Waveform design and processing techniques in OFDM radar

Includes bibliographical referencesWith the advent of powerful digital hardware, software defined radio and radar have become an active area of research and development. This in turn has given rise to many new research directions in the radar community, which were previously not comprehensible. One such direction is the recently investigated OFDM radar, which uses OFDM waveforms instead of the classic linear frequency mod- ulated waveforms. Being a wideband signal, the OFDM symbol offers spectral efficiency along with improved range resolution, two enticing characteristics for radar. Historically a communication signal, OFDM is a special form of multi- carrier modulation, where a single data stream is transmitted over a number of lower rate carriers. The information is conveyed via sets of complex phase codes modulating the phase of the carriers. At the receiver, a demodulation stage estimates the transmitted phase codes and the information in the form of binary words is finally retrieved. In radar, the primary goal is to detect the presence of targets and possibly estimate some of their features through measurable quantities, e.g. range, Doppler, etc. Yet, being a young waveform in radar, more understanding is required to turn it into a standard radar waveform. Our goal, with this thesis, is to mature our comprehension of OFDM for radar and contribute to the realm of OFDM radar. First, we develop two processing alternatives for the case of a train of wideband OFDM pulses. In this, our first so-called time domain solution consists in applying a matched filter to compress the received echoes in the fast time before applying a fast Fourier transform in the slow time to form the range Doppler image. We motivate this approach after demonstrating that short OFDM pulses are Doppler tolerant. The merit of this approach is to conserve existing radar architectures while operating OFDM waveforms. The second so-called frequency domain solution that we propose is inspired from communication engineering research since the received echoes are tumbled in the frequency domain. After several manipulations, the range Doppler image is formed. We explain how this approach allows to retrieve an estimate of the unambiguous radial velocity, and propose two methods for that. The first method requires the use of identical sequence (IS) for the phase codes and is, as such, binding, while the other method works irrespective of the phase codes. Like the previous technique, this processing solution accommodates high Doppler frequencies and the degradation in the range Doppler image is negligible provided that the spacing between consecutive subcarriers is sufficient. Unfortunately, it suffers from the issue of intersymbol interference (ISI). After observing that both solutions provide the same processing gain, we clarify the constraints that shall apply to the OFDM signals in either of these solutions. In the first solution, special care has been employed to design OFDM pulses with low peak-to-mean power ratio (PMEPR) and low sidelobe level in the autocorrelation function. In the second solution, on the other hand, only the constraint of low PMEPR applies since the sidelobes of the scatterer characteristic function in the range Doppler image are Fourier based. Then, we develop a waveform-processing concept for OFDM based stepped frequency waveforms. This approach is intended for high resolution radar with improved low probability of detection (LPD) characteristics, as we propose to employ a frequency hopping scheme from pulse to pulse other than the conventional linear one. In the same way we treated our second alternative earlier, we derive our high range resolution processing in matrix terms and assess the degradation caused by high Doppler on the range profile. We propose using a bank of range migration filters to retrieve the radial velocity of the scatterer and realise that the issue of classical ambiguity in Doppler can be alleviated provided that the relative bandwidth, i.e. the total bandwidth covered by the train of pulses divided by the carrier frequency, is chosen carefully. After discussing a deterministic artefact caused by frequency hopping and the means to reduce it at the waveform design or processing level, we discuss the benefit offered by our concept in comparison to other standard wideband methods and emphasize on its LPD characteristics at the waveform and pulse level. In our subsequent analysis, we investigate genetic algorithm (GA) based techniques to finetune OFDM pulses in terms of radar requirements viz., low PMEPR only or low PMEPR and low sidelobe level together, as evoked earlier. To motivate the use of genetic algorithms, we establish that existing techniques are not exible in terms of the OFDM structure (the assumption that all carriers are present is always made). Besides, the use of advanced objective functions suited to particular configurations (e.g. low sidelobe level in proximity of the main autocorrelation peak) as well as the combination of multiple objective functions can be done elegantly with GA based techniques. To justify that solely phase codes are used for our optimisation(s), we stress that the weights applied to the carriers composing the OFDM signal can be spared to cope with other radar related challenges and we give an example with a case of enhanced detection. Next, we develop a technique where we exploit the instantaneous wideband trans- mission to characterise the type of the canonical scatterers that compose a target. Our idea is based on the well-established results from the geometrical theory of diffraction (GTD), where the scattered energy varies with frequency. We present the problem related to ISI, stress the need to design the transmitted pulse so as to reduce this risk and suggest having prior knowledge over the scatterers relative positions. Subsequently, we develop a performance analysis to assess the behaviour of our technique in the presence of additive white Gaussian noise (AWGN). Then, we demonstrate the merit of integrating over several pulses to improve the characterisation rate of the scatterers. Because the scattering centres of a target resonate variably at different frequencies, frequency diversity is another enticing property which can be used to enhance the sensing performance. Here, we exploit this element of diversity to improve the classification function. We develop a technique where the classification takes place at the waveform design when few targets are present. In our case study, we have three simple targets. Each is composed of perfectly electrically conducting spheres for which we have exact models of the scattered field. We develop a GA based search to find optimal OFDM symbols that best discriminate one target against any other. Thereafter, the OFDM pulse used for probing the target in the scene is constructed by stacking the resulting symbols in time. After discussing the problem of finding the best frequency window to sense the target, we develop a performance analysis where our figure of merit is the overall probability of correct classification. Again, we prove the merit of integrating over several pulses to reach classification rates above 95%. In turn, this study opens onto new challenges in the realm of OFDM radar. We leave for future research the demonstration of the practical applicability of our novel concepts and mention manifold research axes, viz., a signal processing axis that would include methods to cope with inter symbol interference, range migration issues, methods to raise the ambiguity in Doppler when several echoes from distinct scatterers overlap in the case of our frequency domain processing solutions; an algorithmic axis that would concern the heuristic techniques employed in the design of our OFDM pulses. We foresee that further tuning might help speeding up our GA based algorithms and we expect that constrained multi- objective optimisation GA (MOO-GA) based techniques shall benefit the OFDM pulse design problem in radar. A system design axis that would account for the hardware components' behaviours, when possible, directly at the waveform design stage and would include implementation of the OFDM radar system

