Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Clock Generator Circuits for Low-Power Heterogeneous Multiprocessor Systems-on-Chip

In this work concepts and circuits for local clock generation in low-power heterogeneous multiprocessor systems-on-chip (MPSoCs) are researched and developed. The targeted systems feature a globally asynchronous locally synchronous (GALS) clocking architecture and advanced power management functionality, as for example fine-grained ultra-fast dynamic voltage and frequency scaling (DVFS). To enable this functionality compact clock generators with low chip area, low power consumption, wide output frequency range and the capability for ultra-fast frequency changes are required. They are to be instantiated individually per core. For this purpose compact all digital phase-locked loop (ADPLL) frequency synthesizers are developed. The bang-bang ADPLL architecture is analyzed using a numerical system model and optimized for low jitter accumulation. A 65nm CMOS ADPLL is implemented, featuring a novel active current bias circuit which compensates the supply voltage and temperature sensitivity of the digitally controlled oscillator (DCO) for reduced digital tuning effort. Additionally, a 28nm ADPLL with a new ultra-fast lock-in scheme based on single-shot phase synchronization is proposed. The core clock is generated by an open-loop method using phase-switching between multi-phase DCO clocks at a fixed frequency. This allows instantaneous core frequency changes for ultra-fast DVFS without re-locking the closed loop ADPLL. The sensitivity of the open-loop clock generator with respect to phase mismatch is analyzed analytically and a compensation technique by cross-coupled inverter buffers is proposed. The clock generators show small area (0.0097mm2 (65nm), 0.00234mm2 (28nm)), low power consumption (2.7mW (65nm), 0.64mW (28nm)) and they provide core clock frequencies from 83MHz to 666MHz which can be changed instantaneously. The jitter performance is compliant to DDR2/DDR3 memory interface specifications. Additionally, high-speed clocks for novel serial on-chip data transceivers are generated. The ADPLL circuits have been verified successfully by 3 testchip implementations. They enable efficient realization of future low-power MPSoCs with advanced power management functionality in deep-submicron CMOS technologies.In dieser Arbeit werden Konzepte und Schaltungen zur lokalen Takterzeugung in heterogenen Multiprozessorsystemen (MPSoCs) mit geringer Verlustleistung erforscht und entwickelt. Diese Systeme besitzen eine global-asynchrone lokal-synchrone Architektur sowie Funktionalität zum Power Management, wie z.B. das feingranulare, schnelle Skalieren von Spannung und Taktfrequenz (DVFS). Um diese Funktionalität zu realisieren werden kompakte Taktgeneratoren benötigt, welche eine kleine Chipfläche einnehmen, wenig Verlustleitung aufnehmen, einen weiten Bereich an Ausgangsfrequenzen erzeugen und diese sehr schnell ändern können. Sie sollen individuell pro Prozessorkern integriert werden. Dazu werden kompakte volldigitale Phasenregelkreise (ADPLLs) entwickelt, wobei eine bang-bang ADPLL Architektur numerisch modelliert und für kleine Jitterakkumulation optimiert wird. Es wird eine 65nm CMOS ADPLL implementiert, welche eine neuartige Kompensationsschlatung für den digital gesteuerten Oszillator (DCO) zur Verringerung der Sensitivität bezüglich Versorgungsspannung und Temperatur beinhaltet. Zusätzlich wird eine 28nm CMOS ADPLL mit einer neuen Technik zum schnellen Einschwingen unter Nutzung eines Phasensynchronisierers realisiert. Der Prozessortakt wird durch ein neuartiges Phasenmultiplex- und Frequenzteilerverfahren erzeugt, welches es ermöglicht die Taktfrequenz sofort zu ändern um schnelles DVFS zu realisieren. Die Sensitivität dieses Frequenzgenerators bezüglich Phasen-Mismatch wird theoretisch analysiert und durch Verwendung von kreuzgekoppelten Taktverstärkern kompensiert. Die hier entwickelten Taktgeneratoren haben eine kleine Chipfläche (0.0097mm2 (65nm), 0.00234mm2 (28nm)) und Leistungsaufnahme (2.7mW (65nm), 0.64mW (28nm)). Sie stellen Frequenzen von 83MHz bis 666MHz bereit, welche sofort geändert werden können. Die Schaltungen erfüllen die Jitterspezifikationen von DDR2/DDR3 Speicherinterfaces. Zusätzliche können schnelle Takte für neuartige serielle on-Chip Verbindungen erzeugt werden. Die ADPLL Schaltungen wurden erfolgreich in 3 Testchips erprobt. Sie ermöglichen die effiziente Realisierung von zukünftigen MPSoCs mit Power Management in modernsten CMOS Technologien

