Energy-Aware Data Movement In Non-Volatile Memory Hierarchies

While technology scaling enables increased density for memory cells, the intrinsic high leakage power of conventional CMOS technology and the demand for reduced energy consumption inspires the use of emerging technology alternatives such as eDRAM and Non-Volatile Memory (NVM) including STT-MRAM, PCM, and RRAM. The utilization of emerging technology in Last Level Cache (LLC) designs which occupies a signifcant fraction of total die area in Chip Multi Processors (CMPs) introduces new dimensions of vulnerability, energy consumption, and performance delivery. To be specific, a part of this research focuses on eDRAM Bit Upset Vulnerability Factor (BUVF) to assess vulnerable portion of the eDRAM refresh cycle where the critical charge varies depending on the write voltage, storage and bit-line capacitance. This dissertation broaden the study on vulnerability assessment of LLC through investigating the impact of Process Variations (PV) on narrow resistive sensing margins in high-density NVM arrays, including on-chip cache and primary memory. Large-latency and power-hungry Sense Amplifers (SAs) have been adapted to combat PV in the past. Herein, a novel approach is proposed to leverage the PV in NVM arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time. On the other hand, this dissertation investigates a novel technique to prioritize the service to 1) Extensive Read Reused Accessed blocks of the LLC that are silently dropped from higher levels of cache, and 2) the portion of the working set that may exhibit distant re-reference interval in L2. In particular, we develop a lightweight Multi-level Access History Profiler to effciently identify ERRA blocks through aggregating the LLC block addresses tagged with identical Most Signifcant Bits into a single entry. Experimental results indicate that the proposed technique can reduce the L2 read miss ratio by 51.7% on average across PARSEC and SPEC2006 workloads. In addition, this dissertation will broaden and apply advancements in theories of subspace recovery to pioneer computationally-aware in-situ operand reconstruction via the novel Logic In Interconnect (LI2) scheme. LI2 will be developed, validated, and re?ned both theoretically and experimentally to realize a radically different approach to post-Moore\u27s Law computing by leveraging low-rank matrices features offering data reconstruction instead of fetching data from main memory to reduce energy/latency cost per data movement. We propose LI2 enhancement to attain high performance delivery in the post-Moore\u27s Law era through equipping the contemporary micro-architecture design with a customized memory controller which orchestrates the memory request for fetching low-rank matrices to customized Fine Grain Reconfigurable Accelerator (FGRA) for reconstruction while the other memory requests are serviced as before. The goal of LI2 is to conquer the high latency/energy required to traverse main memory arrays in the case of LLC miss, by using in-situ construction of the requested data dealing with low-rank matrices. Thus, LI2 exchanges a high volume of data transfers with a novel lightweight reconstruction method under specific conditions using a cross-layer hardware/algorithm approach