Bio-inspired processing of radar target echoes

Echolocating bats have evolved the ability to detect, resolve and discriminate targets in highly challenging environments using biological sonar. The way bats process signals in the receiving auditory system is not the same as that of radar and sonar and hence investigating differences and similarities might provide useful lessons to improve synthetic sensors. The Spectrogram Correlation And Transformation (SCAT) receiver is an existing model of the bat auditory system that takes into account the physiology and the neural organisation of bats that emit broadband signals. In this study, the authors present a baseband receiver equivalent to the SCAT that allows an analysis of target echoes at baseband. The baseband SCAT (BSCT) is used to investigate the output of the bat-auditory model for two closely spaced scatterers and to carry out an analysis of range resolution performance and a comparison with the conventional matched filter. Results firstly show that the BSCT provides improved resolution performance. It is then demonstrated that the output of the BSCT can be obtained with an equivalent matched-filter based receiver. The results are verified with a set of laboratory experiments at radio frequencies in a high signal-to-noise ratio

Adaptive Coding, Modulation and Filtering of Radar Signals

In this chapter, some of the issues associated with radar signal processing are highlighted, with an emphasis on adaptability. Signal processing operations are carried by systems in order to enhance the received signal or to clarify its content of information. Received radar signal should be subjected to processing prior to the extraction of useful target information out of it so as to emphasize desired signal among other accompanying signals. Processing of the radio frequency (RF) signal is generally done in an analogue manner, while digital signal processing (DSP) became dominant in the intermediate-frequency (IF) and low-frequency portions of the system. Since the detectability and immunity against interference and clutter strongly depend on the waveform used, it will be more efficient to apply a diverse waveform instead of confinement to an invariable waveform of a fixed code and pattern. Adaptive coding, modulation and filtering of radar signals provide high degree of diversity as well as flexibility and agility for signal processors versus changing sources of interference and environmentally dependent reflectors. Constant false alarm rate (CFAR) is an adaptive processing technique that reduces noise and clutter. Different methods are applied in CFAR technique to adaptively cope with varying clutter density and distribution