메모리 인터페이스를 위한 4 레벨 펄스 진폭 변조 쿼터 레이트 수신기 설계

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2022. 8. 김수환.본 연구에서는 메모리 인터페이스를 위한 4 레벨 펄스 진폭 변조 (PAM-4) 수신기와 직교 클록을 생성하는 직교 신호 보정기를 제안된다. 데이터 센터에서 증가하는 IP 트래픽은 고속 및 저전력 메모리 인터페이스에 대한 수요를 증가시켜왔다. 이러한 요구를 만족시키기 위해 클럭 및 나이퀴스트 주파수를 높이지 않고도 데이터 전송률을 높일 수 있는 PAM-4 신호가 주목을 받고 있다. PAM-4 신호는 제로 비 복귀 신호 (NRZ) 보다 3배 낮은 수직 마진을 가지며, 이는 결정 피드백 이퀄라이저 내 슬라이스의 클럭-큐 딜레이를 증가시키며, 이로 인해 PAM-4 결정 피드백 이퀄라이저의 성능을 제한하는 요인이다. 본 연구에서는 인버터 기반의 합산기를 이용, 선택적으로 신호를 증폭시키는 결정 피드백 이퀄라이저를 사용함으로써 슬라이서의 전력 소모를 증가시키지 않으면서 슬라이서의 클럭-큐 딜레이를 줄일 수 있다. 또한, 적응형 지연 이득 컨트롤러를 포함하는 직교 신호 보정기는 높은 정확도와 빠른 스큐 보정으로 쿼드러처 클럭 간의 스큐를 교정할 수 있다. 선택적 눈 증폭 결정 피드백 이퀄라이저와 적응형 지연 이득 컨트롤러를 포함하는 직교 신호 보정기의 성능을 검증하기 위해 프로토타입 칩을 제작하였다. 제작된 칩은 65 nm CMOS 공정으로 제작되었다. 프로토타입 칩은 24 Gb/s/pin 에서 10-12 의 비트 에러율을 100 mUI 의 신호 너비로 달성하였다. 프로토타입 칩 내 PAM-4 수신기는 0.73 pJ/b 의 에너지 효율을 갖는다. 또한 적응형 지연 이득 컨트롤러를 포함하는 직교 신호 보정기는 3 GHz 쿼드러처 클럭 간 최대 21.2 ps 의 스큐를 0.8 ps 까지 줄일 수 있으며, 이 때 76.9 ns 의 교정 시간을 갖는다. 제안하는 직교 신호 보정기는 3 GHz 에서 2.15 mW/GHz 의 전력 효율을 갖는다.A four-level pulse amplitude modulation (PAM-4) receiver, and a quadrature signal corrector (QSC) that generates quadrature clocks for memory interfaces is presented. Increasing IP traffic in data centers has increased the demand for high-speed and low-power memory interfaces. To satisfy this demand, PAM-4 signaling, which can increase data-rate without increasing clock and Nyquist frequency, is received considerable attention. PAM- signaling has vertical which three times lower than non-return-to-zero (NRZ) signaling, which makes the clock-to-Q delay of the slicer in the decision feedback equalizer (DFE) increases. This makes the DFE difficult to satisfy the timing constraint. In this paper, by using a DFE with inverter-based summers, the clock-to-Q delay of the slicer can be reduced without increasing the power consumption of the slicers. Also, the QSC using an adaptive delay gain controller can correct the skew between the quadrature clock with low skew and short correction time. The prototype receiver including the DFE with the inverter-based summer and the QSC using the adaptive delay gain controller was fabricated in 65 nm CMOS process. The prototype chip can achieve a bit error rate (BER) of 10-12 at 24 Gb/s/pin, and at this time, an eye width of 100 mUI is secured. The efficiency of the receiver is 0.73 pJ/b. In addition, the QSC cna reduce the maximum 21.2 ps of skew between 3 GHz quadrature clocks to 0.8 ps and has a correction time of 76.9 ns. The efficiency of the QSC is 2.15 mW/GHz.ABSTRACT 1 CONTENTS 3 LIST OF FIGURES 5 LIST OF TABLE 9 CHAPTER 1 1 INTRODUCTION 1 1.1 MOTIVATION 1 1.2 PAM-4 SIGNALING 7 1.2.1 DESIGN CONSIDERATIONS ON PAM-4 RECEIVER 10 1.2.2 PRIOR WORKS 14 1.3 QUARTER-RATE ARCHITECTURE 18 1.3.1 DESIGN CONSIDERATION ON QUARTER-RATE ARCHITECTURE 20 1.3.2 PRIOR WORKS 25 1.4 SUMMARY 28 1.5 THESIS ORGANIZATION 30 CHAPTER 2 31 CONCEPTS OF DFE WITH INVERTER-BASED SUMMER 31 2.1 CONCEPTUAL ARCHITECTURE OF DFE WITH INVERTER-BASED SUMMER 32 2.2 DESIGN CONSIDERATION OF INVERTER-BASED SUMMER 37 CHAPTER 3 41 CONCEPTS OF QUADRATURE SIGNAL CORRECTOR USING ADAPTIVE DELAY GAIN CONTROLLER 41 3.1 OPERATION OF PROPOSED QUADRATURE SIGNAL CORRECTOR 42 3.2 LOOP FILTER INCLUDING ADAPTIVE DELAY GAIN CONTROLLER 45 CHAPTER 4 48 ARCHITECTURE AND IMPLEMENTATION 48 4.1 OVERALL ARCHITECTURE 49 4.2 ANALOG FRONT END 52 4.3 DECISION FEEDBACK EQUALIZER WITH INVERTER-BASED SUMMER 54 4.4 CLOCK PATH 62 4.5 QUADRATURE SIGNAL CORRECTOR WITH ADAPTIVE DELAY GAIN CONTROLLER 63 CHAPTER 5 70 EXPERIMENTAL RESULTS 70 5.1 EXPERIMENTAL SETUP 70 5.2 EXPERIMENTAL RESULTS 74 5.2.1 MEASUREMENT RESULTS OF PAM-4 RECEIVER WITH DECISION FEEDBACK EQUALIZER USING INVERTER-BASED SUMMER 74 5.2.2 MEASUREMENT RESULTS OF QUADRATURE SIGNAL CORRECTOR USING ADAPTIVE DELAY GAIN CONTROLLER 77 CHAPTER 6 83 CONCLUSION 83 BIBLIOGRAPHY 86박