ARCHITECTING EMERGING MEMORY TECHNOLOGIES FOR ENERGY-EFFICIENT COMPUTING IN MODERN PROCESSORS

Ph.DDOCTOR OF PHILOSOPH

STT-RAM을 이용한 에너지 효율적인 캐시 설계 기술

학위논문 (박사)-- 서울대학교 대학원 : 공과대학 전기·컴퓨터공학부, 2019. 2. 최기영.지난 수십 년간 '메모리 벽' 문제를 해결하기 위해 온 칩 캐시의 크기는 꾸준히 증가해왔다. 하지만 지금까지 캐시에 주로 사용되어 온 메모리 기술인 SRAM은 낮은 집적도와 높은 대기 전력 소모로 인해 큰 캐시를 구성하는 데에는 적합하지 않다. 이러한 SRAM의 단점을 보완하기 위해 더 높은 집적도와 낮은 대기 전력을 소모하는 새로운 메모리 기술인 STT-RAM으로 SRAM을 대체하는 것이 제안되었다. 하지만 STT-RAM은 데이터를 쓸 때 많은 에너지와 시간을 소비하기 때문에 단순히 SRAM을 STT-RAM으로 대체하는 것은 오히려 캐시 에너지 소비를 증가시킨다. 이러한 문제를 해결하기 위해 본 논문에서는 STT-RAM을 이용한 에너지 효율적인 캐시 설계 기술들을 제안한다. 첫 번째, 배타적 캐시 계층 구조에서 STT-RAM을 활용하는 방법을 제안하였다. 배타적 캐시 계층 구조는 계층 간에 중복된 데이터가 없기 때문에 포함적 캐시 계층 구조와 비교하여 더 큰 유효 용량을 갖지만, 배타적 캐시 계층 구조에서는 상위 레벨 캐시에서 내보내진 모든 데이터를 하위 레벨 캐시에 써야 하므로 더 많은 양의 데이터를 쓰게 된다. 이러한 배타적 캐시 계층 구조의 특성은 쓰기 특성이 단점인 STT-RAM을 함께 활용하는 것을 어렵게 한다. 이를 해결하기 위해 본 논문에서는 재사용 거리 예측을 기반으로 하는 SRAM/STT-RAM 하이브리드 캐시 구조를 설계하였다. 두 번째, 비휘발성 STT-RAM을 이용해 캐시를 설계할 때 고려해야 할 점들에 대해 분석하였다. STT-RAM의 비효율적인 쓰기 동작을 줄이기 위해 다양한 해결법들이 제안되었다. 그중 한 가지는 STT-RAM 소자가 데이터를 유지하는 시간을 줄여 (휘발성 STT-RAM) 쓰기 특성을 향상하는 방법이다. STT-RAM에 저장된 데이터를 잃는 것은 확률적으로 발생하기 때문에 저장된 데이터를 안정적으로 유지하기 위해서는 오류 정정 부호(ECC)를 이용해 주기적으로 오류를 정정해주어야 한다. 본 논문에서는 STT-RAM 모델을 이용하여 휘발성 STT-RAM 설계 요소들에 대해 분석하였고 실험을 통해 해당 설계 요소들이 캐시 에너지와 성능에 주는 영향을 보여주었다. 마지막으로, 매니코어 시스템에서의 분산 하이브리드 캐시 구조를 설계하였다. 단순히 기존의 하이브리드 캐시와 분산캐시를 결합하면 하이브리드 캐시의 효율성에 큰 영향을 주는 SRAM 활용도가 낮아진다. 따라서 기존의 하이브리드 캐시 구조에서의 에너지 감소를 기대할 수 없다. 본 논문에서는 분산 하이브리드 캐시 구조에서 SRAM 활용도를 높일 수 있는 두 가지 최적화 기술인 뱅크-내부 최적화와 뱅크간 최적화 기술을 제안하였다. 뱅크-내부 최적화는 highly-associative 캐시를 활용하여 뱅크 내부에서 쓰기 동작이 많은 데이터를 분산시키는 것이고 뱅크간 최적화는 서로 다른 캐시 뱅크에 쓰기 동작이 많은 데이터를 고르게 분산시키는 최적화 방법이다.Over the last decade, the capacity of on-chip cache is continuously increased to mitigate the memory wall problem. However, SRAM, which is a dominant memory technology for caches, is not suitable for such a large cache because of its low density and large static power. One way to mitigate these downsides of the SRAM cache is replacing SRAM with a more efficient memory technology. Spin-Transfer Torque RAM (STT-RAM), one of the emerging memory technology, is a promising candidate for the alternative of SRAM. As a substitute of SRAM, STT-RAM can compensate drawbacks of SRAM with its non-volatility and small cell size. However, STT-RAM has poor write characteristics such as high write energy and long write latency and thus simply replacing SRAM to STT-RAM increases cache energy. To overcome those poor write characteristics of STT-RAM, this dissertation explores three different design techniques for energy-efficient cache using STT-RAM. The first part of the dissertation focuses on combining STT-RAM with exclusive cache hierarchy. Exclusive caches are known to provide higher effective cache capacity than inclusive caches by removing duplicated copies of cache blocks across hierarchies. However, in exclusive cache hierarchies, every block evicted from the upper-level cache is written back to the last-level cache regardless of its dirtiness thereby incurring extra write overhead. This makes it challenging to use STT-RAM for exclusive last-level caches due to its high write energy and long write latency. To mitigate this problem, we design an SRAM/STT-RAM hybrid cache architecture based on reuse distance prediction. The second part of the dissertation explores trade-offs in the