Short Range Radar Based on UWB Technology

ISBN 978-953-307-029-

Radar Imaging with a Network of Digital Noise Radar Systems

Today\u27s battlefield consists of a blend of humans and machines working together to locate and monitor the enemy. Due to the threat of terrorism, today\u27s enemy can be anyone and they can exist anywhere even in populated cities. Monitoring human activities in an urban environment is a difficult problem due to walls, clutter, and other obstructions. This thesis focused on developing a network of digital noise radar sensors that could operate simultaneously to track humans and non-human targets inside rooms and through walls. The theory, application, and results are discussed throughout this thesis. A noise radar works by cross correlating the received signal with a time delayed replica of the transmit signal. A high correlation indicates a target. A digital noise radar digitizes the transmit and receive signals and accomplishes the correlation in software. A network of three digital noise radars was constructed to triangulate the (x, y) position of a target within a room. The results were presented in two-dimensional graphs. In nine out of ten cases the stationary targets were clearly identified. In eight out of ten cases the stationary targets were located within the range solution of the system, 0.375 m. In the one miss case, the results image indicated the presence of the human target, but the detection was faint and possible to miss. Tests were also accomplished with moving human targets. In these tests the network of radar systems tracked the human target in an empty and cluttered room until the target was out of range. The test results prove that a network of simultaneously operating noise radars can locate and track human and non-human targets within rooms

Comparison of file sanitization techniques in usb based on average file entropy valves

Nowadays, the technology has become so advanced that many electronic gadgets are in every household today. The fast growth of technology today gives the ability for digital devices like smartphones and laptops to have a huge size of storage which is letting people to keep many of their infonnation like contact lists, photos, videos and even personal infonnation. When these infonnation are not useful anymore, users will delete them. However, the growth of technology also letting people to recover back data that has been deleted. In this case, users do not realise that their deleted data can be recovered and then used by unauthorized user. The data deleted is invisible but not gone. This is where file sanitization plays it role. File sanitization is the process of deleting the memory of the content and over write it with a different characters. In this research, the methods chosen to sanitize file are Write Zero, Write Zero Randomly and Write Zero Alternately. All of the techniques will overwrite data with zero. The best technique is chosen based on the comparison of average entropy value of the files after they have been overwritten. Write Zero is the only technique that is provided by many software like WipeFile and BitKiller. There is no software that provide Write Zero Randomly technique except for sanitizing disk using dd. As for that, Write Zero Randomly and proposed technique, Write Zero Alternately are developed using C programming language in Dev-C++. In this research, sanitization with Write Zero has the lowest average entropy value for text document (TXT), Microsoft Word (DOCX) and image (JPG) with 100% of data in the files undergone this technique have been zero-filled compared to Write Zero Randomly and Write Zero Alternately. Next, Write Zero Alternately is more efficient in tenns of average entropy by 4.64 bpB to its closest competitor which is Write Zero Randomly with 5.02 bpB. This shows that Write Zero is the best sanitization method. These file sanitization techniques are important to keep the confidentiality against unauthorized user

Advanced signal processing solutions for ATR and spectrum sharing in distributed radar systems

