Modelling Heterogeneous DSP–FPGA Based System Partitioning with Extensions to the Spinach Simulation Environment

In this paper we present system-on-a-chip extensions to the Spinach simulation environment for rapidly prototyping heterogeneous DSP/FPGA based architectures, specifically in the embedded domain. This infrastructure has been successfully used to model systems varying from multiprocessor gigabit ethernet controllers to Texas Instruments C6x series DSP based systems with tightly coupled FPGA based coprocessors for computational offloading. As an illustrative example of this toolsets functionality, we investigate workload partitioning in heterogeneous DSP/FPGA based embedded environments. Specifically, we focus on computational offloading of matrix multiplication kernels across DSP/FPGA based embedded architectures

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Control Software for Reconfigurable Coprocessors

On-line data processing at the ATLAS general purpose particle detector, which is currently under construction at Geneva, generates demands on computing power that are difficult to satisfy with commodity CPU-based computers. One of the most demanding applications is the recognition of particle tracks that originate from B-quark decays. However, this and many others applications can benefit from parallel execution on field programmable gate arrays (FPGA). After the demonstration of accelerated track recognition with big FPGA-based custom computers, the development of FPGA based coprocessors started in the late 1990's. Applications of FPGA coprocessors are usually partitioned between the host and the tightly coupled coprocessor. The objective of the research that I present in this thesis was the development of software that mediates to applications the access to FPGA coprocessors. I used a software process based on iterative prototyping to cope with the expected changing requirements. Also, I used a strict bottom-up design to create classes that model devices on the coprocessors. Using these low-level classes, I developed tools which were used for bootstrapping, debugging, and firmware update of the coprocessors during their development and maintenance. Measurements show that the software overhead introduced by object-oriented programming and software layering is small. The software-support for six different coprocessors was partitioned into corresponding independent packages, which reuse a set of packages that provide common and basic functions. The steady evolution and use of the software during more than four years shows that the software is maintainable, adaptable, and usable

A HT3 Platform for Rapid Prototyping and High Performance Reconfigurable Computing

FPGAs as reconfigurable devices play an important role in both rapid prototyping and high performance reconfigurable computing. Usually, FPGA vendors help the users with pre-designed cores, for instance for various communication protocols. However, this is only true for widely used protocols. In the use case described here, the target application may benefit from a tight integration of the FPGA in a computing system. Typical commodity protocols like PCI Express may not fulfill these demands. HyperTransport (HT), on the other hand, allows connecting directly and without intermediate bridges or protocol conversion to a processor interface. As a result, communication costs between the FPGA unit and both processor and main memory are minimal. In this paper we present an HT3 interface for Stratix IV based FPGAs, which allows for minimal latencies and high bandwidths between processor and device and main memory and device. Designs targeting a HT connection can now be prototyped in real world systems. Furthermore, this design can be leveraged for acceleration tasks, with the minimal communication costs allowing fine-grain work deployment and the use of cost-efficient main memory instead of size-limited and costly on-device memory

Reconfigurable Mobile Multimedia Systems

This paper discusses reconfigurability issues in lowpower hand-held multimedia systems, with particular emphasis on energy conservation. We claim that a radical new approach has to be taken in order to fulfill the requirements - in terms of processing power and energy consumption - of future mobile applications. A reconfigurable systems-architecture in combination with a QoS driven operating system is introduced that can deal with the inherent dynamics of a mobile system. We present the preliminary results of studies we have done on reconfiguration in hand-held mobile computers: by having reconfigurable media streams, by using reconfigurable processing modules and by migrating functions

Hardware Design and Implementation of Role-Based Cryptography

Traditional public key cryptographic methods provide access control to sensitive data by allowing the message sender to grant a single recipient permission to read the encrypted message. The Need2Know® system (N2K) improves upon these methods by providing role-based access control. N2K defines data access permissions similar to those of a multi-user file system, but N2K strictly enforces access through cryptographic standards. Since custom hardware can efficiently implement many cryptographic algorithms and can provide additional security, N2K stands to benefit greatly from a hardware implementation. To this end, the main N2K algorithm, the Key Protection Module (KPM), is being specified in VHDL. The design is being built and tested incrementally: this first phase implements the core control logic of the KPM without integrating its cryptographic sub-modules. Both RTL simulation and formal verification are used to test the design. This is the first N2K implementation in hardware, and it promises to provide an accelerated and secured alternative to the software-based system. A hardware implementation is a necessary step toward highly secure and flexible deployments of the N2K system

Self-Partial and Dynamic Reconfiguration Implementation for AES using FPGA

This paper addresses efficient hardware/software implementation approaches for the AES (Advanced Encryption Standard) algorithm and describes the design and performance testing algorithm for embedded system. Also, with the spread of reconfigurable hardware such as FPGAs (Field Programmable Gate Array) embedded cryptographic hardware became cost-effective. Nevertheless, it is worthy to note that nowadays, even hardwired cryptographic algorithms are not so safe. From another side, the self-reconfiguring platform is reported that enables an FPGA to dynamically reconfigure itself under the control of an embedded microprocessor. Hardware acceleration significantly increases the performance of embedded systems built on programmable logic. Allowing a FPGA-based MicroBlaze processor to self-select the coprocessors uses can help reduce area requirements and increase a system's versatility. The architecture proposed in this paper is an optimal hardware implementation algorithm and takes dynamic partially reconfigurable of FPGA. This implementation is good solution to preserve confidentiality and accessibility to the information in the numeric communication