Localisation in wireless sensor networks for disaster recovery and rescuing in built environments

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirements for the degree of Doctor of PhilosophyProgress in micro-electromechanical systems (MEMS) and radio frequency (RF) technology has fostered the development of wireless sensor networks (WSNs). Different from traditional networks, WSNs are data-centric, self-configuring and self-healing. Although WSNs have been successfully applied in built environments (e.g. security and services in smart homes), their applications and benefits have not been fully explored in areas such as disaster recovery and rescuing. There are issues related to self-localisation as well as practical constraints to be taken into account. The current state-of-the art communication technologies used in disaster scenarios are challenged by various limitations (e.g. the uncertainty of RSS). Localisation in WSNs (location sensing) is a challenging problem, especially in disaster environments and there is a need for technological developments in order to cater to disaster conditions. This research seeks to design and develop novel localisation algorithms using WSNs to overcome the limitations in existing techniques. A novel probabilistic fuzzy logic based range-free localisation algorithm (PFRL) is devised to solve localisation problems for WSNs. Simulation results show that the proposed algorithm performs better than other range free localisation algorithms (namely DVhop localisation, Centroid localisation and Amorphous localisation) in terms of localisation accuracy by 15-30% with various numbers of anchors and degrees of radio propagation irregularity. In disaster scenarios, for example, if WSNs are applied to sense fire hazards in building, wireless sensor nodes will be equipped on different floors. To this end, PFRL has been extended to solve sensor localisation problems in 3D space. Computational results show that the 3D localisation algorithm provides better localisation accuracy when varying the system parameters with different communication/deployment models. PFRL is further developed by applying dynamic distance measurement updates among the moving sensors in a disaster environment. Simulation results indicate that the new method scales very well

RFID Localisation For Internet Of Things Smart Homes: A Survey

The Internet of Things (IoT) enables numerous business opportunities in fields as diverse as e-health, smart cities, smart homes, among many others. The IoT incorporates multiple long-range, short-range, and personal area wireless networks and technologies into the designs of IoT applications. Localisation in indoor positioning systems plays an important role in the IoT. Location Based IoT applications range from tracking objects and people in real-time, assets management, agriculture, assisted monitoring technologies for healthcare, and smart homes, to name a few. Radio Frequency based systems for indoor positioning such as Radio Frequency Identification (RFID) is a key enabler technology for the IoT due to its costeffective, high readability rates, automatic identification and, importantly, its energy efficiency characteristic. This paper reviews the state-of-the-art RFID technologies in IoT Smart Homes applications. It presents several comparable studies of RFID based projects in smart homes and discusses the applications, techniques, algorithms, and challenges of adopting RFID technologies in IoT smart home systems.Comment: 18 pages, 2 figures, 3 table

GUARDIANS final report

Emergencies in industrial warehouses are a major concern for firefghters. The large dimensions together with the development of dense smoke that drastically reduces visibility, represent major challenges. The Guardians robot swarm is designed to assist fire fighters in searching a large warehouse. In this report we discuss the technology developed for a swarm of robots searching and assisting fire fighters. We explain the swarming algorithms which provide the functionality by which the robots react to and follow humans while no communication is required. Next we discuss the wireless communication system, which is a so-called mobile ad-hoc network. The communication network provides also one of the means to locate the robots and humans. Thus the robot swarm is able to locate itself and provide guidance information to the humans. Together with the re ghters we explored how the robot swarm should feed information back to the human fire fighter. We have designed and experimented with interfaces for presenting swarm based information to human beings

Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

D-SLATS: Distributed Simultaneous Localization and Time Synchronization

Through the last decade, we have witnessed a surge of Internet of Things (IoT) devices, and with that a greater need to choreograph their actions across both time and space. Although these two problems, namely time synchronization and localization, share many aspects in common, they are traditionally treated separately or combined on centralized approaches that results in an ineffcient use of resources, or in solutions that are not scalable in terms of the number of IoT devices. Therefore, we propose D-SLATS, a framework comprised of three different and independent algorithms to jointly solve time synchronization and localization problems in a distributed fashion. The First two algorithms are based mainly on the distributed Extended Kalman Filter (EKF) whereas the third one uses optimization techniques. No fusion center is required, and the devices only communicate with their neighbors. The proposed methods are evaluated on custom Ultra-Wideband communication Testbed and a quadrotor, representing a network of both static and mobile nodes. Our algorithms achieve up to three microseconds time synchronization accuracy and 30 cm localization error

Visual / acoustic detection and localisation in embedded systems

©Cranfield UniversityThe continuous miniaturisation of sensing and processing technologies is increasingly offering a variety of embedded platforms, enabling the accomplishment of a broad range of tasks using such systems. Motivated by these advances, this thesis investigates embedded detection and localisation solutions using vision and acoustic sensors. Focus is particularly placed on surveillance applications using sensor networks. Existing vision-based detection solutions for embedded systems suffer from the sensitivity to environmental conditions. In the literature, there seems to be no algorithm able to simultaneously tackle all the challenges inherent to real-world videos. Regarding the acoustic modality, many research works have investigated acoustic source localisation solutions in distributed sensor networks. Nevertheless, it is still a challenging task to develop an ecient algorithm that deals with the experimental issues, to approach the performance required by these systems and to perform the data processing in a distributed and robust manner. The movement of scene objects is generally accompanied with sound emissions with features that vary from an environment to another. Therefore, considering the combination of the visual and acoustic modalities would offer a significant opportunity for improving the detection and/or localisation using the described platforms. In the light of the described framework, we investigate in the first part of the thesis the use of a cost-effective visual based method that can deal robustly with the issue of motion detection in static, dynamic and moving background conditions. For motion detection in static and dynamic backgrounds, we present the development and the performance analysis of a spatio- temporal form of the Gaussian mixture model. On the other hand, the problem of motion detection in moving backgrounds is addressed by accounting for registration errors in the captured images. By adopting a robust optimisation technique that takes into account the uncertainty about the visual measurements, we show that high detection accuracy can be achieved. In the second part of this thesis, we investigate solutions to the problem of acoustic source localisation using a trust region based optimisation technique. The proposed method shows an overall higher accuracy and convergence improvement compared to a linear-search based method. More importantly, we show that through characterising the errors in measurements, which is a common problem for such platforms, higher accuracy in the localisation can be attained. The last part of this work studies the different possibilities of combining visual and acoustic information in a distributed sensors network. In this context, we first propose to include the acoustic information in the visual model. The obtained new augmented model provides promising improvements in the detection and localisation processes. The second investigated solution consists in the fusion of the measurements coming from the different sensors. An evaluation of the accuracy of localisation and tracking using a centralised/decentralised architecture is conducted in various scenarios and experimental conditions. Results have shown the capability of this fusion approach to yield higher accuracy in the localisation and tracking of an active acoustic source than by using a single type of data