Fast and accurate SER estimation for large combinational blocks in early stages of the design

Soft Error Rate (SER) estimation is an important challenge for integrated circuits because of the increased vulnerability brought by technology scaling. This paper presents a methodology to estimate in early stages of the design the susceptibility of combinational circuits to particle strikes. In the core of the framework lies MASkIt , a novel approach that combines signal probabilities with technology characterization to swiftly compute the logical, electrical, and timing masking effects of the circuit under study taking into account all input combinations and pulse widths at once. Signal probabilities are estimated applying a new hybrid approach that integrates heuristics along with selective simulation of reconvergent subnetworks. The experimental results validate our proposed technique, showing a speedup of two orders of magnitude in comparison with traditional fault injection estimation with an average estimation error of 5 percent. Finally, we analyze the vulnerability of the Decoder, Scheduler, ALU, and FPU of an out-of-order, superscalar processor design.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness and Feder Funds under grant TIN2013-44375-R, by the Generalitat de Catalunya under grant FI-DGR 2016, and by the FP7 program of the EU under contract FP7-611404 (CLERECO).Peer ReviewedPostprint (author's final draft

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Analysis of Hardware Descriptions

The design process for integrated circuits requires a lot of analysis of circuit descriptions. An important class of analyses determines how easy it will be to determine if a physical component suffers from any manufacturing errors. As circuit complexities grow rapidly, the problem of testing circuits also becomes increasingly difficult. This thesis explores the potential for analysing a recent high level hardware description language called Ruby. In particular, we are interested in performing testability analyses of Ruby circuit descriptions. Ruby is ammenable to algebraic manipulation, so we have sought transformations that improve testability while preserving behaviour. The analysis of Ruby descriptions is performed by adapting a technique called abstract interpretation. This has been used successfully to analyse functional programs. This technique is most applicable where the analysis to be captured operates over structures isomorphic to the structure of the circuit. Many digital systems analysis tools require the circuit description to be given in some special form. This can lead to inconsistency between representations, and involves additional work converting between representations. We propose using the original description medium, in this case Ruby, for performing analyses. A related technique, called non-standard interpretation, is shown to be very useful for capturing many circuit analyses. An implementation of a system that performs non-standard interpretation forms the central part of the work. This allows Ruby descriptions to be analysed using alternative interpretations such test pattern generation and circuit layout interpretations. This system follows a similar approach to Boute's system semantics work and O'Donnell's work on Hydra. However, we have allowed a larger class of interpretations to be captured and offer a richer description language. The implementation presented here is constructed to allow a large degree of code sharing between different analyses. Several analyses have been implemented including simulation, test pattern generation and circuit layout. Non-standard interpretation provides a good framework for implementing these analyses. A general model for making non-standard interpretations is presented. Combining forms that combine two interpretations to produce a new interpretation are also introduced. This allows complex circuit analyses to be decomposed in a modular manner into smaller circuit analyses which can be built independently

Reliability-energy-performance optimisation in combinational circuits in presence of soft errors

PhD ThesisThe reliability metric has a direct relationship to the amount of value produced by a circuit, similar to the performance metric. With advances in CMOS technology, digital circuits become increasingly more susceptible to soft errors. Therefore, it is imperative to be able to assess and improve the level of reliability of these circuits. A framework for evaluating and improving the reliability of combinational circuits is proposed, and an interplay between the metrics of reliability, energy and performance is explored. Reliability evaluation is divided into two levels of characterisation: stochastic fault model (SFM) of the component library and a design-specific critical vector model (CVM). The SFM captures the properties of components with regard to the interference which causes error. The CVM is derived from a limited number of simulation runs on the specific design at the design time and producing the reliability metric. The idea is to move the high-complexity problem of the stochastic characterisation of components to the generic part of the design process, and to do it just once for a large number of specific designs. The method is demonstrated on a range of circuits with various structures. A three-way trade-off between reliability, energy, and performance has been discovered; this trade-off facilitates optimisations of circuits and their operating conditions. A technique for improving the reliability of a circuit is proposed, based on adding a slow stage at the primary output. Slow stages have the ability to absorb narrow glitches from prior stages, thus reducing the error probability. Such stages, or filters, suppress most of the glitches generated in prior stages and prevent them from arriving at the primary output of the circuit. Two filter solutions have been developed and analysed. The results show a dramatic improvement in reliability at the expense of minor performance and energy penalties. To alleviate the problem of the time-consuming analogue simulations involved in the proposed method, a simplification technique is proposed. This technique exploits the equivalence between the properties of the gates within a path and the equivalence between paths. On the basis of these equivalences, it is possible to reduce the number of simulation runs. The effectiveness of the proposed technique is evaluated by applying it to different circuits with a representative variety of path topologies. The results show a significant decrease in the time taken to estimate reliability at the expense of a minor decrease in the accuracy of estimation. The simplification technique enables the use of the proposed method in applications with complex circuits.Ministry of Education and Scientific Research in Liby

