A Real-Time Communication Framework for Wireless Sensor Networks

Recent advances in miniaturization and low power design have led to a flurry of activity in wireless sensor networks. Sensor networks have different constraints than traditional wired networks. A wireless sensor network is a special network with large numbers of nodes equipped with embedded processors, sensors, and radios. These nodes collaborate to accomplish a common task such as environment monitoring or asset tracking. In many applications, sensor nodes will be deployed in an ad-hoc fashion without careful planning. They must organize themselves to form a multihop, wireless communication network. In sensor network environments, much research has been conducted in areas such as power consumption, self-organisation techniques, routing between the sensors, and the communication between the sensor and the sink. On the other hand, real-time communication with the Quality of Service (QoS) concept in wireless sensor networks is still an open research field. Most protocols either ignore real time or simply attempt to process as fast as possible and hope that this speed is sufficient to meet the deadline. However, the introduction of real-time communication has created additional challenges in this area. The sensor node spends most of its life routing packets from one node to another until the packet reaches the sink; therefore, the node functions as a small router most of the time. Since sensor networks deal with time-critical applications, it is often necessary for communication to meet real time constraints. However, research that deals with providing QoS guarantees for real-time traffic in sensor networks is still in its infancy.This thesis presents a real-time communication framework to provide quality of service in sensor networks environments. The proposed framework consists of four components: First, present an analytical model for implementing Priority Queuing (PQ) in a sensor node to calculate the queuing delay. The exact packet delay for corresponding classes is calculated. Further, the analytical results are validated through an extensive simulation study. Second, report on a novel analytical model based on a limited service polling discipline. The model is based on an M/D/1 queuing system (a special class of M/G/1 queuing systems), which takes into account two different classes of traffic in a sensor node. The proposed model implements two queues in a sensor node that are served in a round robin fashion. The exact queuing delay in a sensor node for corresponding classes is calculated. Then, the analytical results are validated through an extensive simulation study. Third, exhibit a novel packet delivery mechanism, namely the Multiple Level Stateless Protocol (MLSP), as a real-time protocol for sensor networks to guarantee the traffic in wireless sensor networks. MLSP improves the packet loss rate and the handling of holes in sensor network much better than its counterpart, MMSPEED. It also introduces the k-limited polling model for the first time. In addition, the whole sending packets dropped significantly compared to MMSPEED, which it leads to decrease the consumption power. Fourth, explain a new framework for moving data from the sink to the user, at a low cost and low power, using the Universal Mobile Telecommunication System (UMTS), which is standard for the Third Generation Mobile System (3G). The integration of sensor networks with the 3G mobile network infrastructure will reduce the cost of building new infrastructures and enable the large-scale deployment of sensor network

Real-Time QoS Routing Protocols in Wireless Multimedia Sensor Networks: Study and Analysis

Many routing protocols have been proposed for wireless sensor networks. These routing protocols are almost always based on energy efficiency. However, recent advances in complementary metal-oxide semiconductor (CMOS) cameras and small microphones have led to the development of Wireless Multimedia Sensor Networks (WMSN) as a class of wireless sensor networks which pose additional challenges. The transmission of imaging and video data needs routing protocols with both energy efficiency and Quality of Service (QoS) characteristics in order to guarantee the efficient use of the sensor nodes and effective access to the collected data. Also, with integration of real time applications in Wireless Senor Networks (WSNs), the use of QoS routing protocols is not only becoming a significant topic, but is also gaining the attention of researchers. In designing an efficient QoS routing protocol, the reliability and guarantee of end-to-end delay are critical events while conserving energy. Thus, considerable research has been focused on designing energy efficient and robust QoS routing protocols. In this paper, we present a state of the art research work based on real-time QoS routing protocols for WMSNs that have already been proposed. This paper categorizes the real-time QoS routing protocols into probabilistic and deterministic protocols. In addition, both categories are classified into soft and hard real time protocols by highlighting the QoS issues including the limitations and features of each protocol. Furthermore, we have compared the performance of mobility-aware query based real-time QoS routing protocols from each category using Network Simulator-2 (NS2). This paper also focuses on the design challenges and future research directions as well as highlights the characteristics of each QoS routing protocol.https://doi.org/10.3390/s15092220

Modelling the Integrated QoS for Wireless Sensor Networks with Heterogeneous Data Traffic

