Survey of Landslide Warning Systems and their Applicability in Mauritius

Landslide is major problem in several countries causing loss of lives and major infrastructural damage. Several systems have been set-up for monitoring and predicting landslides in different countries where this problem is prevalent. These systems integrate sensing mechanism with communication systems and GPS to detect landslide conditions and alert concerned parties via sms, emails and other appropriate means. Wireless sensor networks have also been widely deployed for landslide monitoring. Mauritius which is an island nation situated in the Indian Ocean has recently faced several problems due to extreme climatic conditions such as torrential rains and flash floods that have led to major landslide problems in different parts of the island. However, to date, there is no adequate system in place to monitor landslides. This paper surveys the different landslide modelling and warning systems that have been deployed worldwide and assesses their suitability for Mauritius. Given the excellent mobile network coverage available in Mauritius, a landslide warning system based on sms notifications appears to be a viable solution for Mauritius. A potential framework for a landslide monitoring system for Mauritius is therefore proposed along with a feasibility analysis

Wireless sensor networks for landslide monitoring: application and optimization by visibility analysis on 3D point clouds

Occurring in many geographical, geological and climatic environments, landslides represent a major geological hazard. In landslide prone areas, monitoring devices associated with Early Warning Systems are a cost-effective means to reduce the risk with a low environmental and economic impact, and in some cases, they can be the only solution. In this framework, particular interest has been reserved for Wireless Sensor Networks (WSNs), defined as networks of usually low-size and low-cost devices denoted as nodes, which are integrated with sensors that can gather information through wireless links. In this thesis, data from a new prototypical ground instability monitoring instrument called Wi-GIM (Wireless sensor network for Ground Instability Monitoring) have been analysed. The system consists in a WSN made by nodes able to measure their mutual inter-distances by calculating the time of flight of an Ultra-Wide Band impulse. Therefore, no sensors are implemented in the network, as the same signals used for transmission are also used for ranging. The system has been tested in a controlled outdoor environment and applied for the monitoring of the displacements of an actual landslide, the Roncovetro mudflow in Central Italy, where a parallel monitoring with a Robotic Total Station (RTS) allowed to validate the system. The outputs are displacement time series showing the distance of each couple of nodes belonging to the same cluster. Data retrieved from the tests revealed a precision of 2–5 cm and that measurements are influenced by the temperature. Since the correlation with this parameter has proved to be linear, a simple correction is sufficient to improve the precision and remove the effect of temperature. The campaign also revealed that measurements were not affected by rain or snow, and that the system can efficiently communicate up to 150 m with a 360° angle of view without affecting precision. Other key features of the implemented system are easy and quick installation, flexibility, low cost, real-time monitoring and acquisition frequency changeability. The comparison between Wi-GIM and RTS measurements pointed out the presence of an offset (in an order that vary from centimetric to decametric) constant for each single couple, due mainly to the presence of obstacles that can obstruct the Line Of Sight (LOS). The presence of vegetation is the main cause of the non-LOS condition between two nodes, which translates in a longer path of the signals and therefore to a less accurate distance measurements. To go further inside this issue, several tests have been carried out proving the strong influence of the vegetation over both data quantity and quality. To improve them, a MATLAB tool (R2018a, MAthWorks, Natick, MA, USA) called WiSIO (Wireless Sensor network Installation Optimizer) has been developed. The algorithm finds the best devices deployment following three criteria: (i) inter-visibility by means of a modified version of the Hidden Point Removal operator; (ii) equal distribution; (iii) positioning in preselected priority areas. With respect to the existing viewshed analysis, the main novelty is that it works directly with 3D point clouds, without rendering them or performing any surface. This lead to skip the process of generating surface models avoiding errors and approximations, that is essential when dealing with vegetation. A second installation of the Wi-GIM system has been therefore carried out considering the deployment suggested by WiSIO. The comparison of data acquired by the system positioned with and without the help of the proposed algorithm allowed to better comprehend the effectiveness of the tool. The presented results are very promising, showing how a simple elaboration can be essential to have more and more reliable data, improving the Wi-GIM system performances, making it even more usable in very complex environments and increasing its flexibility. The main left limitation of the Wi-GIM system is currently the precision. Such issue is connected to the aim of using only low-cost components, and it can be prospectively overcome if the system undergoes an industrialization process. Furthermore, since the system architecture is re-adaptable, it is prone to enhancements as soon as the technology advances and new low cost hardware enters the market

