4,113 research outputs found
Recommended from our members
Multiobjective control of a four-link flexible manipulator: A robust H∞ approach
Copyright [2002] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.This paper presents an approach to robust H∞ control of a real multilink flexible manipulator via regional pole assignment. We first show that the manipulator system can be approximated by a linear continuous uncertain model with exogenous disturbance input. The uncertainty occurring in an operating space is assumed to be norm-bounded and enter into both the system and control matrices. Then, a multiobjective simultaneous realization problem is studied. The purpose of this problem is to design a state feedback controller such that, for all admissible parameter uncertainties, the closed-loop system simultaneously satisfies both the prespecified H∞ norm constraint on the transfer function from the disturbance input to the system output and the prespecified circular pole constraint on the closed-loop system matrix. An algebraic parameterized approach is developed to characterize the existence conditions as well as the analytical expression of the desired controllers. Third, by comparing with the traditional linear quadratic regulator control method in the sense of robustness and tracking precision, we provide both the simulation and experimental results to demonstrate the effectiveness and advantages of the proposed approach
Integral Resonant Control for vibration damping and precise tip-positioning of a single-link flexible manipulator
Peer reviewedPostprin
Nonlinear Receding-Horizon Control of Rigid Link Robot Manipulators
The approximate nonlinear receding-horizon control law is used to treat the
trajectory tracking control problem of rigid link robot manipulators. The
derived nonlinear predictive law uses a quadratic performance index of the
predicted tracking error and the predicted control effort. A key feature of
this control law is that, for their implementation, there is no need to perform
an online optimization, and asymptotic tracking of smooth reference
trajectories is guaranteed. It is shown that this controller achieves the
positions tracking objectives via link position measurements. The stability
convergence of the output tracking error to the origin is proved. To enhance
the robustness of the closed loop system with respect to payload uncertainties
and viscous friction, an integral action is introduced in the loop. A nonlinear
observer is used to estimate velocity. Simulation results for a two-link rigid
robot are performed to validate the performance of the proposed controller.
Keywords: receding-horizon control, nonlinear observer, robot manipulators,
integral action, robustness
Multirate sampled-data yaw-damper and modal suppression system design
A multirate control law synthesized algorithm based on an infinite-time quadratic cost function, was developed along with a method for analyzing the robustness of multirate systems. A generalized multirate sampled-data control law structure (GMCLS) was introduced. A new infinite-time-based parameter optimization multirate sampled-data control law synthesis method and solution algorithm were developed. A singular-value-based method for determining gain and phase margins for multirate systems was also developed. The finite-time-based parameter optimization multirate sampled-data control law synthesis algorithm originally intended to be applied to the aircraft problem was instead demonstrated by application to a simpler problem involving the control of the tip position of a two-link robot arm. The GMCLS, the infinite-time-based parameter optimization multirate control law synthesis method and solution algorithm, and the singular-value based method for determining gain and phase margins were all demonstrated by application to the aircraft control problem originally proposed for this project
Passive dynamic controllers for nonlinear mechanical systems
A methodology for model-independant controller design for controlling large angular motion of multi-body dynamic systems is outlined. The controlled system may consist of rigid and flexible components that undergo large rigid body motion and small elastic deformations. Control forces/torques are applied to drive the system and at the same time suppress the vibration due to flexibility of the components. The proposed controller consists of passive second-order systems which may be designed with little knowledge of the system parameter, even if the controlled system is nonlinear. Under rather general assumptions, the passive design assures that the closed loop system has guaranteed stability properties. Unlike positive real controller design, stabilization can be accomplished without direct velocity feedback. In addition, the second-order passive design allows dynamic feedback controllers with considerable freedom to tune for desired system response, and to avoid actuator saturation. After developing the basic mathematical formulation of the design methodology, simulation results are presented to illustrate the proposed approach to a flexible six-degree-of-freedom manipulator
NASA Center for Intelligent Robotic Systems for Space Exploration
NASA's program for the civilian exploration of space is a challenge to scientists and engineers to help maintain and further develop the United States' position of leadership in a focused sphere of space activity. Such an ambitious plan requires the contribution and further development of many scientific and technological fields. One research area essential for the success of these space exploration programs is Intelligent Robotic Systems. These systems represent a class of autonomous and semi-autonomous machines that can perform human-like functions with or without human interaction. They are fundamental for activities too hazardous for humans or too distant or complex for remote telemanipulation. To meet this challenge, Rensselaer Polytechnic Institute (RPI) has established an Engineering Research Center for Intelligent Robotic Systems for Space Exploration (CIRSSE). The Center was created with a five year $5.5 million grant from NASA submitted by a team of the Robotics and Automation Laboratories. The Robotics and Automation Laboratories of RPI are the result of the merger of the Robotics and Automation Laboratory of the Department of Electrical, Computer, and Systems Engineering (ECSE) and the Research Laboratory for Kinematics and Robotic Mechanisms of the Department of Mechanical Engineering, Aeronautical Engineering, and Mechanics (ME,AE,&M), in 1987. This report is an examination of the activities that are centered at CIRSSE
A family of asymptotically stable control laws for flexible robots based on a passivity approach
A general family of asymptotically stabilizing control laws is introduced for a class of nonlinear Hamiltonian systems. The inherent passivity property of this class of systems and the Passivity Theorem are used to show the closed-loop input/output stability which is then related to the internal state space stability through the stabilizability and detectability condition. Applications of these results include fully actuated robots, flexible joint robots, and robots with link flexibility
Handling robot constraints within a Set-Based Multi-Task Priority Inverse Kinematics Framework
Set-Based Multi-Task Priority is a recent framework to handle inverse
kinematics for redundant structures. Both equality tasks, i.e., control
objectives to be driven to a desired value, and set-bases tasks, i.e., control
objectives to be satisfied with a set/range of values can be addressed in a
rigorous manner within a priority framework. In addition, optimization tasks,
driven by the gradient of a proper function, may be considered as well, usually
as lower priority tasks. In this paper the proper design of the tasks, their
priority and the use of a Set-Based Multi-Task Priority framework is proposed
in order to handle several constraints simultaneously in real-time. It is shown
that safety related tasks such as, e.g., joint limits or kinematic singularity,
may be properly handled by consider them both at an higher priority as
set-based task and at a lower within a proper optimization functional.
Experimental results on a 7DOF Jaco$^2
An Energy-based Approach to Ensure the Stability of Learned Dynamical Systems
Non-linear dynamical systems represent a compact, flexible, and robust tool
for reactive motion generation. The effectiveness of dynamical systems relies
on their ability to accurately represent stable motions. Several approaches
have been proposed to learn stable and accurate motions from demonstration.
Some approaches work by separating accuracy and stability into two learning
problems, which increases the number of open parameters and the overall
training time. Alternative solutions exploit single-step learning but restrict
the applicability to one regression technique. This paper presents a
single-step approach to learn stable and accurate motions that work with any
regression technique. The approach makes energy considerations on the learned
dynamics to stabilize the system at run-time while introducing small deviations
from the demonstrated motion. Since the initial value of the energy injected
into the system affects the reproduction accuracy, it is estimated from
training data using an efficient procedure. Experiments on a real robot and a
comparison on a public benchmark shows the effectiveness of the proposed
approach.Comment: Accepted at the International Conference on Robotics and Automation
202
- …