design of volatile STT-RAM cache. Due to the inefficient write operation of STT-RAM, various solutions have been proposed to tackle this inefficiency. One of the proposed solutions is redesigning STT-RAM cell for better write characteristics at the cost of shortened retention time (i.e., volatile STT-RAM). Since the retention failure of STT-RAM has a stochastic property, an extra overhead of periodic scrubbing with error correcting code (ECC) is required to tolerate the failure. With an analysis based on analytic STT-RAM model, we have conducted extensive experiments on various volatile STT-RAM cache design parameters including scrubbing period, ECC strength, and target failure rate. The experimental results show the impact of the parameter variations on last-level cache energy and performance and provide a guideline for designing a volatile STT-RAM with ECC and scrubbing. The last part of the dissertation proposes Benzene, an energy-efficient distributed SRAM/STT-RAM hybrid cache architecture for manycore systems running multiple applications. It is based on the observation that a naive application of hybrid cache techniques to distributed caches in a manycore architecture suffers from limited energy reduction due to uneven utilization of scarce SRAM. We propose two-level optimization techniques: intra-bank and inter-bank. Intra-bank optimization leverages highly-associative cache design, achieving more uniform distribution of writes within a bank. Inter-bank optimization evenly balances the amount of write-intensive data across the banks.Abstract i Contents iii List of Figures vii List of Tables xi Chapter 1 Introduction 1 1.1 Exclusive Last-Level Hybrid Cache 2 1.2 Designing Volatile STT-RAM Cache 4 1.3 Distributed Hybrid Cache 5 Chapter 2 Background 9 2.1 STT-RAM 9 2.1.1 Thermal Stability 10 2.1.2 Read and Write Operation of STT-RAM 11 2.1.3 Failures of STT-RAM 11 2.1.4 Volatile STT-RAM 13 2.1.5 Related Work 14 2.2 Exclusive Last-Level Hybrid Cache 18 2.2.1 Cache Hierarchies 18 2.2.2 Related Work 19 2.3 Distributed Hybrid Cache 21 2.3.1 Prediction Hybrid Cache 21 2.3.2 Distributed Cache Partitioning 22 2.3.3 Related Work 23 Chapter 3 Exclusive Last-Level Hybrid Cache 27 3.1 Motivation 27 3.1.1 Exclusive Cache Hierarchy 27 3.1.2 Reuse Distance 29 3.2 Architecture 30 3.2.1 Reuse Distance Predictor 30 3.2.2 Hybrid Cache Architecture 32 3.3 Evaluation 34 3.3.1 Methodology 34 3.3.2 LLC Energy Consumption 35 3.3.3 Main Memory Energy Consumption 38 3.3.4 Performance 39 3.3.5 Area Overhead 39 3.4 Summary 39 Chapter 4 Designing Volatile STT-RAM Cache 41 4.1 Analysis 41 4.1.1 Retention Failure of a Volatile STT-RAM Cell 41 4.1.2 Memory Array Design 43 4.2 Evaluation 45 4.2.1 Methodology 45 4.2.2 Last-Level Cache Energy 46 4.2.3 Performance 51 4.3 Summary 52 Chapter 5 Distributed Hybrid Cache 55 5.1 Motivation 55 5.2 Architecture 58 5.2.1 Intra-Bank Optimization 59 5.2.2 Inter-Bank Optimization 63 5.2.3 Other Optimizations 67 5.3 Evaluation Methodology 69 5.4 Evaluation Results 73 5.4.1 Energy Consumption and Performance 73 5.4.2 Analysis of Intra-bank Optimization 76 5.4.3 Analysis of Inter-bank Optimization 78 5.4.4 Impact of Inter-Bank Optimization on Network Energy 79 5.4.5 Sensitivity Analysis 80 5.4.6 Implementation Overhead 81 5.5 Summary 82 Chapter 6 Conculsion 85 Bibliography 88 초록 101Docto

