894 research outputs found
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
IPI Removing by Using Reference Sign/N-ary Orthogonal Coded/Balanced TR-UWB Receiver for WPAN Based on Hadamard Matrix
IR UWB system has been proposed as a promising physical layer candidate for indoor wireless communications, because it offers very fine time resolution and multipath resolvability. Inter pulse interference (IPI) is one important challenge related to the transmit reference (TR) IR UWB receiver. In this paper, an attempt to completely remove the IPI problem in TR with increasing the data rate. This is achieved by using orthogonal codes generated from modified
version of Hadamard matrix via the application of the reference sign technique, i.e., by modulating the reference pulse besides the
already data modulate
COMPLEX PULSE FORMING TEACHNIQUE USING AM DETECTOR TYPE CIRCUITRY AND THE APPLICATION OF CDMA TO RFID FOR THE SIMULTANEOUS READING OF MULTIPLE TAGS
A novel complex ultra wideband RF pulse forming technique has been implemented in this research, using the coefficients derived from discrete Fourier transform of a virtual pulse train. Incorporated in this technique is a multiple frequency communication systems designed such that transmitter receiver proximity and the fading effect of the individual frequencies make part of a corresponding modulation technique. A code division multiple access (CDMA) application to RFID to greatly reduce read time, while at the same time eliminating inter tag interference, has been investigated with the analysis of a typical cart aisle scenario. With the current rate of growth of inventory world wide there is a tremendous need for more efficient method of data gathering, data storage, and data retrieval. In this dissertation, the application of the CDMA RFID technology has been analyzed to demonstrate the potentials of integrating the RFID technology to the EPC global numbering system
Ultra Wideband Communications: from Analog to Digital
Ultrabreitband-Signale (Ultra Wideband [UWB]) können einen
signifikanten Nutzen im Bereich drahtloser Kommunikationssysteme haben. Es
sind jedoch noch einige Probleme offen, die durch Systemdesigner und
Wissenschaftler gelöst werden müssen. Ein Funknetzsystem mit einer derart
großen Bandbreite ist normalerweise auch durch eine große Anzahl an
Mehrwegekomponenten mit jeweils verschiedenen Pfadamplituden
gekennzeichnet. Daher ist es schwierig, die zeitlich verteilte Energie
effektiv zu erfassen. Außerdem ist in vielen Fällen der naheliegende
Ansatz, ein kohärenter Empfänger im Sinne eines signalangepassten Filters
oder eines Korrelators, nicht unbedingt die beste Wahl. In der vorliegenden
Arbeit wird dabei auf die bestehende Problematik und weitere
Lösungsmöglichkeiten eingegangen.
Im ersten Abschnitt geht es um „Impulse Radio UWB”-Systeme mit
niedriger Datenrate. Bei diesen Systemen kommt ein inkohärenter Empfänger
zum Einsatz. Inkohärente Signaldetektion stellt insofern einen
vielversprechenden Ansatz dar, als das damit aufwandsgünstige und robuste
Implementierungen möglich sind. Dies trifft vor allem in Anwendungsfällen
wie den von drahtlosen Sensornetzen zu, wo preiswerte Geräte mit langer
Batterielaufzeit nötigsind. Dies verringert den für die Kanalschätzung
und die Synchronisation nötigen Aufwand, was jedoch auf Kosten der
Leistungseffizienz geht und eine erhöhte Störempfindlichkeit gegenüber
Interferenz (z.B. Interferenz durch mehrere Nutzer oder schmalbandige
Interferenz) zur Folge hat.
Um die Bitfehlerrate der oben genannten Verfahren zu bestimmen, wurde
zunächst ein inkohärenter Combining-Verlust spezifiziert, welcher
auftritt im Gegensatz zu kohärenter Detektion mit Maximum Ratio Multipath
Combining. Dieser Verlust hängt von dem Produkt aus der Länge des
Integrationsfensters und der Signalbandbreite ab.
