A Rate Control Model of MPEG-4 Encoder for Video Transmission over Wireless Sensor Network

Recently, multimedia application has a lot of attention in the research community, especially when transmitting video over IEEE 802.15.4 standard. This is due to the capability of providing low complexity with low cost, but still maintaining the quality of video in term of packet received. However, transmitting video over Wireless Sensor Network (WSN) posed a new research challenges with high bandwidth demand and energy constrained of sensor nodes. MPEG-4 video codec is one of the compression techniques that used to decrease the amount of bandwidth required to meet WSN environment. Therefore, video encoding is a useful tool for rate control to control the video bit rate and maintaining the video quality especially in real-time communication applications. Video bit rate is affected by quantization scale, frame rate, and Group of Picture (GOP) size. A rate control model called enhanced Video Motion Classification based (e-ViMoC) model is proposed in this paper to produce the desired bit rate that complies to the IEEE 802.15.4 standard, while at the same time preserving the video quality. The analysis has shown that, the video transmission using e-ViMoC rate control achieves enhancement in delivery ratio, energy consumption and video quality (PSNR) when compared to video transmission using uncompressed video

Subjective Quality Assessment of the Impact of Buffer Size in Fine-Grain Parallel Video Encoding

Fine-Grain parallelism is essential for real-time video encoding performance. This usually implies setting a fixed buffer size for each encoded block. The choice of this parameter is critical for both performance and hardware cost. In this paper we analyze the impact of buffer size on image subjective quality, and its relation with other encoding parameters. We explore the consequences on visual quality, when minimizing buffer size to the point of causing the discard of quantized coefficients for highest frequencies. Finally, we propose some guidelines for the choice of buffer size, that has proven to be heavily dependent, in addition to other parameters, on the type of sequence being encoded. These guidelines are useful for the design of efficient realtime encoders, both hardware and software

Video Stream Adaptation In Computer Vision Systems

Computer Vision (CV) has been deployed recently in a wide range of applications, including surveillance and automotive industries. According to a recent report, the market for CV technologies will grow to $33.3 billion by 2019. Surveillance and automotive industries share over 20% of this market. This dissertation considers the design of real-time CV systems with live video streaming, especially those over wireless and mobile networks. Such systems include video cameras/sensors and monitoring stations. The cameras should adapt their captured videos based on the events and/or available resources and time requirement. The monitoring station receives video streams from all cameras and run CV algorithms for decisions, warnings, control, and/or other actions. Real-time CV systems have constraints in power, computational, and communicational resources. Most video adaptation techniques considered the video distortion as the primary metric. In CV systems, however, the main objective is enhancing the event/object detection/recognition/tracking accuracy. The accuracy can essentially be thought of as the quality perceived by machines, as opposed to the human perceptual quality. High-Efficiency Video Coding (HEVC) is a recent encoding standard that seeks to address the limited communication bandwidth problem as a result of the popularity of High Definition (HD) videos. Unfortunately, HEVC adopts algorithms that greatly slow down the encoding process, and thus results in complications in real-time systems. This dissertation presents a method for adapting live video streams to limited and varying network bandwidth and energy resources. It analyzes and compares the rate-accuracy and rate-energy characteristics of various video streams adaptation techniques in CV systems. We model the video capturing, encoding, and transmission aspects and then provide an overall model of the power consumed by the video cameras and/or sensors. In addition to modeling the power consumption, we model the achieved bitrate of video encoding. We validate and analyze the power consumption models of each phase as well as the aggregate power consumption model through extensive experiments. The analysis includes examining individual parameters separately and examining the impacts of changing more than one parameter at a time. For HEVC, we develop an algorithm that predicts the size of the block without iterating through the exhaustive Rate Distortion Optimization (RDO) method. We demonstrate the effectiveness of the proposed algorithm in comparison with existing algorithms. The proposed algorithm achieves approximately 5 times the encoding speed of the RDO algorithm and 1.42 times the encoding speed of the fastest analyzed algorithm

Lexicographic Bit Allocation for MPEG Video

We consider the problem of allocating bits among pictures in an MPEG video coder to equalize the visual quality of the coded pictures, while meeting bu er and channel constraints imposed by the MPEG Video Bu ering Veri er. We address this problem within a framework that consists of three components: 1) a bit production model for the input pictures, 2) a set of bit-rate constraints imposed by the Video Bu ering Veri er, and 3) a novel lexicographic criterion for optimality. Under this framework, we derive simple necessary and su cient conditions for optimality that lead to e cient algorithms

Algorithms & implementation of advanced video coding standards

Advanced video coding standards have become widely deployed coding techniques used in numerous products, such as broadcast, video conference, mobile television and blu-ray disc, etc. New compression techniques are gradually included in video coding standards so that a 50% compression rate reduction is achievable every five years. However, the trend also has brought many problems, such as, dramatically increased computational complexity, co-existing multiple standards and gradually increased development time. To solve the above problems, this thesis intends to investigate efficient algorithms for the latest video coding standard, H.264/AVC. Two aspects of H.264/AVC standard are inspected in this thesis: (1) Speeding up intra4x4 prediction with parallel architecture. (2) Applying an efficient rate control algorithm based on deviation measure to intra frame. Another aim of this thesis is to work on low-complexity algorithms for MPEG-2 to H.264/AVC transcoder. Three main mapping algorithms and a computational complexity reduction algorithm are focused by this thesis: motion vector mapping, block mapping, field-frame mapping and efficient modes ranking algorithms. Finally, a new video coding framework methodology to reduce development time is examined. This thesis explores the implementation of MPEG-4 simple profile with the RVC framework. A key technique of automatically generating variable length decoder table is solved in this thesis. Moreover, another important video coding standard, DV/DVCPRO, is further modeled by RVC framework. Consequently, besides the available MPEG-4 simple profile and China audio/video standard, a new member is therefore added into the RVC framework family. A part of the research work presented in this thesis is targeted algorithms and implementation of video coding standards. In the wide topic, three main problems are investigated. The results show that the methodologies presented in this thesis are efficient and encourage