Evaluation of STT-MRAM main memory for HPC and real-time systems

It is questionable whether DRAM will continue to scale and will meet the needs of next-generation systems. Therefore, significant effort is invested in research and development of novel memory technologies. One of the candidates for nextgeneration memory is Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM is an emerging non-volatile memory with a lot of potential that could be exploited for various requirements of different computing systems. Being a novel technology, STT-MRAM devices are already approaching DRAM in terms of capacity, frequency and device size. Special STT-MRAM features such as intrinsic radiation hardness, non-volatility, zero stand-by power and capability to function in extreme temperatures also make it particularly suitable for aerospace, avionics and automotive applications. Despite of being a conceivable alternative for main memory technology, to this day, academic research of STT-MRAM main memory remains marginal. This is mainly due to the unavailability of publicly available detailed timing parameters of this novel technology, which are required to perform a cycle accurate main memory simulation. Some researchers adopt simplistic memory models to simulate main memory, but such models can introduce significant errors in the analysis of the overall system performance. Therefore, detailed timing parameters are a must-have for any evaluation or architecture exploration study of STT-MRAM main memory. These detailed parameters are not publicly available because STT-MRAM manufacturers are reluctant to release any delicate information on the technology. This thesis demonstrates an approach to perform a cycle accurate simulation of STT-MRAM main memory, being the first to release detailed timing parameters of this technology from academia, essentially enabling researchers to conduct reliable system level simulation of STT-MRAM using widely accepted existing simulation infrastructure. Our results show that, in HPC domain STT-MRAM provide performance comparable to DRAM. Results from the power estimation indicates that STT-MRAM power consumption increases significantly for Activation/Precharge power while Burst power increases moderately and Background power does not deviate much from DRAM. The thesis includes detailed STT-MRAM main memory timing parameters to the main repositories of DramSim2 and Ramulator, two of the most widely used and accepted state-of-the-art main memory simulators. The STT-MRAM timing parameters that has been originated as a part of this thesis, are till date the only reliable and publicly available timing information on this memory technology published from academia. Finally, the thesis analyzes the feasibility of using STT-MRAM in real-time embedded systems by investigating STT-MRAM main memory impact on average system performance and WCET. STT-MRAM's suitability for the real-time embedded systems is validated on benchmarks provided by the European Space Agency (ESA), EEMBC Autobench and MediaBench suite by analyzing performance and WCET impact. In quantitative terms, our results show that STT-MRAM main memory in real-time embedded systems provides performance and WCET comparable to conventional DRAM, while opening up opportunities to exploit various advantages.Es cuestionable si DRAM continuará escalando y cumplirá con las necesidades de los sistemas de la próxima generación. Por lo tanto, se invierte un esfuerzo significativo en la investigación y el desarrollo de nuevas tecnologías de memoria. Uno de los candidatos para la memoria de próxima generación es la Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM es una memoria no volátil emergente con un gran potencial que podría ser explotada para diversos requisitos de diferentes sistemas informáticos. Al ser una tecnología novedosa, los dispositivos STT-MRAM ya se están acercando a la DRAM en términos de capacidad, frecuencia y tamaño del dispositivo. Las características especiales de STTMRAM, como la dureza intrínseca a la radiación, la no volatilidad, la potencia de reserva cero y la capacidad de funcionar en temperaturas extremas, también lo hacen especialmente adecuado para aplicaciones aeroespaciales, de aviónica y automotriz. A pesar de ser una alternativa concebible para la tecnología de memoria principal, hasta la fecha, la investigación académica de la memoria principal de STT-MRAM sigue siendo marginal. Esto se debe principalmente a la falta de disponibilidad de los parámetros de tiempo detallados públicamente disponibles de esta nueva tecnología, que se requieren para realizar un ciclo de simulación de memoria principal precisa. Algunos investigadores adoptan modelos de memoria simplistas para simular la memoria principal, pero tales modelos pueden introducir errores significativos en el análisis del rendimiento general del sistema. Por lo tanto, los parámetros de tiempo detallados son indispensables para cualquier evaluación o estudio de exploración de la arquitectura de la memoria principal de STT-MRAM. Estos parámetros detallados no están disponibles públicamente porque los fabricantes de STT-MRAM son reacios a divulgar información delicada sobre la tecnología. Esta tesis demuestra un enfoque para realizar un ciclo de simulación precisa de la memoria principal de STT-MRAM, siendo el primero en lanzar parámetros de tiempo detallados de esta tecnología desde la academia, lo que esencialmente permite a los investigadores realizar una simulación confiable a nivel de sistema de STT-MRAM utilizando una simulación existente ampliamente aceptada infraestructura. Nuestros resultados muestran que, en el dominio HPC, STT-MRAM proporciona un rendimiento comparable al de la DRAM. Los resultados de la estimación de potencia indican que el consumo de potencia de STT-MRAM aumenta significativamente para la activation/Precharge power, mientras que la Burst power aumenta moderadamente y la Background power no se desvía mucho de la DRAM. La tesis incluye parámetros detallados de temporización memoria principal de STT-MRAM a los repositorios principales de DramSim2 y Ramulator, dos de los simuladores de memoria principal más avanzados y más utilizados y aceptados. Los parámetros de tiempo de STT-MRAM que se han originado como parte de esta tesis, son hasta la fecha la única información de tiempo confiable y disponible al público sobre esta tecnología de memoria publicada desde la academia. Finalmente, la tesis analiza la viabilidad de usar STT-MRAM en real-time embedded systems mediante la investigación del impacto de la memoria principal de STT-MRAM en el rendimiento promedio del sistema y WCET. La idoneidad de STTMRAM para los real-time embedded systems se valida en los applicaciones proporcionados por la European Space Agency (ESA), EEMBC Autobench y MediaBench, al analizar el rendimiento y el impacto de WCET. En términos cuantitativos, nuestros resultados muestran que la memoria principal de STT-MRAM en real-time embedded systems proporciona un desempeño WCET comparable al de una memoria DRAM convencional, al tiempo que abre oportunidades para explotar varias ventajas