Um den Verlust durch inkohärentes Combining zu reduzieren und somit die
Leistungseffizienz des Empfängers zu steigern, werden verbesserte
Combining-Methoden für Mehrwegeempfang vorgeschlagen. Ein analoger
Empfänger, bei dem der Hauptteil des Mehrwege-Combinings durch einen
„Integrate and Dump”-Filter implementiert ist, wird für UWB-Systeme
mit Zeit-Hopping gezeigt. Dabei wurde die Einsatzmöglichkeit von dünn
besetzten Codes in solchen System diskutiert und bewertet. Des Weiteren
wird eine Regel für die Code-Auswahl vorgestellt, welche die Stabilität
des Systems gegen Mehrnutzer-Störungen sicherstellt und gleichzeitig den
Verlust durch inkohärentes Combining verringert.
Danach liegt der Fokus auf digitalen Lösungen bei inkohärenter
Demodulation. Im Vergleich zum Analogempfänger besitzt ein
Digitalempfänger einen Analog-Digital-Wandler im Zeitbereich gefolgt von
einem digitalen Optimalfilter. Der digitale Optimalfilter dekodiert den
Mehrfachzugriffscode kohärent und beschränkt das inkohärente Combining
auf die empfangenen Mehrwegekomponenten im Digitalbereich. Es kommt ein
schneller Analog-Digital-Wandler mit geringer Auflösung zum Einsatz, um
einen vertretbaren Energieverbrauch zu gewährleisten. Diese Digitaltechnik
macht den Einsatz langer Analogverzögerungen bei differentieller
Demodulation unnötig und ermöglicht viele Arten der digitalen
Signalverarbeitung. Im Vergleich zur Analogtechnik reduziert sie nicht nur
den inkohärenten Combining-Verlust, sonder zeigt auch eine stärkere
Resistenz gegenüber Störungen. Dabei werden die Auswirkungen der
Auflösung und der Abtastrate der Analog-Digital-Umsetzung analysiert. Die
Resultate zeigen, dass die verminderte Effizienz solcher
Analog-Digital-Wandler gering ausfällt. Weiterhin zeigt sich, dass im
Falle starker Mehrnutzerinterferenz sogar eine Verbesserung der Ergebnisse
zu beobachten ist. Die vorgeschlagenen Design-Regeln spezifizieren die
Anwendung der Analog-Digital-Wandler und die Auswahl der Systemparameter in
Abhängigkeit der verwendeten Mehrfachzugriffscodes und der Modulationsart.
Wir zeigen, wie unter Anwendung erweiterter Modulationsverfahren die
Leistungseffizienz verbessert werden kann und schlagen ein Verfahren zur
Unterdrückung schmalbandiger Störer vor, welches auf Soft Limiting
aufbaut. Durch die Untersuchungen und Ergebnissen zeigt sich, dass
inkohärente Empfänger in UWB-Kommunikationssystemen mit niedriger
Datenrate ein großes Potential aufweisen.
Außerdem wird die Auswahl der benutzbaren Bandbreite untersucht, um einen
Kompromiss zwischen inkohärentem Combining-Verlust und Stabilität
gegenüber langsamen Schwund zu erreichen. Dadurch wurde ein neues Konzept
für UWB-Systeme erarbeitet: wahlweise kohärente oder inkohärente
Empfänger, welche als UWB-Systeme Frequenz-Hopping nutzen. Der wesentliche
Vorteil hiervon liegt darin, dass die Bandbreite im Basisband sich deutlich
verringert. Mithin ermöglicht dies einfach zu realisierende digitale
Signalverarbeitungstechnik mit kostengünstigen Analog-Digital-Wandlern.
Dies stellt eine neue Epoche in der Forschung im Bereich drahtloser
Sensorfunknetze dar.
Der Schwerpunkt des zweiten Abschnitts stellt adaptiven Signalverarbeitung
für hohe Datenraten mit „Direct Sequence”-UWB-Systemen in den
Vordergrund. In solchen Systemen entstehen, wegen der großen Anzahl der
empfangenen Mehrwegekomponenten, starke Inter- bzw.
