Price-Based Controller for Utility-Aware HTTP Adaptive Streaming

HTTP Adaptive Streaming (HAS) permits to efficiently deliver video to multiple heterogenous users in a fully distributed way. This might however lead to unfair bandwidth utilization among HAS users. Therefore, network-assisted HAS systems have been proposed where network elements operate alongside with the clients adaptation logic for improving users satisfaction. However, current solutions rely on the assumption that network elements have full knowledge of the network status, which is not always realistic. In this work, we rather propose a practical network-assisted HAS system where the network elements infer the network link congestion using measurements collected from the client endpoints, the congestion level signal is then used by the clients to optimize their video data requests. Our novel controller maximizes the overall users satisfaction and the clients share the available bandwidth fairly from a utility perspective, as demonstrated by simulation results obtained on a network simulator

Optimizing on-demand resource deployment for peer-assisted content delivery (PhD thesis)

Increasingly, content delivery solutions leverage client resources in exchange for service in a peer-to-peer (P2P) fashion. Such peer-assisted service paradigms promise significant infrastructure cost reduction, but suffer from the unpredictability associated with client resources, which is often exhibited as an imbalance between the contribution and consumption of resources by clients. This imbalance hinders the ability to guarantee a minimum service fidelity of these services to the clients. In this thesis, we propose a novel architectural service model that enables the establishment of higher fidelity services through (1) coordinating the content delivery to optimally utilize the available resources, and (2) leasing the least additional cloud resources, available through special nodes (angels) that join the service on-demand, and only if needed, to complement the scarce resources available through clients. While the proposed service model can be deployed in many settings, this thesis focuses on peer-assisted content delivery applications, in which the scarce resource is typically the uplink capacity of clients. We target three applications that require the delivery of fresh as opposed to stale content. The first application is bulk-synchronous transfer, in which the goal of the system is to minimize the maximum distribution time -- the time it takes to deliver the content to all clients in a group. The second application is live streaming, in which the goal of the system is to maintain a given streaming quality. The third application is Tor, the anonymous onion routing network, in which the goal of the system is to boost performance (increase throughput and reduce latency) throughout the network, and especially for bandwidth-intensive applications. For each of the above applications, we develop mathematical models that optimally allocate the already available resources. They also optimally allocate additional on-demand resource to achieve a certain level of service. Our analytical models and efficient constructions depend on some simplifying, yet impractical, assumptions. Thus, inspired by our models and constructions, we develop practical techniques that we incorporate into prototypical peer-assisted angel-enabled cloud services. We evaluate those techniques through simulation and/or implementation. (Major Advisor: Azer Bestavros

Optimizing on-demand resource deployment for peer-assisted content delivery

Increasingly, content delivery solutions leverage client resources in exchange for services in a pee-to-peer (P2P) fashion. Such peer-assisted service paradigm promises significant infrastructure cost reduction, but suffers from the unpredictability associated with client resources, which is often exhibited as an imbalance between the contribution and consumption of resources by clients. This imbalance hinders the ability to guarantee a minimum service fidelity of these services to clients especially for real-time applications where content can not be cached. In this thesis, we propose a novel architectural service model that enables the establishment of higher fidelity services through (1) coordinating the content delivery to efficiently utilize the available resources, and (2) leasing the least additional cloud resources, available through special nodes (angels) that join the service on-demand, and only if needed, to complement the scarce resources available through clients. While the proposed service model can be deployed in many settings, this thesis focuses on peer-assisted content delivery applications, in which the scarce resource is typically the upstream capacity of clients. We target three applications that require the delivery of real-time as opposed to stale content. The first application is bulk-synchronous transfer, in which the goal of the system is to minimize the maximum distribution time - the time it takes to deliver the content to all clients in a group. The second application is live video streaming, in which the goal of the system is to maintain a given streaming quality. The third application is Tor, the anonymous onion routing network, in which the goal of the system is to boost performance (increase throughput and reduce latency) throughout the network, and especially for clients running bandwidth-intensive applications. For each of the above applications, we develop analytical models that efficiently allocate the already available resources. They also efficiently allocate additional on-demand resource to achieve a certain level of service. Our analytical models and efficient constructions depend on some simplifying, yet impractical, assumptions. Thus, inspired by our models and constructions, we develop practical techniques that we incorporate into prototypical peer-assisted angel-enabled cloud services. We evaluate these techniques through simulation and/or implementation