The future of Internet of Things (IoT) is envisaged to consist of a high amount of wireless resource-constrained devices connected to the Internet. Moreover, a lot of novel real-world services offered by IoT devices are realized by wireless sensor networks (WSNs). Integrating WSN to the Internet has therefore brought forward the requirements of an end-to-end quality of service (QoS) guarantee. In this paper, the QoS requirements for the WSN-Internet integration are investigated by first distinguishing the Internet QoS from the WSN QoS. Next, this study emphasizes on WSN applications that involve traffic with different levels of importance, thus the way realtime traffic and delay-tolerant traffic are handled to guarantee QoS in the network is studied. Additionally, an overview of the integration strategies is given, and the delay-tolerant network (DTN) gateway, being one of the desirable approaches for integrating WSNs to the Internet, is discussed. Next, the implementation of the service model is presented, by considering both traffic prioritization and service differentiation. Based on the simulation results in OPNET Modeler, it is observed that real-time traffic achieve low bound delay while delay-tolerant traffic experience a lower packet dropped, hence indicating that the needs of real-time and delay-tolerant traffic can be better met by treating both packet types differently. Furthermore, a vehicular network is used as an example case to describe the applicability of the framework in a real IoT application environment, followed by a discussion on the future work of this research

EEQRP-Energy Efficient Quality Routing Protocol for Wireless Sensor Networks

Emerging technology of research is increasing requirement for a real-time application in Wireless Sensor Networks (WSNs) has made the quality based communication protocols an interesting and hot research topic.  Satisfying quality requirements for the different quality based applications of WSNs raises significant challenges.  More precisely, the networking protocols need to cope up with energy constraints, while providing precise quality guarantee.  Therefore, enabling quality applications in sensor networks requires energy and quality awareness in different layers of the protocol stack.  In many of these applications, the network traffic is mixed of delay sensitive and delay tolerant traffic. Hence, Quality of Service (QoS) routing becomes an important issue.  The main objective of this idea is to develop the path for quality of network and to further improve throughput, routing overhead and bandwidth and at the same time to create energy enhanced way with excellent QoS.  In this research paper, the propose model an Energy Efficient Quality Routing Protocol (EEQRP) technique based on energy efficient protocol that can be used to design fast, tiny, more energetic and efficient way then existing routing protocols, they evaluate and compare the performance of our routing protocol (EEQRP).  Network Simulator (NS2) is used to carry out and test the proposed system achieves lower average delay, more energy savings, and higher packet delivery ratio than the existing protocol

Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks

This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN applications having different types of data traffic with several priorities. The protocol achieves to increase Packet Reception Ratio (PRR) and reduce end-to-end delay while considering multi-queue priority policy, two-hop neighborhood information, link reliability and power efficiency. The protocol is modular and utilizes effective methods for estimating the link metrics. Numerical results show that the proposed protocol is a feasible solution to addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page

Real-life performance of protocol combinations for wireless sensor networks

Wireless sensor networks today are used for many and diverse applications like nature monitoring, or process and wireless building automation. However, due to the limited access to large testbeds and the lack of benchmarking standards, the real-life evaluation of network protocols and their combinations remains mostly unaddressed in current literature. To shed further light upon this matter, this paper presents a thorough experimental performance analysis of six protocol combinations for TinyOS. During these protocol assessments, our research showed that the real-life performance often differs substantially from the expectations. Moreover, we found that combining protocols is far from trivial, as individual network protocols may perform very different in combination with other protocols. The results of our research emphasize the necessity of a flexible generic benchmarking framework, powerful enough to evaluate and compare network protocols and their combinations in different use cases

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Supporting protocol-independent adaptive QoS in wireless sensor networks

Next-generation wireless sensor networks will be used for many diverse applications in time-varying network/environment conditions and on heterogeneous sensor nodes. Although Quality of Service (QoS) has been ignored for a long time in the research on wireless sensor networks, it becomes inevitably important when we want to deliver an adequate service with minimal efforts under challenging network conditions. Until now, there exist no general-purpose QoS architectures for wireless sensor networks and the main QoS efforts were done in terms of individual protocol optimizations. In this paper we present a novel layerless QoS architecture that supports protocol-independent QoS and that can adapt itself to time-varying application, network and node conditions. We have implemented this QoS architecture in TinyOS on TmoteSky sensor nodes and we have shown that the system is able to support protocol-independent QoS in a real life office environment

Time Segmentation Approach Allowing QoS and Energy Saving for Wireless Sensor Networks

Wireless sensor networks are conceived to monitor a certain application or physical phenomena and are supposed to function for several years without any human intervention for maintenance. Thus, the main issue in sensor networks is often to extend the lifetime of the network by reducing energy consumption. On the other hand, some applications have high priority traffic that needs to be transferred within a bounded end-to-end delay while maintaining an energy efficient behavior. We propose MaCARI, a time segmentation protocol that saves energy, improves the overall performance of the network and enables quality of service in terms of guaranteed access to the medium and end-to-end delays. This time segmentation is achieved by synchronizing the activity of nodes using a tree-based beacon propagation and allocating activity periods for each cluster of nodes. The tree-based topology is inspired from the cluster-tree proposed by the ZigBee standard. The efficiency of our protocol is proven analytically, by simulation and through real testbed measurements