Application Centric Networks-On-Chip Design Solutions for Future Multicore Systems

With advances in technology, future multicore systems scaled to 100s and 1000s of cores/accelerators are being touted as an effective solution for extracting huge performance gains using parallel programming paradigms. However with the failure of Dennard Scaling all the components on the chip cannot be run simultaneously without breaking the power and thermal constraints leading to strict chip power envelops. The scaling up of the number of on chip components has also brought upon Networks-On-Chip (NoC) based interconnect designs like 2D mesh. The contribution of NoC to the total on chip power and overall performance has been increasing steadily and hence high performance power-efficient NoC designs are becoming crucial. Future multicore paradigms can be broadly classified, based on the applications they are tailored to, into traditional Chip Multi processor(CMP) based application based systems, characterized by low core and NoC utilization, and emerging big data application based systems, characterized by large amounts of data movement necessitating high throughput requirements. To this order, we propose NoC design solutions for power-savings in future CMPs tailored to traditional applications and higher effective throughput gains in multicore systems tailored to bandwidth intensive applications. First, we propose Fly-over, a light-weight distributed mechanism for power-gating routers attached to switched off cores to reduce NoC power consumption in low load CMP environment. Secondly, we plan on utilizing a promising next generation memory technology, Spin-Transfer Torque Magnetic RAM(STT-MRAM), to achieve enhanced NoC performance to satisfy the high throughput demands in emerging bandwidth intensive applications, while reducing the power consumption simultaneously. Thirdly, we present a hardware data approximation framework for NoCs, APPROX-NoC, with an online data error control mechanism, which can leverage the approximate computing paradigm in the emerging data intensive big data applications to attain higher performance per watt

Applications of Emerging Memory in Modern Computer Systems: Storage and Acceleration

In recent year, heterogeneous architecture emerges as a promising technology to conquer the constraints in homogeneous multi-core architecture, such as supply voltage scaling, off-chip communication bandwidth, and application parallelism. Various forms of accelerators, e.g., GPU and ASIC, have been extensively studied for their tradeoffs between computation efficiency and adaptivity. But with the increasing demand of the capacity and the technology scaling, accelerators also face limitations on cost-efficiency due to the use of traditional memory technologies and architecture design. Emerging memory has become a promising memory technology to inspire some new designs by replacing traditional memory technologies in modern computer system. In this dissertation, I will first summarize my research on the application of Spin-transfer torque random access memory (STT-RAM) in GPU memory hierarchy, which offers simple cell structure and non-volatility to enable much smaller cell area than SRAM and almost zero standby power. Then I will introduce my research about memristor implementation as the computation component in the neuromorphic computing accelerator, which has the similarity between the programmable resistance state of memristors and the variable synaptic strengths of biological synapses to simplify the realization of neural network model. At last, a dedicated interconnection network design for multicore neuromorphic computing system will be presented to reduce the prominent average latency and power consumption brought by NoC in a large size neuromorphic computing system