Intrasymbolinterferenzen. Außerdem kann die Funktionalität des Systems
durch Mehrnutzerinterferenz und Schmalbandstörungen deutlich beeinflusst
werden. Um sie zu eliminieren, wird die „Widely Linear”-Rangreduzierung
benutzt. Dabei verbessert die Rangreduzierungsmethode das
Konvergenzverhalten, besonders wenn der gegebene Vektor eine sehr große
Anzahl an Abtastwerten beinhaltet (in Folge hoher einer Abtastrate).
Zusätzlich kann das System durch die Anwendung der R-linearen Verarbeitung
die Statistik zweiter Ordnung des nicht-zirkularen Signals vollständig
ausnutzen, was sich in verbesserten Schätzergebnissen widerspiegelt.
Allgemeine kann die Methode der „Widely Linear”-Rangreduzierung auch in
andern Bereichen angewendet werden, z.B. in „Direct
Sequence”-Codemultiplexverfahren (DS-CDMA), im MIMO-Bereich, im Global
System for Mobile Communications (GSM) und beim Beamforming.The aim of this thesis is to investigate key issues encountered in the
design of transmission schemes and receiving techniques for Ultra Wideband
(UWB) communication systems. Based on different data rate applications,
this work is divided into two parts, where energy efficient and robust
physical layer solutions are proposed, respectively.
Due to a huge bandwidth of UWB signals, a considerable amount of multipath
arrivals with various path gains is resolvable at the receiver. For low
data rate impulse radio UWB systems, suboptimal non-coherent detection is a
simple way to effectively capture the multipath energy. Feasible techniques
that increase the power efficiency and the interference robustness of
non-coherent detection need to be investigated. For high data rate direct
sequence UWB systems, a large number of multipath arrivals results in
severe inter-/intra-symbol interference. Additionally, the system
performance may also be deteriorated by multi-user interference and
narrowband interference. It is necessary to develop advanced signal
processing techniques at the receiver to suppress these interferences.
Part I of this thesis deals with the co-design of signaling schemes and
receiver architectures in low data rate impulse radio UWB systems based on
non-coherent detection.● We analyze the bit error rate performance of
non-coherent detection and characterize a non-coherent combining loss,
i.e., a performance penalty with respect to coherent detection with maximum
ratio multipath combining. The thorough analysis of this loss is very
helpful for the design of transmission schemes and receive techniques
innon-coherent UWB communication systems.● We propose to use optical
orthogonal codes in a time hopping impulse radio UWB system based on an
analog non-coherent receiver. The “analog” means that the major part of
the multipath combining is implemented by an integrate and dump filter. The
introduced semi-analytical method can help us to easily select the time
hopping codes to ensure the robustness against the multi-user interference
and meanwhile to alleviate the non-coherent combining loss.● The main
contribution of Part I is the proposal of applying fully digital solutions
in non-coherent detection. The proposed digital non-coherent receiver is
based on a time domain analog-to-digital converter, which has a high speed
but a very low resolution to maintain a reasonable power consumption.
Compared to its analog counterpart, itnot only significantly reduces the
non-coherent combining loss but also offers a higher interference
robustness. In particular, the one-bit receiver can effectively suppress
strong multi-user interference and is thus advantageous in separating
simultaneously operating piconets.The fully digital solutions overcome the
difficulty of implementing long analog delay lines and make differential
UWB detection possible. They also facilitate the development of various
digital signal processing techniques such as multi-user detection and
non-coherent multipath combining methods as well as the use of advanced
modulationschemes (e.g., M-ary Walsh modulation).● Furthermore, we
present a novel impulse radio UWB system based on frequency hopping, where
both coherent and non-coherent receivers can be adopted. The key advantage
is that the baseband bandwidth can be considerably reduced (e.g., lower
than 500 MHz), which enables low-complexity implementation of the fully
digital solutions. It opens up various research activities in the
application field of wireless sensor networks.
