SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization

Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field

FPGA-based architectures for acoustic beamforming with microphone arrays : trends, challenges and research opportunities

Over the past decades, many systems composed of arrays of microphones have been developed to satisfy the quality demanded by acoustic applications. Such microphone arrays are sound acquisition systems composed of multiple microphones used to sample the sound field with spatial diversity. The relatively recent adoption of Field-Programmable Gate Arrays (FPGAs) to manage the audio data samples and to perform the signal processing operations such as filtering or beamforming has lead to customizable architectures able to satisfy the most demanding computational, power or performance acoustic applications. The presented work provides an overview of the current FPGA-based architectures and how FPGAs are exploited for different acoustic applications. Current trends on the use of this technology, pending challenges and open research opportunities on the use of FPGAs for acoustic applications using microphone arrays are presented and discussed

CABE : a cloud-based acoustic beamforming emulator for FPGA-based sound source localization

Microphone arrays are gaining in popularity thanks to the availability of low-cost microphones. Applications including sonar, binaural hearing aid devices, acoustic indoor localization techniques and speech recognition are proposed by several research groups and companies. In most of the available implementations, the microphones utilized are assumed to offer an ideal response in a given frequency domain. Several toolboxes and software can be used to obtain a theoretical response of a microphone array with a given beamforming algorithm. However, a tool facilitating the design of a microphone array taking into account the non-ideal characteristics could not be found. Moreover, generating packages facilitating the implementation on Field Programmable Gate Arrays has, to our knowledge, not been carried out yet. Visualizing the responses in 2D and 3D also poses an engineering challenge. To alleviate these shortcomings, a scalable Cloud-based Acoustic Beamforming Emulator (CABE) is proposed. The non-ideal characteristics of microphones are considered during the computations and results are validated with acoustic data captured from microphones. It is also possible to generate hardware description language packages containing delay tables facilitating the implementation of Delay-and-Sum beamformers in embedded hardware. Truncation error analysis can also be carried out for fixed-point signal processing. The effects of disabling a given group of microphones within the microphone array can also be calculated. Results and packages can be visualized with a dedicated client application. Users can create and configure several parameters of an emulation, including sound source placement, the shape of the microphone array and the required signal processing flow. Depending on the user configuration, 2D and 3D graphs showing the beamforming results, waterfall diagrams and performance metrics can be generated by the client application. The emulations are also validated with captured data from existing microphone arrays.</jats:p

A Novel Frequency Based Current-to-Digital Converter with Programmable Dynamic Range

This work describes a novel frequency based Current to Digital converter, which would be fully realizable on a single chip. Biological systems make use of delay line techniques to compute many things critical to the life of an animal. Seeking to build up such a system, we are adapting the auditory localization circuit found in barn owls to detect and compute the magnitude of an input current. The increasing drive to produce ultra low-power circuits necessitates the use of very small currents. Frequently these currents need to accurately measured, but current solutions typically involve off-chip measurements. These are usually slow, and moving a current off chip increases noise to the system. Moving a system such as this completely on chip will allow for precise measurement and control of bias currents, and it will allow for better compensation of some common transistor mismatch issues. This project affords an extremely low power (100s nW) converter technology that is also very space efficient. The converter is completely asynchronous which yields ultra-low power standby operation [1]

Microphone array for speaker localization and identification in shared autonomous vehicles

With the current technological transformation in the automotive industry, autonomous vehicles are getting closer to the Society of Automative Engineers (SAE) automation level 5. This level corresponds to the full vehicle automation, where the driving system autonomously monitors and navigates the environment. With SAE-level 5, the concept of a Shared Autonomous Vehicle (SAV) will soon become a reality and mainstream. The main purpose of an SAV is to allow unrelated passengers to share an autonomous vehicle without a driver/moderator inside the shared space. However, to ensure their safety and well-being until they reach their final destination, active monitoring of all passengers is required. In this context, this article presents a microphone-based sensor system that is able to localize sound events inside an SAV. The solution is composed of a Micro-Electro-Mechanical System (MEMS) microphone array with a circular geometry connected to an embedded processing platform that resorts to Field-Programmable Gate Array (FPGA) technology to successfully process in the hardware the sound localization algorithms.This work is supported by: European Structural and Investment Funds in the FEDER component, through the Operational Competitiveness and Internationalization Programme (COMPETE 2020) [Project nº 039334; Funding Reference: POCI-01-0247-FEDER-039334]

Design exploration and performance strategies towards power-efficient FPGA-based achitectures for sound source localization

