Timber Talk, Vol. 55, No. 3, September 2017

Lumber Market Reports: Northern, Southern, Appalachian Hardwood Lumber Prices: Green, Kiln-Dried, Pallet Lumber, Ties (7x9) Letter from the Editor: Governor’s “Red Tape Review” Offering opportunity for the Nebraska forest industry Understanding Moisture Meters, By Brett Miller, National Hardwood Flooring Association - “Hardwood Floors” Magazine Nebraska Forest Industry Spotlight: MTS Tree Service Forestry Field Day Announcement: September 30, 2017 Horning State Farm - 2106 Horning Road Plattsmouth, Nebraska Workshop Announcement: Forest Products Marketing, November 9, 2017 Buffalo County Extension Building Kearney, Nebraska Trading Post Timber Sale

Application of advanced technology to space automation

Automated operations in space provide the key to optimized mission design and data acquisition at minimum cost for the future. The results of this study strongly accentuate this statement and should provide further incentive for immediate development of specific automtion technology as defined herein. Essential automation technology requirements were identified for future programs. The study was undertaken to address the future role of automation in the space program, the potential benefits to be derived, and the technology efforts that should be directed toward obtaining these benefits

Importance and applications of robotic and autonomous systems (RAS) in railway maintenance sector: a review

Maintenance, which is critical for safe, reliable, quality, and cost-effective service, plays a dominant role in the railway industry. Therefore, this paper examines the importance and applications of Robotic and Autonomous Systems (RAS) in railway maintenance. More than 70 research publications, which are either in practice or under investigation describing RAS developments in the railway maintenance, are analysed. It has been found that the majority of RAS developed are for rolling-stock maintenance, followed by railway track maintenance. Further, it has been found that there is growing interest and demand for robotics and autonomous systems in the railway maintenance sector, which is largely due to the increased competition, rapid expansion and ever-increasing expense

Update urban basemap by using the LiDAR mobile mapping system : the case of Abu Dhabi municipal system