Evaluation of STT-MRAM main memory for HPC and real-time systems

It is questionable whether DRAM will continue to scale and will meet the needs of next-generation systems. Therefore, significant effort is invested in research and development of novel memory technologies. One of the candidates for nextgeneration memory is Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM is an emerging non-volatile memory with a lot of potential that could be exploited for various requirements of different computing systems. Being a novel technology, STT-MRAM devices are already approaching DRAM in terms of capacity, frequency and device size. Special STT-MRAM features such as intrinsic radiation hardness, non-volatility, zero stand-by power and capability to function in extreme temperatures also make it particularly suitable for aerospace, avionics and automotive applications. Despite of being a conceivable alternative for main memory technology, to this day, academic research of STT-MRAM main memory remains marginal. This is mainly due to the unavailability of publicly available detailed timing parameters of this novel technology, which are required to perform a cycle accurate main memory simulation. Some researchers adopt simplistic memory models to simulate main memory, but such models can introduce significant errors in the analysis of the overall system performance. Therefore, detailed timing parameters are a must-have for any evaluation or architecture exploration study of STT-MRAM main memory. These detailed parameters are not publicly available because STT-MRAM manufacturers are reluctant to release any delicate information on the technology. This thesis demonstrates an approach to perform a cycle accurate simulation of STT-MRAM main memory, being the first to release detailed timing parameters of this technology from academia, essentially enabling researchers to conduct reliable system level simulation of STT-MRAM using widely accepted existing simulation infrastructure. Our results show that, in HPC domain STT-MRAM provide performance comparable to DRAM. Results from the power estimation indicates that STT-MRAM power consumption increases significantly for Activation/Precharge power while Burst power increases moderately and Background power does not deviate much from DRAM. The thesis includes detailed STT-MRAM main memory timing parameters to the main repositories of DramSim2 and Ramulator, two of the most widely used and accepted state-of-the-art main memory simulators. The STT-MRAM timing parameters that has been originated as a part of this thesis, are till date the only reliable and publicly available timing information on this memory technology published from academia. Finally, the thesis analyzes the feasibility of using STT-MRAM in real-time embedded systems by investigating STT-MRAM main memory impact on average system performance and WCET. STT-MRAM's suitability for the real-time embedded systems is validated on benchmarks provided by the European Space Agency (ESA), EEMBC Autobench and MediaBench suite by analyzing performance and WCET impact. In quantitative terms, our results show that STT-MRAM main memory in real-time embedded systems provides performance and WCET comparable to conventional DRAM, while opening up opportunities to exploit various advantages.Es cuestionable si DRAM continuará escalando y cumplirá con las necesidades de los sistemas de la próxima generación. Por lo tanto, se invierte un esfuerzo significativo en la investigación y el desarrollo de nuevas tecnologías de memoria. Uno de los candidatos para la