Security for 5G Mobile Wireless Networks

The advanced features of 5G mobile wireless network systems yield new security requirements and challenges. This paper presents a comprehensive survey on security of 5G wireless network systems compared to the traditional cellular networks. The paper starts with a review on 5G wireless networks particularities as well as on the new requirements and motivations of 5G wireless security. The potential attacks and security services with the consideration of new service requirements and new use cases in 5G wireless networks are then summarized. The recent development and the existing schemes for the 5G wireless security are presented based on the corresponding security services including authentication, availability, data confidentiality, key management and privacy. The paper further discusses the new security features involving different technologies applied to 5G such as heterogeneous networks, device-to-device communications, massive multiple-input multiple-output, software defined networks and Internet of Things. Motivated by these security research and development activities, we propose a new 5G wireless security architecture, based on which the analysis of identity management and flexible authentication is provided. As a case study, we explore a handover procedure as well as a signaling load scheme to show the advantage of the proposed security architecture. The challenges and future directions of 5G wireless security are finally summarized

Angels In the Cloud – A Peer-Assisted Bulk-Synchronous Content Distribution Service

Leveraging client upload capacity through peer-assisted content distribution was shown to decrease the load on content providers, while also improving average distribution times. These benefits, however, are limited by the disparity between client upload and download speeds, especially in scenarios requiring a minimum distribution time (MDT) of a piece of content to a set of clients. Achieving MDT is crucial for bulk-synchronous applications, when every client in a set must wait for all other clients in the set to finish their downloads before being able to make use of the downloaded content. In this paper, we propose the use of dedicated servers, which we call angels to accelerate peer-assisted content distribution in general, and to minimize MDT in particular. An angel is not itself the content origin, nor is it interested in fully downloading the content; its only purpose is to enable a peer-assisted content distribution scheme to approach the theoretical lower-bound for MDT. To overcome scalability issues inherent in an optimal MDT construction, we propose and evaluate a content exchange strategy involving angels, which we call "Group Tree". In addition to simulation results that demonstrate the near optimal performance of our proposed approach, we present the architecture and implementation of CloudAngels – a service that allows the elastic, on-the-fly deployment of angels (in the cloud) to assist a content provider (off the cloud) in realizing its MDT objective

System analysis of a Peer-to-Peer Video-on-Demand architecture : Kangaroo

Architectural design and deployment of Peer-to-Peer Video-on-Demand (P2PVoD) systems which support VCR functionalities is attracting the interest of an increasing number of research groups within the scientific community; especially due to the intrinsic characteristics of such systems and the benefits that peers could provide at reducing the server load. This work focuses on the performance analysis of a P2P-VoD system considering user behaviors obtained from real traces together with other synthetic user patterns. The experiments performed show that it is feasible to achieve a performance close to the best possible. Future work will consider monitoring the physical characteristics of the network in order to improve the design of different aspects of a VoD system.El disseny arquitectònic i el desplegament de sistemes de Vídeo sota Demanda "Peer-to-Peer" que soporten funcionalitats VCR està captant l'interès d'un nombre creixent de grups de recerca a la comunitat científica, degut especialment a les característiques intrínsiques dels mencionats sistemes i als beneficis que els peers podrien proporcionar a la reducció de la càrrega en el servidor. Aquest treball tracta l'anàlisi del rendiment d'un sistema P2P-VoD considerant el comportament d'usuaris obtingut amb traçes reals i amb patrons sintètics. Els experiments realitzats mostren que és viable assolir un rendiment proper al cas més óptim. Com treball futur es considerarà la monitorització de les característiques físiques de la xarxa per a poder millorar el disseny dels diferents aspectes que formen un sistema de VoD.El diseño arquitectónico y el despliegue de sistemas de Video bajo Demanda "Peer-to-Peer" que soportan funcionalidades VCR está captando el interés de un número creciente de grupos de investigación dentro de la comunidad científica; especialmente debido a las características intrínsecas de tales sistemas y a los beneficios que los peers podrían proporcionar en la reducción de la carga en el servidor. Este trabajo se enfoca en el análisis de rendimiento de un sistema P2PVoD considerando el comportamiento de usuarios obtenido de trazas reales, junto a otros patrones sintéticos. Los experimentos realizados muestran que es viable lograr un rendimiento cercano al caso más óptimo. El trabajo futuro considerará la monitorización de las características físicas de la red para poder mejorar el diseño de los diferentes aspectos que conforman un sistema de VoD