Previously held under moratorium from 11 September 2017 until 16 February 2022This Thesis presents advanced signal processing solutions for Automatic Target Recognition (ATR) operations and for spectrum sharing in distributed radar systems. Two Synthetic Aperture Radar (SAR) ATR algorithms are described for full- and single-polarimetric images, and tested on the GOTCHA and the MSTAR datasets. The first one exploits the Krogager polarimetric decomposition in order to enhance peculiar scattering mechanisms from manmade targets, used in combination with the pseudo-Zernike image moments. The second algorithm employs the Krawtchouk image moments, that, being discrete defined, provide better representations of targets’ details. The proposed image moments based framework can be extended to the availability of several images from multiple sensors through the implementation of a simple fusion rule. A model-based micro-Doppler algorithm is developed for the identification of helicopters. The approach relies on the proposed sparse representation of the signal scattered from the helicopter’s rotor and received by the radar. Such a sparse representation is obtained through the application of a greedy sparse recovery framework, with the goal of estimating the number, the length and the rotation speed of the blades, parameters that are peculiar for each helicopter’s model. The algorithm is extended to deal with the identification of multiple helicopters flying in formation that cannot be resolved in another domain. Moreover, a fusion rule is presented to integrate the results of the identification performed from several sensors in a distributed radar system. Tests performed both on simulated signals and on real signals acquired from a scale model of a helicopter, confirm the validity of the algorithm. Finally, a waveform design framework for joint radar-communication systems is presented. The waveform is composed by quasi-orthogonal chirp sub-carriers generated through the Fractional Fourier Transform (FrFT), with the aim of preserving the radar performance of a typical Linear Frequency Modulated (LFM) pulse while embedding data to be sent to a cooperative system. Techniques aimed at optimise the design parameters and mitigate the Inter-Carrier Interference (ICI) caused by the quasiorthogonality of the chirp sub-carriers are also described. The FrFT based waveform is extensively tested and compared with Orthogonal Frequency Division Multiplexing (OFDM) and LFM waveforms, in order to assess both its radar and communication performance.This Thesis presents advanced signal processing solutions for Automatic Target Recognition (ATR) operations and for spectrum sharing in distributed radar systems. Two Synthetic Aperture Radar (SAR) ATR algorithms are described for full- and single-polarimetric images, and tested on the GOTCHA and the MSTAR datasets. The first one exploits the Krogager polarimetric decomposition in order to enhance peculiar scattering mechanisms from manmade targets, used in combination with the pseudo-Zernike image moments. The second algorithm employs the Krawtchouk image moments, that, being discrete defined, provide better representations of targets’ details. The proposed image moments based framework can be extended to the availability of several images from multiple sensors through the implementation of a simple fusion rule. A model-based micro-Doppler algorithm is developed for the identification of helicopters. The approach relies on the proposed sparse representation of the signal scattered from the helicopter’s rotor and received by the radar. Such a sparse representation is obtained through the application of a greedy sparse recovery framework, with the goal of estimating the number, the length and the rotation speed of the blades, parameters that are peculiar for each helicopter’s model. The algorithm is extended to deal with the identification of multiple helicopters flying in formation that cannot be resolved in another domain. Moreover, a fusion rule is presented to integrate the results of the identification performed from several sensors in a distributed radar system. Tests performed both on simulated signals and on real signals acquired from a scale model of a helicopter, confirm the validity of the algorithm. Finally, a waveform design framework for joint radar-communication systems is presented. The waveform is composed by quasi-orthogonal chirp sub-carriers generated through the Fractional Fourier Transform (FrFT), with the aim of preserving the radar performance of a typical Linear Frequency Modulated (LFM) pulse while embedding data to be sent to a cooperative system. Techniques aimed at optimise the design parameters and mitigate the Inter-Carrier Interference (ICI) caused by the quasiorthogonality of the chirp sub-carriers are also described. The FrFT based waveform is extensively tested and compared with Orthogonal Frequency Division Multiplexing (OFDM) and LFM waveforms, in order to assess both its radar and communication performance

Biologically inspired processing of radar and sonar target echoes

Modern radar and sonar systems rely on active sensing to accomplish a variety of tasks, including detection and classification of targets, accurate localization and tracking, autonomous navigation and collision avoidance. Bats have relied on active sensing for over 50 million years and their echolocation system provides remarkable perceptual and navigational performance that are of envy to synthetic systems. The aim of this study is to investigate the mechanisms bats use to process echo acoustic signals and investigate if there are lessons that can be learned and ultimately applied to radar systems. The basic principles of the bat auditory system processing are studied and applied to radio frequencies. A baseband derivative of the Spectrogram Correlation and Transformation (SCAT) model of the bat auditory system, called Baseband SCAT (BSCT), has been developed. The BSCT receiver is designed for processing radio-frequency signals and to allow an analytical treatment of the expected performance. Simulations and experiments have been carried out to confirm that the outputs of interest of both models are “equivalent”. The response of the BSCT to two closely spaced targets is studied and it is shown that the problem of measuring the relative distance between two targets is converted to a problem of measuring the range to a single target. Nearly double improvement in the resolution between two close scatterers is achieved with respect to the matched filter. The robustness of the algorithm has been demonstrated through laboratory measurements using ultrasound and radio frequencies (RF). Pairs of spheres, flat plates and vertical rods were used as targets to represent two main reflectors

Analysis of Ladar Range Resolution Enhancement by Sinusoidal Phase Modulation

The ability of a ladar system to resolve two or more separate returns from a combined echo is related to the effective correlation bandwidth of the pulse emitted by the ladar system. Phase modulation of an outgoing pulse introduces additional frequency components, which increases the effective correlation bandwidth of the pulse and thus improves the range resolution of the system. In this paper, we discuss the general theoretical basis for achieving improved range resolution using a modulated waveform and a matched filter receiver. We then demonstrate these concepts by considering the particular case of improved range resolution for a sinusoidally phase modulated carrier with a rectangular amplitude function. We also perform computer simulations with a realistic pulsed ladar envelope possessing the same modulation function. Our calculations indicate that the resolution of a pulsed ladar system may be improved by a factor of 70 with a phase-modulated pulse and a matched-filter receiver