An approach of differential capacitor sensor for landslide monitoring

A lot of lives and properties are lost in every year all over the world, due to various geological catastrophes, landslide or land - slip is among one of them. Nowadays, both manual and electronic monitoring systems ar e used to predic t the landslide . The manual monitoring system is laborious, has many limitations and most of the cases it is not practicable. Conversely, most of the electronic systems are complex and expensive. Most of the natural calamities occur without prior notice as a result, it damages the monitoring instrument as well. The monitoring sensor system should be planned as a spread network with a simple positional identification device such as RFID; hence the system can send the real time data without interrupt. In addi tion, the network should have a self - recovery, self - directed operation and actual data transmission facility in a critical situation. A distributed node network needs a lot of sensors with complex structure and it is expensive too. This paper describes a s imple and low cost system which comprises an underground pretension cable with a capacitor gauge sensor attached at one end. A wireless sensor network has been proposed for a simple landslide monitoring system using RFID. The sensing node network can opera te by initializing mode, measuring mode and urgent mode. The system is able to select automatically any one of the operating mode depending on the situation , which makes it a robust and dynamic control of real time data transmission system. A mathematical model has been developed for the system and verified by simulation. The result shows that an early prediction of the landslide is possible by using the proposed system

Recent Advances in Internet of Things Solutions for Early Warning Systems: A Review

none5noNatural disasters cause enormous damage and losses every year, both economic and in terms of human lives. It is essential to develop systems to predict disasters and to generate and disseminate timely warnings. Recently, technologies such as the Internet of Things solutions have been integrated into alert systems to provide an effective method to gather environmental data and produce alerts. This work reviews the literature regarding Internet of Things solutions in the field of Early Warning for different natural disasters: floods, earthquakes, tsunamis, and landslides. The aim of the paper is to describe the adopted IoT architectures, define the constraints and the requirements of an Early Warning system, and systematically determine which are the most used solutions in the four use cases examined. This review also highlights the main gaps in literature and provides suggestions to satisfy the requirements for each use case based on the articles and solutions reviewed, particularly stressing the advantages of integrating a Fog/Edge layer in the developed IoT architectures.openEsposito M.; Palma L.; Belli A.; Sabbatini L.; Pierleoni P.Esposito, M.; Palma, L.; Belli, A.; Sabbatini, L.; Pierleoni, P

Wireless Sensor Technologies and Applications

Recent years have witnessed tremendous advances in the design and applications of wirelessly networked and embedded sensors. Wireless sensor nodes are typically low-cost, low-power, small devices equipped with limited sensing, data processing and wireless communication capabilities, as well as power supplies. They leverage the concept of wireless sensor networks (WSNs), in which a large (possibly huge) number of collaborative sensor nodes could be deployed. As an outcome of the convergence of micro-electro-mechanical systems (MEMS) technology, wireless communications, and digital electronics, WSNs represent a significant improvement over traditional sensors. In fact, the rapid evolution of WSN technology has accelerated the development and deployment of various novel types of wireless sensors, e.g., multimedia sensors. Fulfilling Moore’s law, wireless sensors are becoming smaller and cheaper, and at the same time more powerful and ubiquitous. [...

Developing an Efficient DMCIS with Next-Generation Wireless Networks

The impact of extreme events across the globe is extraordinary which continues to handicap the advancement of the struggling developing societies and threatens most of the industrialized countries in the globe. Various fields of Information and Communication Technology have widely been used for efficient disaster management; but only to a limited extent though, there is a tremendous potential for increasing efficiency and effectiveness in coping with disasters with the utilization of emerging wireless network technologies. Early warning, response to the particular situation and proper recovery are among the main focuses of an efficient disaster management system today. Considering these aspects, in this paper we propose a framework for developing an efficient Disaster Management Communications and Information System (DMCIS) which is basically benefited by the exploitation of the emerging wireless network technologies combined with other networking and data processing technologies.Comment: 6 page

A Secure Lightweight Approach of Node Membership Verification in Dense HDSN

In this paper, we consider a particular type of deployment scenario of a distributed sensor network (DSN), where sensors of different types and categories are densely deployed in the same target area. In this network, the sensors are associated with different groups, based on their functional types and after deployment they collaborate with one another in the same group for doing any assigned task for that particular group. We term this sort of DSN as a heterogeneous distributed sensor network (HDSN). Considering this scenario, we propose a secure membership verification mechanism using one-way accumulator (OWA) which ensures that, before collaborating for a particular task, any pair of nodes in the same deployment group can verify each other-s legitimacy of membership. Our scheme also supports addition and deletion of members (nodes) in a particular group in the HDSN. Our analysis shows that, the proposed scheme could work well in conjunction with other security mechanisms for sensor networks and is very effective to resist any adversary-s attempt to be included in a legitimate group in the network.Comment: 6 page