WLC22-4: Efficient request mechanism usage in IEEE 802.16

IEEE 802.16 protocols for metropolitan broadband wireless access systems have been standardized recently. According to the standard, a subscriber station can deliver bandwidth request messages to a base station by numerous methods. This paper provides both the simulation and analytical models for the investigation of specified random access method, which is compared with centralized polling and station- grouping mechanisms. Based on the assumptions of Bernoulli request arrival process and ideal channel conditions, the mean delay of a request transmission is evaluated for varying number of transmission opportunities and different arrival rates

New contention resolution schemes for WiMAX

Abstract—The use of Broadband Wireless Access (BWA) technology is increasing due to the use of Internet and multimedia applications with strict requirements of end–to–end delay and jitter, through wireless devices. The IEEE 802.16 standard, which defines the physical (PHY) and the medium access control (MAC) layers, is one of the BWA standards. Its MAC layer is centralized basis, where the Base Station (BS) is responsible for assigning the needed bandwidth for each Subscriber Station (SS), which requests bandwidth competing between all of them. The standard defines a contention resolution process to resolve the potential occurrence of collisions during the requesting process. In this paper, we propose to modify the contention resolution process to improve the network performance, including end–to–end delay and throughput

Efficient Resource Management Mechanism for 802.16 Wireless Networks Based on Weighted Fair Queuing

Wireless Networking continues on its path of being one of the most commonly used means of communication. The evolution of this technology has taken place through the design of various protocols. Some common wireless protocols are the WLAN, 802.16 or WiMAX, and the emerging 802.20, which specializes in high speed vehicular networks, taking the concept from 802.16 to higher levels of performance. As with any large network, congestion becomes an important issue. Congestion gains importance as more hosts join a wireless network. In most cases, congestion is caused by the lack of an efficient mechanism to deal with exponential increases in host devices. This can effectively lead to very huge bottlenecks in the network causing slow sluggish performance, which may eventually reduce the speed of the network. With continuous advancement being the trend in this technology, the proposal of an efficient scheme for wireless resource allocation is an important solution to the problem of congestion. The primary area of focus will be the emerging standard for wireless networks, the 802.16 or “WiMAX”. This project, attempts to propose a mechanism for an effective resource management mechanism between subscriber stations and the corresponding base station

Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks

The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

WiMAX: Performance Analysis and Enhancement of Real-time Bandwidth Request

This paper carried out a study on the bandwidth request for real-time polling services. In our study, we discovered that although the base station granted the subscriber station an allocation to send the bandwidth request, the subscriber station may not be able to allocate the bandwidth request to the allocation. It is due to processing delay and multicast polling in the subscriber station, which results the bandwidth request being padded unintentionally. The loss of bandwidth requests will cause the degradation of the real-time polling service performance. Therefore, we propose a scheme to overcome this problem. The results of the experiment show that the proposed scheme improves the performance of real-time polling services

Bandwidth and Power Management in Broadband Wireless Networks

Bandwidth and power are considered as two important resources in wireless networks. Therefore, how to management these resources becomes a critical issue. In this thesis, we investigate this issue majorally in IEEE 802.16 networks. We first perform performance analysis on two bandwidth request mechanisms defined in IEEE 802.16 networks. We also propose two practical performance objectives. Based on the analysis, we design two scheduling algorithm to achieve the objectives. Due to the characteristics of popular variable bit rate (VBR) traffic, it is very difficult for subscriber stations (SSs) to make appropriate bandwidth reservation. Therefore, the bandwidth may not be utilized all the time. We propose a new protocol, named bandwidth recycling, to utilized unused bandwidth. Our simulation shows that the proposed scheme can improve system utilization averagely by 40\%. We also propose a more aggressive solution to reduce the gap between bandwidth reservation and real usage. We first design a centralized approach by linear programming to obtain the optimal solution. Further, we design a fully distributed scheme based on game theory, named bandwidth reservation (BR) game. Due to different quality of service (QoS) requirements, we customize the utility function for each scheduling class. Our numerical and simulation show that the gap between BR game and optimal solution is limited. Due to the advantage of dynamical fractional frequency reuse (DFFR), the base station (BS) can dynamically adjust transmission power on each frequency partition. We emphasis on power allocation issue in DFFR to achieve most ecomicical data transmission. We first formulate the problem by integer linear programming (ILP). Due to high computation complexity, we further design a greedy algorithm. Our simulation shows that the results of the greedy algorithm is very close to the ILP results

Adjusting WiMAX for a Dedicated Surveillance Network

WiMAX (Worldwide Interoperability for Microwave Access) devices have been used widely in the market. WiMAX-based video surveillance products have also been available. The acceptance of WiMAX in the market, as well as the availability of WiMAX products, contributes to the possibility of implementing it for dedicated video surveillance application. However, since WiMAX is designed to accommodate various applications with different quality of service (QoS) requirements, WiMAX–based dedicated surveillance network may not achieve optimum performance, as all SSs generate the same QoS requirements. The scheduler cannot implement traffic type priority; therefore, service classification does not work as expected. This paper proposes WiMAX adjustment to transform a multi-purpose WiMAX network into a network dedicated to video surveillance. NS-2 simulations show that the proposed adjustment is able to deliver low delay and high quality video surveillance.DOI:http://dx.doi.org/10.11591/ijece.v3i4.318

Design and analysis of MAC protocols for wireless networks

During the last few years, wireless networking has attracted much of the research and industry interest. In addition, almost all current wireless devices are based on the IEEE 802.11 and IEEE 802.16 standards for the local and metropolitan area networks (LAN/MAN) respectively. Both of these standards define the medium access control layer (MAC) and physical layer (PHY) parts of a wireless user. In a wireless network, the MAC protocol plays a significant role in determining the performance of the whole network and individual users. Accordingly, many challenges are addressed by research to improve the performance of MAC operations in IEEE 802.11 and IEEE 802.16 standards. Such performance is measured using different metrics like the throughput, fairness, delay, utilization, and drop rate. We propose new protocols and solutions to enhance the performance of an IEEE 802.11 WLAN (wireless LAN) network, and to enhance the utilization of an IEEE 802.16e WMAN (wireless MAN). First, we propose a new protocol called HDCF (High-performance Distributed Coordination Function), to address the problem of wasted time, or idle slots and collided frames, in contention resolution of the IEEE 802.11 DCF. Second, we propose a simple protocol that enhances the performance of DCF in the existence of the hidden terminal problem. Opposite to other approaches, the proposed protocol attempts to benefit from the hidden terminal problem. Third, we propose two variants of a simple though effective distributed scheme, called NZ-ACK (Non Zero-Acknowledgement), to address the effects of coexisting IEEE 802.11e EDCA and IEEE 802.11 DCF devices. Finally, we investigate encouraging ertPS (enhanced real time Polling Service) connections, in an IEEE 802.16e, network to benefit from contention, and we aim at improving the network performance without violating any delay requirements of voice applications

A Survey on Scheduling in IEEE 802.16 Mesh Mode

Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX) defines the wireless broadband network technology which aims to solve the so called last mile problem via providing high bandwidth Internet even to the rural areas for which the cable deployment is very costly. The standard mainly focuses on the MAC and PHY layer issues, supporting two transmission modes: PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an optional mode developed as an extension to PMP mode and it has the advantage of having an improving performance as more subscribers are added to the system using multi-hop routes. In 802.16 MAC protocol, mesh mode slot allocation and reservation mechanisms are left open which makes this topic a hot research area. Hence, the focus of this survey will mostly be on the mesh mode, and the proposed scheduling algorithms and performance evaluation methods