Source-synchronous I/O Links using Adaptive Interface Training for High Bandwidth Applications

Mobility is the key to the global business which requires people to be always connected to a central server. With the exponential increase in smart phones, tablets, laptops, mobile traffic will soon reach in the range of Exabytes per month by 2018. Applications like video streaming, on-demand-video, online gaming, social media applications will further increase the traffic load. Future application scenarios, such as Smart Cities, Industry 4.0, Machine-to-Machine (M2M) communications bring the concepts of Internet of Things (IoT) which requires high-speed low power communication infrastructures. Scientific applications, such as space exploration, oil exploration also require computing speed in the range of Exaflops/s by 2018 which means TB/s bandwidth at each memory node. To achieve such bandwidth, Input/Output (I/O) link speed between two devices needs to be increased to GB/s. The data at high speed between devices can be transferred serially using complex Clock-Data-Recovery (CDR) I/O links or parallely using simple source-synchronous I/O links. Even though CDR is more efficient than the source-synchronous method for single I/O link, but to achieve TB/s bandwidth from a single device, additional I/O links will be required and the source-synchronous method will be more advantageous in terms of area and power requirements as additional I/O links do not require extra hardware resources. At high speed, there are several non-idealities (Supply noise, crosstalk, Inter- Symbol-Interference (ISI), etc.) which create unwanted skew problem among parallel source-synchronous I/O links. To solve these problems, adaptive trainings are used in time domain to synchronize parallel source-synchronous I/O links irrespective of these non-idealities. In this thesis, two novel adaptive training architectures for source-synchronous I/O links are discussed which require significantly less silicon area and power in comparison to state-of-the-art architectures. First novel adaptive architecture is based on the unit delay concept to synchronize two parallel clocks by adjusting the phase of one clock in only one direction. Second novel adaptive architecture concept consists of Phase Interpolator (PI)-based Phase Locked Loop (PLL) which can adjust the phase in both direction and achieve faster synchronization at the expense of added complexity. With an increase in parallel I/O links, clock skew which is generated by the improper clock tree, also affects the timing margin. Incorrect duty cycle further reduces the timing margin mainly in Double Data Rate (DDR) systems which are generally used to increase the bandwidth of a high-speed communication system. To solve clock skew and duty cycle problems, a novel clock tree buffering algorithm and a novel duty cycle corrector are described which further reduce the power consumption of a source-synchronous system

