72,170 research outputs found
Direction-of-Arrival Estimation Based on Sparse Recovery with Second-Order Statistics
Traditional direction-of-arrival (DOA) estimation techniques perform Nyquist-rate sampling of the received signals and as a result they require high storage. To reduce sampling ratio, we introduce level-crossing (LC) sampling which captures samples whenever the signal crosses predetermined reference levels, and the LC-based analog-to-digital converter (LC ADC) has been shown to efficiently sample certain classes of signals. In this paper, we focus on the DOA estimation problem by using second-order statistics based on the LC samplings recording on one sensor, along with the synchronous samplings of the another sensors, a sparse angle space scenario can be found by solving an minimization problem, giving the number of sources and their DOA's. The experimental results show that our proposed method, when compared with some existing norm-based constrained optimization compressive sensing (CS) algorithms, as well as subspace method, improves the DOA estimation performance, while using less samples when compared with Nyquist-rate sampling and reducing sensor activity especially for long time silence signal
Method and apparatus for frequency spectrum analysis
A method for frequency spectrum analysis of an unknown signal in real-time is discussed. The method is based upon integration of 1-bit samples of signal voltage amplitude corresponding to sine or cosine phases of a controlled center frequency clock which is changed after each integration interval to sweep the frequency range of interest in steps. Integration of samples during each interval is carried out over a number of cycles of the center frequency clock spanning a number of cycles of an input signal to be analyzed. The invention may be used to detect the frequency of at least two signals simultaneously. By using a reference signal of known frequency and voltage amplitude (added to the two signals for parallel processing in the same way, but in a different channel with a sampling at the known frequency and phases of the reference signal), the absolute voltage amplitude of the other two signals may be determined by squaring the sine and cosine integrals of each channel and summing the squares to obtain relative power measurements in all three channels and, from the known voltage amplitude of the reference signal, obtaining an absolute voltage measurement for the other two signals by multiplying the known voltage of the reference signal with the ratio of the relative power of each of the other two signals to the relative power of the reference signal
Edaq530: a transparent, open-end and open-source measurement solution in natural science education
We present Edaq530, a low-cost, compact and easy-to-use digital measurement
solution consisting of a thumb-sized USB-to-sensor interface and a measurement
software. The solution is fully open-source, our aim being to provide a viable
alternative to professional solutions. Our main focus in designing Edaq530 has
been versatility and transparency. In this paper, we shall introduce the
capabilities of Edaq530, complement it by showing a few sample experiments, and
discuss the feedback we have received in the course of a teacher training
workshop in which the participants received personal copies of Edaq530 and
later made reports on how they could utilise Edaq530 in their teaching
Data driven sampling of oscillating signals
The reduction of the number of samples is a key issue in signal processing
for mobile applications. We investigate the link between the smoothness
properties of a signal and the number of samples that can be obtained through a
level crossing sampling procedure. The algorithm is analyzed and an upper bound
of the number of samples is obtained in the worst case. The theoretical results
are illustrated with applications to fractional Brownian motions and the
Weierstrass function
A FPGA system for QRS complex detection based on Integer Wavelet Transform
Due to complexity of their mathematical computation, many QRS detectors are implemented in software and cannot operate in real time. The paper presents a real-time hardware based solution for this task. To filter ECG signal and to extract QRS complex it employs the Integer Wavelet Transform. The system includes several components and is incorporated in a single FPGA chip what makes it suitable for direct embedding in medical instruments or wearable health care devices. It has sufficient accuracy (about 95%), showing remarkable noise immunity and low cost. Additionally, each system component is composed of several identical blocks/cells what makes the design highly generic. The capacity of today existing FPGAs allows even dozens of detectors to be placed in a single chip. After the theoretical introduction of wavelets and the review of their application in QRS detection, it will be shown how some basic wavelets can be optimized for easy hardware implementation. For this purpose the migration to the integer arithmetic and additional simplifications in calculations has to be done. Further, the system architecture will be presented with the demonstrations in both, software simulation and real testing. At the end, the working performances and preliminary results will be outlined and discussed. The same principle can be applied with other signals where the hardware implementation of wavelet transform can be of benefit
High-resolution distributed sampling of bandlimited fields with low-precision sensors
The problem of sampling a discrete-time sequence of spatially bandlimited
fields with a bounded dynamic range, in a distributed,
communication-constrained, processing environment is addressed. A central unit,
having access to the data gathered by a dense network of fixed-precision
sensors, operating under stringent inter-node communication constraints, is
required to reconstruct the field snapshots to maximum accuracy. Both
deterministic and stochastic field models are considered. For stochastic
fields, results are established in the almost-sure sense. The feasibility of
having a flexible tradeoff between the oversampling rate (sensor density) and
the analog-to-digital converter (ADC) precision, while achieving an exponential
accuracy in the number of bits per Nyquist-interval per snapshot is
demonstrated. This exposes an underlying ``conservation of bits'' principle:
the bit-budget per Nyquist-interval per snapshot (the rate) can be distributed
along the amplitude axis (sensor-precision) and space (sensor density) in an
almost arbitrary discrete-valued manner, while retaining the same (exponential)
distortion-rate characteristics. Achievable information scaling laws for field
reconstruction over a bounded region are also derived: With N one-bit sensors
per Nyquist-interval, Nyquist-intervals, and total network
bitrate (per-sensor bitrate ), the maximum pointwise distortion goes to zero as
or . This is shown to be possible
with only nearest-neighbor communication, distributed coding, and appropriate
interpolation algorithms. For a fixed, nonzero target distortion, the number of
fixed-precision sensors and the network rate needed is always finite.Comment: 17 pages, 6 figures; paper withdrawn from IEEE Transactions on Signal
Processing and re-submitted to the IEEE Transactions on Information Theor
(k,q)-Compressed Sensing for dMRI with Joint Spatial-Angular Sparsity Prior
Advanced diffusion magnetic resonance imaging (dMRI) techniques, like
diffusion spectrum imaging (DSI) and high angular resolution diffusion imaging
(HARDI), remain underutilized compared to diffusion tensor imaging because the
scan times needed to produce accurate estimations of fiber orientation are
significantly longer. To accelerate DSI and HARDI, recent methods from
compressed sensing (CS) exploit a sparse underlying representation of the data
in the spatial and angular domains to undersample in the respective k- and
q-spaces. State-of-the-art frameworks, however, impose sparsity in the spatial
and angular domains separately and involve the sum of the corresponding sparse
regularizers. In contrast, we propose a unified (k,q)-CS formulation which
imposes sparsity jointly in the spatial-angular domain to further increase
sparsity of dMRI signals and reduce the required subsampling rate. To
efficiently solve this large-scale global reconstruction problem, we introduce
a novel adaptation of the FISTA algorithm that exploits dictionary
separability. We show on phantom and real HARDI data that our approach achieves
significantly more accurate signal reconstructions than the state of the art
while sampling only 2-4% of the (k,q)-space, allowing for the potential of new
levels of dMRI acceleration.Comment: To be published in the 2017 Computational Diffusion MRI Workshop of
MICCA
- …