Design of an easy tunable soft sensor for real-time speed and position estimation of PMSM

Volume 4 Issue 2 (February 2016

Sensorless Control of Switched-Flux Permanent Magnet Machines

This thesis investigates the sensorless control strategies of permanent magnet synchronous machines (PMSMs), with particular reference to switched-flux permanent magnet (SFPM) machines, based on high-frequency signal injection methods for low speed and standstill and the back-EMF based methods for medium and high speeds

Advances in Rotating Electric Machines

It is difficult to imagine a modern society without rotating electric machines. Their use has been increasing not only in the traditional fields of application but also in more contemporary fields, including renewable energy conversion systems, electric aircraft, aerospace, electric vehicles, unmanned propulsion systems, robotics, etc. This has contributed to advances in the materials, design methodologies, modeling tools, and manufacturing processes of current electric machines, which are characterized by high compactness, low weight, high power density, high torque density, and high reliability. On the other hand, the growing use of electric machines and drives in more critical applications has pushed forward the research in the area of condition monitoring and fault tolerance, leading to the development of more reliable diagnostic techniques and more fault-tolerant machines. This book presents and disseminates the most recent advances related to the theory, design, modeling, application, control, and condition monitoring of all types of rotating electric machines

New Hybrid Sensorless Speed of a Non-Salient Pole PMSG Coupled to Wind turbine Using a Modified Switching Algorithm

©2019 ISA. Published by Elsevier Ltd. All rights reserved. his manuscript is made available under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0). For further details please see: https://creativecommons.org/licenses/by-nc-nd/4.0/The paper focuses on the design of position and speed observers for the rotor of a non-salient pole permanent magnet synchronous generator (NSPPMSG) coupled to a wind turbine. With the random nature of wind speed this observer is required to provide a position and speed estimates over a wide speed range. The proposed hybrid structure combines two observers and a switching algorithm to select the appropriate observer based on a modified weighting coefficients method. The first observer is a higher-order sliding mode observer (HOSMO) based on modified super twisting algorithm (STA) with correction term and operates in the medium and nominal wind speed ranges. The second observer is used in the low speed range and is based on the rotor flux estimation and the control by injecting a direct reference current different to zero. The stability of each observer has been successfully assessed using an appropriate Lyapunov function. The simulation results obtained show the effectiveness and performance of the proposed observer and control scheme.Peer reviewe

Sensorless Commissioning and Control of High Anisotropy Synchronous Motor Drives

L'abstract è presente nell'allegato / the abstract is in the attachmen

A comparison of saliency based sensorless control techniques for a PM machine

This thesis analyzes saliency-based sensorless control methods for AC surface mounted permanent magnet machines (PMSM), because PMSMs have features that make them attractive for use in industrial drives: small size, high efficiency, low maintenance, high dynamics, and high power density. The thesis focuses on four different HF injection sensorless methods, which utilize resistance and inductance based saliencies for position estimation: the measurement axis method, the eddy current resistance based saliency tracking method, the eddy current inductance based saliency tracking method, and the PWM switching frequency injection method. The emphasis is in the comparison of the four HF saliency tracking methods under various conditions such as steady state, load impact, speed reversal, and zero and low speed operation. The amplitude and frequency of the injection signals are also compared to choose the best HF injection signal for the four saliency tracking methods. The best sensorless control method using eddy current resistance based saliency is introduced and the experimental results confirm the expected advantages for this sensorless application. This thesis also describes the development and enhancement of current derivative measurement for saliency tracking methods, which uses the stator current transient response to the voltage vectors contained in the fundamental PWM sequence. Due to the HF switching oscillations caused by the switching of the IGBT and parasitic capacitance, the accuracy of the current measurement is reduced and requires a minimum vector time of approximately 6µs. A signal processing algorithm is proposed which uses current samples during the high frequency current oscillations, and can potentially reduce this minimum pulse time

EFFICIENCY AND RELIABILITY ENHANCEMENT OF MULTIPHASE SYNCHRONOUS MOTOR DRIVES

Multiphase electric machines are attractive in comparison with three-phase ones due to advantages such as fault-tolerant nature, smaller rating per phase and lower torque ripple. More specifically, the machines with multiple three-phase windings are particularly convenient, because they are suitable for standard off-the-shelf three-phase dc/ac converter modules. For instance, they are becoming a serious option for applications such as electric vehicles and wind turbines. On the other hand, in these applications, operation at low power is often required for long time intervals; hence, improving the efficiency under such conditions is highly desired and could save a significant amount of energy in the long term. This dissertation proposes a method to enhance the efficiency of electric drives based on multiple three-phase windings at light load. The number of active legs is selected depending on the required torque at each instant. To ensure that the overall efficiency is effectively optimized, not only the converter losses, but also the stator copper losses, are taken into account. Experimental results verify the theoretical outcomes. Surface-mounted permanent-magnet synchronous motors (SPMSMs) require a position measurement to ensure a high-performance control. To avoid the cost and maintenance associated to position sensors, sensorless methods are often preferred. The approaches based on high-frequency signal injection are currently a well-established solution to obtain an accurate position estimation in SPMSMs. These techniques can be roughly divided into two groups: those based on sinusoidal or on square-wave high-frequency signals. The main drawback of the former is the limitation on the response speed, due to the presence of several low-pass filters (LPFs). On the other hand, the latter methods are sensitive to deadtime effects, and high-frequency closed-loop current control is required to overcome it. This dissertation proposes to improve the sensorless strategies based on sinusoidal high-frequency injection by simplifying the scheme employed to extract the information about the position error. Namely, two LPFs and several multiplications are removed. Such simplification does not only reduce the computational complexity, but also permits to obtain a faster response to the changes in the angle/speed, and hence, a faster closed-loop control. Experimental results based on a SPMSM prove the enhanced functionality of the proposed method with respect to the previous ones based on high-frequency sinusoidal signal injection