memoria de próxima generación es la Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM). STT-MRAM es una memoria no volátil emergente con un gran potencial que podría ser explotada para diversos requisitos de diferentes sistemas informáticos. Al ser una tecnología novedosa, los dispositivos STT-MRAM ya se están acercando a la DRAM en términos de capacidad, frecuencia y tamaño del dispositivo. Las características especiales de STTMRAM, como la dureza intrínseca a la radiación, la no volatilidad, la potencia de reserva cero y la capacidad de funcionar en temperaturas extremas, también lo hacen especialmente adecuado para aplicaciones aeroespaciales, de aviónica y automotriz. A pesar de ser una alternativa concebible para la tecnología de memoria principal, hasta la fecha, la investigación académica de la memoria principal de STT-MRAM sigue siendo marginal. Esto se debe principalmente a la falta de disponibilidad de los parámetros de tiempo detallados públicamente disponibles de esta nueva tecnología, que se requieren para realizar un ciclo de simulación de memoria principal precisa. Algunos investigadores adoptan modelos de memoria simplistas para simular la memoria principal, pero tales modelos pueden introducir errores significativos en el análisis del rendimiento general del sistema. Por lo tanto, los parámetros de tiempo detallados son indispensables para cualquier evaluación o estudio de exploración de la arquitectura de la memoria principal de STT-MRAM. Estos parámetros detallados no están disponibles públicamente porque los fabricantes de STT-MRAM son reacios a divulgar información delicada sobre la tecnología. Esta tesis demuestra un enfoque para realizar un ciclo de simulación precisa de la memoria principal de STT-MRAM, siendo el primero en lanzar parámetros de tiempo detallados de esta tecnología desde la academia, lo que esencialmente permite a los investigadores realizar una simulación confiable a nivel de sistema de STT-MRAM utilizando una simulación existente ampliamente aceptada infraestructura. Nuestros resultados muestran que, en el dominio HPC, STT-MRAM proporciona un rendimiento comparable al de la DRAM. Los resultados de la estimación de potencia indican que el consumo de potencia de STT-MRAM aumenta significativamente para la activation/Precharge power, mientras que la Burst power aumenta moderadamente y la Background power no se desvía mucho de la DRAM. La tesis incluye parámetros detallados de temporización memoria principal de STT-MRAM a los repositorios principales de DramSim2 y Ramulator, dos de los simuladores de memoria principal más avanzados y más utilizados y aceptados. Los parámetros de tiempo de STT-MRAM que se han originado como parte de esta tesis, son hasta la fecha la única información de tiempo confiable y disponible al público sobre esta tecnología de memoria publicada desde la academia. Finalmente, la tesis analiza la viabilidad de usar STT-MRAM en real-time embedded systems mediante la investigación del impacto de la memoria principal de STT-MRAM en el rendimiento promedio del sistema y WCET. La idoneidad de STTMRAM para los real-time embedded systems se valida en los applicaciones proporcionados por la European Space Agency (ESA), EEMBC Autobench y MediaBench, al analizar el rendimiento y el impacto de WCET. En términos cuantitativos, nuestros resultados muestran que la memoria principal de STT-MRAM en real-time embedded systems proporciona un desempeño WCET comparable al de una memoria DRAM convencional, al tiempo que abre oportunidades para explotar varias ventajas.Postprint (published version