Many applications rely on MEMS microphone arrays for locating sound sources prior to their execution. Those applications not only are executed under real-time constraints but also are often embedded on low-power devices. These environments become challenging when increasing the number of microphones or requiring dynamic responses. Field-Programmable Gate Arrays (FPGAs) are usually chosen due to their flexibility and computational power. This work intends to guide the design of reconfigurable acoustic beamforming architectures, which are not only able to accurately determine the sound Direction-Of-Arrival (DoA) but also capable to satisfy the most demanding applications in terms of power efficiency. Design considerations of the required operations performing the sound location are discussed and analysed in order to facilitate the elaboration of reconfigurable acoustic beamforming architectures. Performance strategies are proposed and evaluated based on the characteristics of the presented architecture. This power-efficient architecture is compared to a different architecture prioritizing performance in order to reveal the unavoidable design trade-offs

Pyramic array: An FPGA based platform for many-channel audio acquisition

Array processing of audio data has many interesting applications: acoustic beamforming, source separation, indoor localization, room geometry estimation, etc. Recent advances in MEMS has produced tiny microphones, analog or even with digital converter integrated. This opens the door to create arrays with a massive number of microphones. We dub such an array many-channel by analogy to many-core processors.Microphone arrays techniques present compelling applications for robotic implementations. Those techniques can allow robots to listen to their environment and infer clues from it. Such features might enable capabilities such as natural interaction with humans, interpreting spoken commands or the localization of victims during search and rescue tasks. However, under noisy conditions robotic implementations of microphone arrays might degrade their precision when localizing sound sources. For practical applications, human hearing still leaves behind microphone arrays. Daniel Kisch is an example of how humans are able to efficiently perform echo-localization to recognize their environment, even in noisy and reverberant environments. For ubiquitous computing, another limitation of acoustic localization algorithms is within their capabilities of performing real-time Digital Signal Processing (DSP) operations. To tackle those problems, tradeoffs between size, weight, cost and power consumption compromise the design of acoustic sensors for practical applications. This work presents the design and operation of a large microphone array for DSP applications in realistic environments. To address those problems this project introduces the Pyramic sound capture system designed at LAP in EPFL. Pyramic is a custom hardware which possesses 48 microphones dis- tributed in the edges of a tetrahedron. The microphone arrays interact with a Terasic DE1-SoC board from Altera Cyclone V family devices, which combines a Hard Processor System (HPS) and a Field Programmable Gate Array (FPGA) in the same die. The HPS part integrates a dual- core ARM-based Cortex-A9 processor, which combined with the power of FPGA design suitable for processing multichannel microphone signals. This thesis explains the implementation of the Pyramic array. Moreover, FPGA-based hardware accelerators have been designed to imple- ment a Master SPI communication with the array and a parallel 48 channels FIR filters cascade of the audio data for delay-and-sum beamforming applications. Additionally, the configura- tion of the HPS part allows the Pyramic array to be controlled through a Linux based OS. The main purpose of the project is to develop a flexible platform in which real-time echo-location algorithms can be implemented. The effectiveness of the Pyramic array design is illustrated by testing the recorded data with offline direction of arrival algorithms developed at LCAV in EPFL

A multimode SoC FPGA-based acoustic camera for wireless sensor networks

Acoustic cameras allow the visualization of sound sources using microphone arrays and beamforming techniques. The required computational power increases with the number of microphones in the array, the acoustic images resolution, and in particular, when targeting real-time. Such computational demand leads to a prohibitive power consumption for Wireless Sensor Networks (WSNs). In this paper, we present a SoC FPGA based architecture to perform a low-power and real-time accurate acoustic imaging for WSNs. The high computational demand is satisfied by performing the acoustic acquisition and the beamforming technique on the FPGA side. The hard-core processor enhances and compresses the acoustic images before transmitting to the WSN. As a result, the WSN manages the supported configuration modes of the acoustic camera. For instance, the resolution of the acoustic images can be adapted on-demand to satisfy the available network's BW while performing real-time acoustic imaging. Our performance measurements show that acoustic images are generated on the FPGA in real time with resolutions of 160x120 pixels operating at 32 frames-per-second. Nevertheless, higher resolutions are achievable thanks to the exploitation of the hard-core processor available in SoC FPGAs such as Zynq

Sound Localization using VHDL

Sound localization based on listener's potential to address the location or source of a located sound in orientation and distance. Rather than detecting what has been spoken, the work concerns about the detection of where the sound comes from. Speech enhancement aims to improve speech quality by using various algorithms. The purpose of enhancement is to increase user-friendliness and overall excellence of degraded speech signal using audio signal filtering techniques. The better speech quality improves by sign-error LMS algorithm. FPGAs have become a competitive alternative for high performance DSP applications, previously dominated by general purpose DSP and ASIC devices. The FPGA is useful for many multimedia applications and functional systems. The FPGA can be programmed to perform any number of parallel paths