Part II of this thesis proposes adaptive widely linear reduced-rank
techniques to suppress interferences for high data rate direct sequence UWB
systems, where second-order non-circular signals are used. The reduced-rank
techniques are designed to improve the convergence performance and the
interference robustness especially when the received vector contains a
large number of samples (due to a high sampling rate in UWB systems). The
widely linear processing takes full advantage of the second-order
statistics of the non-circular signals and enhances the estimation
performance. The generic widely linear reduced-rank concept also has a
great potential in the applications of other systems such as Direct
Sequence Code Division Multiple Access (DS-CDMA), Multiple Input Multiple
Output (MIMO) system, and Global System for Mobile Communications (GSM), or
in other areas such as beamforming
Analysis of the IEEE 802.15.4a ultra wideband physical layer through wireless sensor network simulations in OMNET++
Wireless Sensor Networks are the main representative of pervasive computing in large-scale physical environments. These networks consist of a large number of small, wireless devices embedded in the physical world to be used for surveillance, environmental monitoring or other data capture, processing and transfer applications. Ultra wideband has emerged as one of the newest and most promising concepts for wireless technology. Considering all its advantages it seems a likely communication technology candidate for future wireless sensor networks. This paper considers the viability of ultra wideband technology in wireless sensor networks by employing an IEEE 802.15.4a low-rate ultra wideband physical layer model in the OMNET++ simulation environment. An elaborate investigation into the inner workings of the IEEE 802.15.4a UWB physical layer is performed. Simulation experiments are used to provide a detailed analysis of the performance of the IEEE 802.15.4a UWB physical layer over several communication distances. A proposal for a cognitive, adaptive communication approach to optimize for speed and distance is also presented. AFRIKAANS : Draadlose Sensor Netwerke is die hoof verteenwoordiger vir deurdringende rekenarisering in groot skaal fisiese omgewings. Hierdie tipe netwerke bestaan uit ’n groot aantal klein, draadlose apparate wat in die fisiese wêreld ingesluit word vir die doel van bewaking, omgewings monitering en vele ander data opvang, verwerk en oordrag applikasies. Ultra wyeband het opgestaan as een van die nuutste en mees belowend konsepte vir draadlose kommunikasie tegnologie. As al die voordele van dié kommunikasie tegnologie in ag geneem word, blyk dit om ’n baie goeie kandidaat te wees vir gebruik in toekomstige draadlose sensor netwerke. Hierdie verhandeling oorweeg die vatbaarheid van die gebruik van die ultra wyeband tegnologie in draadlose sensor netwerke deur ’n IEEE 802.15.4a lae-tempo ultra wyeband fisiese laag model in die OMNET++ simulasie omgewing toe te pas. ’n Breedvoerige ondersoek word geloots om die fyn binneste werking van die IEEE 802.15.4a UWB fisiese laag te verstaan. Simulasie eksperimente word gebruik om ’n meer gedetaileerde analiese omtrent die werkverrigting van die IEEE 802.15.4a UWB fisiese laag te verkry oor verskillende kommunikasie afstande. ’n Voorstel vir ’n omgewings bewuste, aanpasbare kommunikasie tegniek word bespreek met die doel om die spoed en afstand van kommunikasie te optimiseer.Dissertation (MEng)--University of Pretoria, 2011.Electrical, Electronic and Computer Engineeringunrestricte
Experimental Validation and Proof-of-concept of 5G Dense Small Cells Networks in Indoor Environments
A Robust Signal Detection Method for Ultra Wide Band (UWB) Networks with Uncontrolled Interference
We propose a novel detection method for non-coherent synchronization (signal acquisition) in multi-user UWB impulse radio (IR) networks. It is designed to solve the IUI (Inter-User Interference) that occurs in some ad-hoc networks where concurrent transmissions are allowed with heterogeneous power levels. In such scenarios, the conventional detection method, which is based on correlating the received IR signal with a Template Pulse Train (TPT), does not always perform well. The complexity of our proposal is similar to that of the conventional method. We evaluate its performance with the Line Of Sight (LOS) and the Non LOS (NLOS) office indoor channel models proposed by the IEEE P802.15.4a study group and find that the improvement is significant. We also investigate the particular case where the concurrent transmissions have the same time-hopping code, and we show that it does not result in collision, such scenarios appear in ad-hoc networks that employ common code for control or broadcast purposes
Direction of arrival estimation of WiMedia UWB multipath signals in the presence of inband interferers
Ph.DDOCTOR OF PHILOSOPH
- …