The interdisciplinary conceptual design of buildings

The Interdisciplinary Conceptual Design of Buildings Design activity during the conceptual phase of building projects is dynamic, vibrant and as a result, chaotic in appearance. This problem is compounded by the fact that iterative, or cyclic, design progression is often criticised, with the concept of 'going round in circles' being one that is discouraged. However, designbis a learning activity and, owing to the complexity of contemporary building projects,it is often only by moving ahead to improve knowledge, before taking a step back to re-address a problem with improved understanding, that the design process can progress. Today's design professionals are being urged to undertake early design activity in a more programmable, and thus manageable fashion. As such, it is becoming increasingly apparent that designers have little, if any, shared understanding of what conceptual design actually involves, let alone a deeper knowledge of the structure of iterative progression. This can, and is, causing problems for the industry, as the lack of both common understanding and synchronisation in interdisciplinary thinking is resulting in design team fragmentation and adversarial relationships. By modelling design activity it is possible to simplify, and thus ease understanding of, its complexities. The development and trialling of a generic framework of design phases and activities has allowed a simple graphical means of recording and displaying patterns of design progression to be devised. The models produced have been used to study and analyse the patterns of iterative working, the output of which has enabled a clarification of conceptual design practice to be achieved. A web-based design system has been developed from the paper-based framework. This accords well with the richly iterative and often non-linear process which design typically follows and is intended to encourage creativity without imposing a rigid procedure. The tool offers alternative routes through conceptual design, and contains 'Team Thinking Tools' to help designers widen the solution space, set priorities and evaluate options. In addition, it promotes effective teamwork practices to help teams deal with social interactions. Also, at the user's option, the system can be used to capture, store and retrieve decisions made, and the reasoning behind them. This is of key importance in improving the performance of the industry as a whole, for it is only by understanding how the final product is influenced by early design activity, that the design process can be adapted to take account of these issues on future projects

Life-cycle management and placement of service function chains in MEC-enabled 5G networks

Recent advancements in mobile communication technology have led to the fifth generation of mobile cellular networks (5G), driven by the proliferation in data traffic demand, stringent latency requirements, and the desire for a fully connected world. This transformation calls for novel technology solutions such as Multi-access Edge Computing (MEC) and Network Function Virtualization (NFV) to satisfy service requirements while providing dynamic and instant service deployment. MEC and NFV are two principal and complementary enablers for 5G networks whose co-existence can lead to numerous benefits. Despite the numerous advantages MEC offers, physical resources at the edge are extremely scarce and require efficient utilization. In this doctoral dissertation, we first attempt to optimize resource utilization at the network edge for the scenario of live video streaming. We specifically utilize the real-time Radio Access Network (RAN) information available at the MEC servers to develop a machine learning-based prediction solution and anticipate user requests. Consequently, Integer Linear Programming (ILP) models are used to prefetch/cache video contents from a centralized video server. Regarding the advantages of NFV technology for the deployment of NFs, the second problem that this dissertation address is the proper association of the users to the gNBs along with efficient placement of SFCs on the substrate network. Our primary purpose is to find a proper embedding of the SFC in a hierarchical 5G network. The problem is formulated as a Mixed Integer Linear Programming (MILP) model, having the objective to minimize service provisioning cost, link utilization, and the effect of VNF migration on users' perceived quality of experience. After rigorously analyzing the proposed SFC placement and considering mobile networks' dynamicity, our next goal is to develop an ILP-based model that minimizes the resource provisioning cost by dynamically embed and scale SFCs so that provisioning cost is minimized while user requirements are met