Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Optimising and evaluating designs for reconfigurable hardware

Growing demand for computational performance, and the rising cost for chip design and manufacturing make reconfigurable hardware increasingly attractive for digital system implementation. Reconfigurable hardware, such as field-programmable gate arrays (FPGAs), can deliver performance through parallelism while also providing flexibility to enable application builders to reconfigure them. However, reconfigurable systems, particularly those involving run-time reconfiguration, are often developed in an ad-hoc manner. Such an approach usually results in low designer productivity and can lead to inefficient designs. This thesis covers three main achievements that address this situation. The first achievement is a model that captures design parameters of reconfigurable hardware and performance parameters of a given application domain. This model supports optimisations for several design metrics such as performance, area, and power consumption. The second achievement is a technique that enhances the relocatability of bitstreams for reconfigurable devices, taking into account heterogeneous resources. This method increases the flexibility of modules represented by these bitstreams while reducing configuration storage size and design compilation time. The third achievement is a technique to characterise the power consumption of FPGAs in different activity modes. This technique includes the evaluation of standby power and dedicated low-power modes, which are crucial in meeting the requirements for battery-based mobile devices

Optimizing communication and capacity in a 3D stacked reconfigurable cache hierarchy

Journal ArticleCache hierarchies in future many-core processors are expected to grow in size and contribute a large fraction of overall processor power and performance. In this paper, we postulate a 3D chip design that stacks SRAM and DRAM upon processing cores and employs OS-based page coloring to minimize horizontal communication of cache data. We then propose a heterogeneous reconfigurable cache design that takes advantage of the high density of DRAM and the superior power/delay characteristics of SRAM to efficiently meet the working set demands of each individual core. Finally, we analyze the communication patterns for such a processor and show that a tree topology is an ideal fit that significantly reduces the power and latency requirements of the on-chip network. The above proposals are synergistic: each proposal is made more compelling because of its combination with the other innovations described in this paper. The proposed reconfigurable cache model improves performance by up to 19% along with 48% savings in network power

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

FPGA-Based Acceleration of the Self-Organizing Map (SOM) Algorithm using High-Level Synthesis

One of the fastest growing and the most demanding areas of computer science is Machine Learning (ML). Self-Organizing Map (SOM), categorized as unsupervised ML, is a popular data-mining algorithm widely used in Artificial Neural Network (ANN) for mapping high dimensional data into low dimensional feature maps. SOM, being computationally intensive, requires high computational time and power when dealing with large datasets. Acceleration of many computationally intensive algorithms can be achieved using Field-Programmable Gate Arrays (FPGAs) but it requires extensive hardware knowledge and longer development time when employing traditional Hardware Description Language (HDL) based design methodology. Open Computing Language (OpenCL) is a standard framework for writing parallel computing programs that execute on heterogeneous computing systems. Intel FPGA Software Development Kit for OpenCL (IFSO) is a High-Level Synthesis (HLS) tool that provides a more efficient alternative to HDL-based design. This research presents an optimized OpenCL implementation of SOM algorithm on Stratix V and Arria 10 FPGAs using IFSO. Compared to recent SOM implementations on Central Processing Unit (CPU) and Graphics Processing Unit (GPU), our OpenCL implementation on FPGAs provides superior speed performance and power consumption results. Stratix V achieves speedup of 1.41x - 16.55x compared to AMD and Intel CPU and 2.18x compared to Nvidia GPU whereas Arria 10 achieves speedup of 1.63x - 19.15x compared to AMD and Intel CPU and 2.52x compared to Nvidia GPU. In terms of power consumption, Stratix V is 35.53x and 42.53x whereas Arria 10 is 15.82x and 15.93x more power efficient compared to CPU and GPU respectively

Management and control of complexity in clustering for value creation in sustainable societies

The global production challenges we face need to be addressed in the multifaceted context of sustainability. Startup enterprises need to be both creative and innovative in order to survive and realize growth. Production clusters are usually formed as a result of common geographical location and/or similar economic activity. Clustering can support distributed manufacturing incubators to overcome social, economic and technological challenges through sharing resources. As these clusters must contribute socio-economically to its community, without compromising the ability of future generations to meet their own needs, complex systems exist. The aim of this paper is to encourage ourselves to direct our research towards concepts which reduce production complexity and support simplicity. This research evaluates several production clusters toward sustainable value creation in developing communities. Key elements of a clustered based growth framework are identified to support manufacturing incubators in South Africa