Hybrid NRZ/Multi-Tone Signaling for High-Speed Low-Power Wireline Transceivers

Over the past few decades, incessant growth of Internet networking traffic and High-Performance Computing (HPC) has led to a tremendous demand for data bandwidth. Digital communication technologies combined with advanced integrated circuit scaling trends have enabled the semiconductor and microelectronic industry to dramatically scale the bandwidth of high-loss interfaces such as Ethernet, backplane, and Digital Subscriber Line (DSL). The key to achieving higher bandwidth is to employ equalization technique to compensate the channel impairments such as Inter-Symbol Interference (ISI), crosstalk, and environmental noise. Therefore, todayâs advanced input/outputs (I/Os) has been equipped with sophisticated equalization techniques to push beyond the uncompensated bandwidth of the system. To this end, process scaling has continually increased the data processing capability and improved the I/O performance over the last 15 years. However, since the channel bandwidth has not scaled with the same pace, the required signal processing and equalization circuitry becomes more and more complicated. Thereby, the energy efficiency improvements are largely offset by the energy needed to compensate channel impairments. In this design paradigm, re-thinking about the design strategies in order to not only satisfy the bandwidth performance, but also to improve power-performance becomes an important necessity. It is well known in communication theory that coding and signaling schemes have the potential to provide superior performance over band-limited channels. However, the choice of the optimum data communication algorithm should be considered by accounting for the circuit level power-performance trade-offs. In this thesis we have investigated the application of new algorithm and signaling schemes in wireline communications, especially for communication between microprocessors, memories, and peripherals. A new hybrid NRZ/Multi-Tone (NRZ/MT) signaling method has been developed during the course of this research. The system-level and circuit-level analysis, design, and implementation of the proposed signaling method has been performed in the frame of this work, and the silicon measurement results have proved the efficiency and the robustness of the proposed signaling methodology for wireline interfaces. In the first part of this work, a 7.5 Gb/s hybrid NRZ/MT transceiver (TRX) for multi-drop bus (MDB) memory interfaces is designed and fabricated in 40 nm CMOS technology. Reducing the complexity of the equalization circuitry on the receiver (RX) side, the proposed architecture achieves 1 pJ/bit link efficiency for a MDB channel bearing 45 dB loss at 2.5 GHz. The measurement results of the first prototype confirm that NRZ/MT serial data TRX can offer an energy-efficient solution for MDB memory interfaces. Motivated by the satisfying results of the first prototype, in the second phase of this research we have exploited the properties of multi-tone signaling, especially orthogonality among different sub-bands, to reduce the effect of crosstalk in high-dense wireline interconnects. A four-channel transceiver has been implemented in a standard CMOS 40 nm technology in order to demonstrate the performance of NRZ/MT signaling in presence of high channel loss and strong crosstalk noise. The proposed system achieves 1 pJ/bit power efficiency, while communicating over a MDB memory channel at 36 Gb/s aggregate data rate

Circuit Techniques for Adaptive and Reliable High Performance Computing.

Increasing power density with process scaling has caused stagnation in the clock speed of modern microprocessors. Accordingly, designers have adopted message passing and shared memory based multicore architectures in order to keep up with the rapidly rising demand for computing throughput. At the same time, applications are not entirely parallel and improving single-thread performance continues to remain critical. Additionally, reliability is also worsening with process scaling, and margining for failures due to process and environmental variations in modern technologies consumes an increasingly large portion of the power/performance envelope. In the wake of multicore computing, reliability of signal synchronization between the cores is also becoming increasingly critical. This forces designers to search for alternate efficient methods to improve compute performance while addressing reliability. Accordingly, this dissertation presents innovative circuit and architectural techniques for variation-tolerance, performance and reliability targeted at datapath logic, signal synchronization and memories. Firstly, a domino logic based design style for datapath logic is presented that uses Adaptive Robustness Tuning (ART) in addition to timing speculation to provide up to 71% performance gains over conventional domino logic in 32bx32b multiplier in 65nm CMOS. Margins are reduced until functionality errors are detected, that are used to guide the tuning. Secondly, for signal synchronization across clock domains, a new class of dynamic logic based synchronizers with single-cycle synchronization latency is presented, where pulses, rather than stable intermediate voltages cause metastability. Such pulses are amplified using skewed inverters to improve mean time between failures by ~1e6x over jamb latches and double flip-flops at 2GHz in 65nm CMOS. Thirdly, a reconfigurable sensing scheme for 6T SRAMs is presented that employs auto-zero calibration and pre-amplification to improve sensing reliability (by up to 1.2 standard deviations of NMOS threshold voltage in 28nm CMOS); this increased reliability is in turn traded for ~42% sensing speedup. Finally, a main memory architecture design methodology to address reliability and power in the context of Exascale computing systems is presented. Based on 3D-stacked DRAMs, the methodology co-optimizes DRAM access energy, refresh power and the increased cost of error resilience, to meet stringent power and reliability constraints.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/107238/1/bharan_1.pd

APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved " or "undefined. " Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. The Intel ® Xeon ® Processor E5-1600 / E5-2600/E5-4600 Product Families, Intel ® C600 series chipset, and the Intel ® Xeon® Processor E5-1600 / E5-2600/E5-4600 Product Families-based Platform described in this document may contain design defects o

Design of High Performance SRAM Based Memory Chip

The semiconductor memory SRAM uses bi-stable latch circuit to store the logic data 1 or 0. It differs from Dynamic RAM (DRAM) which needs periodic refreshment operation for the storage of logic data. Depending upon the frequency of operation SRAM power consumption varies i.e. it consumes very high power at higher frequencies like DRAM. The Cache memory present in the microprocessor needs high speed memory hence SRAM can be used for that purpose in microprocessors. The DRAM is normally used in the Main memory of processors, where importance is given to the density than its speed. The SRAM is also used in industrial subsystems, scientific and automotive electronics. In this thesis 16-Kb Memory is designed by using memory banking method in UMC 90nm technology ,which operates at a frequency of 1GHz.The post layout simulation for the complete design is performed and also obtained power analysis for the overall design. All peripherals like pre-charge, Row Decoder, Word line driver, Sense amplifier, Column Decoder/Mux and write driver are designed and layouts of all the above peripherals also drawn in an optimised manner such that their layout occupies minimum area. The 6T SRAM cell is designed with operating frequency of 8 GHz and stability analysis are also performed for single SRAM cell. The layout of Single SRAM cell is drawn in a symmetric manner, such that two adjacent cells can share same contact, which results reduction in the area of cell layout. The Static Noise Margin, Read noise margin and Write Noise Margin of single cell are found to be 240mV, 115mV and 425mV respectively for a supply voltage of 1V.The effect of pull-up ratio and cell ratio on the stability of SRAM cell is observed

Memory Systems and Interconnects for Scale-Out Servers

The information revolution of the last decade has been fueled by the digitization of almost all human activities through a wide range of Internet services. The backbone of this information age are scale-out datacenters that need to collect, store, and process massive amounts of data. These datacenters distribute vast datasets across a large number of servers, typically into memory-resident shards so as to maintain strict quality-of-service guarantees. While data is driving the skyrocketing demands for scale-out servers, processor and memory manufacturers have reached fundamental efficiency limits, no longer able to increase server energy efficiency at a sufficient pace. As a result, energy has emerged as the main obstacle to the scalability of information technology (IT) with huge economic implications. Delivering sustainable IT calls for a paradigm shift in computer system design. As memory has taken a central role in IT infrastructure, memory-centric architectures are required to fully utilize the IT's costly memory investment. In response, processor architects are resorting to manycore architectures to leverage the abundant request-level parallelism found in data-centric applications. Manycore processors fully utilize available memory resources, thereby increasing IT efficiency by almost an order of magnitude. Because manycore server chips execute a large number of concurrent requests, they exhibit high incidence of accesses to the last-level-cache for fetching instructions (due to large instruction footprints), and off-chip memory (due to lack of temporal reuse in on-chip caches) for accessing dataset objects. As a result, on-chip interconnects and the memory system are emerging as major performance and energy-efficiency bottlenecks in servers. This thesis seeks to architect on-chip interconnects and memory systems that are tuned for the requirements of memory-centric scale-out servers. By studying a wide range of data-centric applications, we uncover application phenomena common in data-centric applications, and examine their implications on on-chip network and off-chip memory traffic. Finally, we propose specialized on-chip interconnects and memory systems that leverage common traffic characteristics, thereby improving server throughput and energy efficiency