Gestión de jerarquías de memoria híbridas a nivel de sistema

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadoras y Automática y de Ku Leuven, Arenberg Doctoral School, Faculty of Engineering Science, leída el 11/05/2017.In electronics and computer science, the term ‘memory’ generally refers to devices that are used to store information that we use in various appliances ranging from our PCs to all hand-held devices, smart appliances etc. Primary/main memory is used for storage systems that function at a high speed (i.e. RAM). The primary memory is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based transistors, used for example as primary memory but also other purposes in computers and other digital electronic devices. The secondary/auxiliary memory, in comparison provides program and data storage that is slower to access but offers larger capacity. Examples include external hard drives, portable flash drives, CDs, and DVDs. These devices and media must be either plugged in or inserted into a computer in order to be accessed by the system. Since secondary storage technology is not always connected to the computer, it is commonly used for backing up data. The term storage is often used to describe secondary memory. Secondary memory stores a large amount of data at lesser cost per byte than primary memory; this makes secondary storage about two orders of magnitude less expensive than primary storage. There are two main types of semiconductor memory: volatile and nonvolatile. Examples of non-volatile memory are ‘Flash’ memory (sometimes used as secondary, sometimes primary computer memory) and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs). Examples of volatile memory are primary memory (typically dynamic RAM, DRAM), and fast CPU cache memory (typically static RAM, SRAM, which is fast but energy-consuming and offer lower memory capacity per are a unit than DRAM). Non-volatile memory technologies in Si-based electronics date back to the 1990s. Flash memory is widely used in consumer electronic products such as cellphones and music players and NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. The rapid increase of leakage currents in Silicon CMOS transistors with scaling poses a big challenge for the integration of SRAM memories. There is also the case of susceptibility to read/write failure with low power schemes. As a result of this, over the past decade, there has been an extensive pooling of time, resources and effort towards developing emerging memory technologies like Resistive RAM (ReRAM/RRAM), STT-MRAM, Domain Wall Memory and Phase Change Memory(PRAM). Emerging non-volatile memory technologies promise new memories to store more data at less cost than the expensive-to build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. These new memory technologies combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the non-volatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. The research and information on these Non-Volatile Memory (NVM) technologies has matured over the last decade. These NVMs are now being explored thoroughly nowadays as viable replacements for conventional SRAM based memories even for the higher levels of the memory hierarchy. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional(3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years...En el campo de la informática, el término ‘memoria’ se refiere generalmente a dispositivos que son usados para almacenar información que posteriormente será usada en diversos dispositivos, desde computadoras personales (PC), móviles, dispositivos inteligentes, etc. La memoria principal del sistema se utiliza para almacenar los datos e instrucciones de los procesos que se encuentre en ejecución, por lo que se requiere que funcionen a alta velocidad (por ejemplo, DRAM). La memoria principal está implementada habitualmente mediante memorias semiconductoras direccionables, siendo DRAM y SRAM los principales exponentes. Por otro lado, la memoria auxiliar o secundaria proporciona almacenaje(para ficheros, por ejemplo); es más lenta pero ofrece una mayor capacidad. Ejemplos típicos de memoria secundaria son discos duros, memorias flash portables, CDs y DVDs. Debido a que estos dispositivos no necesitan estar conectados a la computadora de forma permanente, son muy utilizados para almacenar copias de seguridad. La memoria secundaria almacena una gran cantidad de datos aun coste menor por bit que la memoria principal, siendo habitualmente dos órdenes de magnitud más barata que la memoria primaria. Existen dos tipos de memorias de tipo semiconductor: volátiles y no volátiles. Ejemplos de memorias no volátiles son las memorias Flash (algunas veces usadas como memoria secundaria y otras veces como memoria principal) y memorias ROM/PROM/EPROM/EEPROM (usadas para firmware como programas de arranque). Ejemplos de memoria volátil son las memorias DRAM (RAM dinámica), actualmente la opción predominante a la hora de implementar la memoria principal, y las memorias SRAM (RAM estática) más rápida y costosa, utilizada para los diferentes niveles de cache. Las tecnologías de memorias no volátiles basadas en electrónica de silicio se remontan a la década de1990. Una variante de memoria de almacenaje por carga denominada como memoria Flash es mundialmente usada en productos electrónicos de consumo como telefonía móvil y reproductores de música mientras NAND Flash solid state disks(SSDs) están progresivamente desplazando a los dispositivos de disco duro como principal unidad de almacenamiento en computadoras portátiles, de escritorio e incluso en centros de datos. En la actualidad, hay varios factores que amenazan la actual predominancia de memorias semiconductoras basadas en cargas (capacitivas). Por un lado, se está alcanzando el límite de integración de las memorias Flash, lo que compromete su escalado en el medio plazo. Por otra parte, el fuerte incremento de las corrientes de fuga de los transistores de silicio CMOS actuales, supone un enorme desafío para la integración de memorias SRAM. Asimismo, estas memorias son cada vez más susceptibles a fallos de lectura/escritura en diseños de bajo consumo. Como resultado de estos problemas, que se agravan con cada nueva generación tecnológica, en los últimos años se han intensificado los esfuerzos para desarrollar nuevas tecnologías que reemplacen o al menos complementen a las actuales. Los transistores de efecto campo eléctrico ferroso (FeFET en sus siglas en inglés) se consideran una de las alternativas más prometedores para sustituir tanto a Flash (por su mayor densidad) como a DRAM (por su mayor velocidad), pero aún está en una fase muy inicial de su desarrollo. Hay otras tecnologías algo más maduras, en el ámbito de las memorias RAM resistivas, entre las que cabe destacar ReRAM (o RRAM), STT-RAM, Domain Wall Memory y Phase Change Memory (PRAM)...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu