical components while still consuming relatively little power. Furthermore, the mote easily integrates with existing low-bandwidth sensor networks because it can communicate over the IEEE 802.15.4 protocol with other sensor network platforms. We demonstrate our system on three applications: image compression, target tracking, and camera localization

Field Programmable Gate Arrays (FPGAs) II

This Edited Volume Field Programmable Gate Arrays (FPGAs) II is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of Computer and Information Science. The book comprises single chapters authored by various researchers and edited by an expert active in the Computer and Information Science research area. All chapters are complete in itself but united under a common research study topic. This publication aims at providing a thorough overview of the latest research efforts by international authors on Computer and Information Science, and open new possible research paths for further novel developments