Quality and Quantity in Robustness-Checking Using Formal Techniques

Fault tolerance is one of the main challenges for future technology scaling to tolerate transient faults. Various techniques at design level are available to catch and handle transient faults, e.g., Triple Modular Redundancy. An important but missing step is to verify the implementation of those techniques since the implementation might be buggy itself. The thesis is focusing on formally verifying digital circuits with respect to fault-tolerant aspects. It considers transient faults and basically checks whether these faults can influence the output behavior of sequential circuits for any kind of scenarios. As a result the designer is pin-pointed directly to critical parts of the design and gets a prove about the absence of faulty behavior for non-critical parts. The focus of the verification is completeness with respect to the analysis. Three issues need to be adequately addressed: 1) cover all input stimuli, 2) all possible transient faults, and, 3) all possibly exponential long (wrt. to number of state bits) propagation paths. All three issues are addressed in different engines. A tool called RobuCheck has been implemented and evaluated on different academic benchmarks from ITC'99 and industrial benchmarks from IBM

Cross-layer Soft Error Analysis and Mitigation at Nanoscale Technologies

This thesis addresses the challenge of soft error modeling and mitigation in nansoscale technology nodes and pushes the state-of-the-art forward by proposing novel modeling, analyze and mitigation techniques. The proposed soft error sensitivity analysis platform accurately models both error generation and propagation starting from a technology dependent device level simulations all the way to workload dependent application level analysis

ASSESSING AND IMPROVING THE RELIABILITY AND SECURITY OF CIRCUITS AFFECTED BY NATURAL AND INTENTIONAL FAULTS

The reliability and security vulnerability of modern electronic systems have emerged as concerns due to the increasing natural and intentional interferences. Radiation of high-energy charged particles generated from space environment or packaging materials on the substrate of integrated circuits results in natural faults. As the technology scales down, factors such as critical charge, voltage supply, and frequency change tremendously that increase the sensitivity of integrated circuits to natural faults even for systems operating at sea level. An attacker is able to simulate the impact of natural faults and compromise the circuit or cause denial of service. Therefore, instead of utilizing different approaches to counteract the effect of natural and intentional faults, a unified countermeasure is introduced. The unified countermeasure thwarts the impact of both reliability and security threats without paying the price of more area overhead, power consumption, and required time. This thesis first proposes a systematic analysis method to assess the probability of natural faults propagating the circuit and eventually being latched. The second part of this work focuses on the methods to thwart the impact of intentional faults in cryptosystems. We exploit a power-based side-channel analysis method to analyze the effect of the existing fault detection methods for natural faults on fault attack. Countermeasures for different security threats on cryptosystems are investigated separately. Furthermore, a new micro-architecture is proposed to thwart the combination of fault attacks and side-channel attacks, reducing the fault bypass rate and slowing down the key retrieval speed. The third contribution of this thesis is a unified countermeasure to thwart the impact of both natural faults and attacks. The unified countermeasure utilizes dynamically alternated multiple generator polynomials for the cyclic redundancy check (CRC) codec to resist the reverse engineering attack

Synthesis and Optimization of Reversible Circuits - A Survey

Reversible logic circuits have been historically motivated by theoretical research in low-power electronics as well as practical improvement of bit-manipulation transforms in cryptography and computer graphics. Recently, reversible circuits have attracted interest as components of quantum algorithms, as well as in photonic and nano-computing technologies where some switching devices offer no signal gain. Research in generating reversible logic distinguishes between circuit synthesis, post-synthesis optimization, and technology mapping. In this survey, we review algorithmic paradigms --- search-based, cycle-based, transformation-based, and BDD-based --- as well as specific algorithms for reversible synthesis, both exact and heuristic. We conclude the survey by outlining key open challenges in synthesis of reversible and quantum logic, as well as most common misconceptions.Comment: 34 pages, 15 figures, 2 table