Basemaps are the main resource used in urban planning and in building and infrastructure asset management. These maps are used by citizens and by private and public stakeholders. Therefore, accurate, up-to-date geoinformation of reference are needed to provide a good service. In general, basemaps have been updated by aerial photogrammetry or field surveying, but these methods are not always possible and alternatives need to be sought. Current limitations and challenges that face traditional field surveys include areas with extreme weather, deserts or artic environments, and flight restrictions due to proximity with other countries if there is not an agreement. In such cases, alternatives for large-scale are required. This thesis proposes the use of a mobile mapping system (MMS) to update urban basemaps. Most urban features can be extracted from point cloud using commercial software or open libraries. However, there are some exceptions: manhole covers, or hidden elements even with captures from defferent perspective, the most common building corners. Therefore, the main objective of this study was to establish a methodology for extracting manholes automatically and for completing hidden corners of buildings, so that urban basemaps can be updated. The algorithm developed to extract manholes is based on time, intensity and shape detection parameters, whereas additional information from satellite images is used to complete buildings. Each municipality knows the materials and dimensions of its manholes. Taking advantage of this knowledge, the point cloud is filtered to classify points according to the set of intensity values associated with the manhole material. From the classified points, the minimum bounding rectangles (MBR) are obtained and finally the shape is adjusted and drawn. We use satellite imagery to automatically digitize the layout of building footprints with automated software tools. Then, the visible corners of buildings from the LiDAR point cloud are imported and a fitting process is performed by comparing them with the corners of the building from the satellite image. Two methods are evaluated to establish which is the most suitable for adjustment in these conditions. In the first method, the differences in X and Y directions are measured in the corners, where LiDAR and satellite data are available, and is often computed as the average of the offsets. In the second method, a Helmert 2D transformation is applied. MMS involves Global Navigation Satellite Systems (GNSS) and Inertial Measurement Units (IMU) to georeference point clouds. Their accuracy depends on the acquisition environment. In this study, the influence of the urban pattern is analysed in three zones with varied urban characteristics: different height buildings, open areas, and areas with a low and high level of urbanization. To evaluate the efficiency of the proposed algorithms, three areas were chosen with varying urban patterns in Abu Dhabi. In these areas, 3D urban elements (light poles, street signs, etc) were automatically extracted using commercial software. The proposed algorithms were applied to the manholes and buildings. The completeness and correctness ratio, and geometric accuracy were calculated for all urban elements in the three areas. The best success rates (>70%) were for light poles, street signs and road curbs, regardless of the height of the buildings. The worst rate was obtained for the same features in peri-urban areas, due to high vegetation. In contrast, the best results for trees were found in theses areas. Our methodology demonstrates the great potential and efficiency of mobile LiDAR technology in updating basemaps; a process that is required to achieve standard accuracy in large scale maps. The cost of the entire process and the time required for the proposed methodology was calculated and compared with the traditional method. It was found that mobile LiDAR could be a standard cost-efficient procedure for updating maps.La cartografía de referencia es la principal herramienta en planificación urbanística, y gestión de infraestructuras y edificios, al servicio de ciudadanos, empresas y administración. Por esta razón, debe estar actualizada y ser lo más precisa posible. Tradicionalmente, la cartografía se actualiza mediante fotogrametría aérea o levantamientos terrestres. No obstante, deben buscarse alternativas válidas para escalas grandes, porque no siempre es posible emplear estas técnicas debido a las limitaciones y retos actuales a los que se enfrenta la medición tradicional en algunas zonas del planeta, con meteorología extrema o restricciones de vuelo por la proximidad a la frontera con otros países. Esta tesis propone el uso del sistema Mobile Mapping System (MMS) para actualizar la cartografía urbana de referencia. La mayoría de los elementos pueden extraerse empleando software comercial o librerías abiertas, excepto los registros de servicios. Los elementos ocultos son otro de los inconvenientes encontrados en el proceso de creación o actualización de la cartografía, incluso si se dispone de capturas desde diferentes puntos de vista. El caso más común es el de las esquinas de edificios. Por ello, el principal objetivo de este estudio es establecer una metodología de extracción automática de los registros y completar las esquinas ocultas de los edificios para actualizar cartografía urbana. El algoritmo desarrollado para la detección y extracción de registros se basa en parámetros como el tiempo, la intensidad de la señal laser y la forma de los registros, mientras que para completar los edificios se emplea información adicional de imágenes satélite. Aprovechando el conocimiento del material y dimensión de los registros, en disposición de los gestores municipales, el algoritmo propuesto filtra y clasifica los puntos de acuerdo a los valores de intensidad. De aquellos clasificados como registros se calcula el mínimo rectángulo que los contiene (Minimum Bounding Rectangle) y finalmente se ajusta la forma y se dibuja. Las imágenes de satélite son empleadas para obtener automáticamente la huella de los edificios. Posteriormente, se importan las esquinas visibles de los edificios obtenidas desde la nube de puntos y se realiza el ajuste comparándolas con las obtenidas desde satélite. Para llevar a cabo este ajuste se han evaluado dos métodos, el primero de ellos considera las diferencias entre las coordenadas XY, desplazándose el promedio. En el segundo, se aplica una transformación Helmert2D. MMS emplea sistemas de navegación global por satélite (Global Navigation Satellite Systems, GNSS) e inerciales (Inertial Measurement Unit, IMU) para georreferenciar la nube de puntos. La precisión de estos sistemas de posicionamiento depende del entorno de adquisición. Por ello, en este estudio se han seleccionado tres áreas con distintas características urbanas (altura de edificios, nivel de urbanización y áreas abiertas) de Abu Dhabi con el fin de analizar su influencia, tanto en la captura, como en la extracción de los elementos. En el caso de farolas, señales viales, árboles y aceras se ha realizado con software comercial, y para registros y edificios con los algoritmos propuestos. Las ratios de corrección y completitud, y la precisión geométrica se han calculado en las diferentes áreas urbanas. Los mejores resultados se han conseguido para las farolas, señales y bordillos, independientemente de la altura de los edificios. La peor ratio se obtuvo para los mismos elementos en áreas peri-urbanas, debido a la vegetación. Resultados opuestos se han conseguido en la detección de árboles. El coste económico y en tiempo de la metodología propuesta resulta inferior al de métodos tradicionales. Lo cual demuestra el gran potencial y eficiencia de la tecnología LiDAR móvil para la actualización cartografía de referenciaPostprint (published version

Self-Calibration Methods for Uncontrolled Environments in Sensor Networks: A Reference Survey

Growing progress in sensor technology has constantly expanded the number and range of low-cost, small, and portable sensors on the market, increasing the number and type of physical phenomena that can be measured with wirelessly connected sensors. Large-scale deployments of wireless sensor networks (WSN) involving hundreds or thousands of devices and limited budgets often constrain the choice of sensing hardware, which generally has reduced accuracy, precision, and reliability. Therefore, it is challenging to achieve good data quality and maintain error-free measurements during the whole system lifetime. Self-calibration or recalibration in ad hoc sensor networks to preserve data quality is essential, yet challenging, for several reasons, such as the existence of random noise and the absence of suitable general models. Calibration performed in the field, without accurate and controlled instrumentation, is said to be in an uncontrolled environment. This paper provides current and fundamental self-calibration approaches and models for wireless sensor networks in uncontrolled environments

UAVs for the Environmental Sciences

This book gives an overview of the usage of UAVs in environmental sciences covering technical basics, data acquisition with different sensors, data processing schemes and illustrating various examples of application