Towards Odor-Sensitive Mobile Robots

J. Monroy, J. Gonzalez-Jimenez, "Towards Odor-Sensitive Mobile Robots", Electronic Nose Technologies and Advances in Machine Olfaction, IGI Global, pp. 244--263, 2018, doi:10.4018/978-1-5225-3862-2.ch012 Versión preprint, con permiso del editorOut of all the components of a mobile robot, its sensorial system is undoubtedly among the most critical ones when operating in real environments. Until now, these sensorial systems mostly relied on range sensors (laser scanner, sonar, active triangulation) and cameras. While electronic noses have barely been employed, they can provide a complementary sensory information, vital for some applications, as with humans. This chapter analyzes the motivation of providing a robot with gas-sensing capabilities and also reviews some of the hurdles that are preventing smell from achieving the importance of other sensing modalities in robotics. The achievements made so far are reviewed to illustrate the current status on the three main fields within robotics olfaction: the classification of volatile substances, the spatial estimation of the gas dispersion from sparse measurements, and the localization of the gas source within a known environment

Robotic Gas Source Localization with Probabilistic Mapping and Online Dispersion Simulation

Gas source localization (GSL) with an autonomous robot is a problem with many prospective applications, from finding pipe leaks to emergency-response scenarios. In this work we present a new method to perform GSL in realistic indoor environments, featuring obstacles and turbulent flow. Given the highly complex relationship between the source position and the measurements available to the robot (the single-point gas concentration, and the wind vector) we propose an observation model that derives from contrasting the online, real-time simulation of the gas dispersion from any candidate source localization against a gas concentration map built from sensor readings. To account for a convenient and grounded integration of both into a probabilistic estimation framework, we introduce the concept of probabilistic gas-hit maps, which provide a higher level of abstraction to model the time-dependent nature of gas dispersion. Results from both simulated and real experiments show the capabilities of our current proposal to deal with source localization in complex indoor environments. To the best of our knowledge, this is the first work in olfactory robotics that doesn't make simplistic assumptions about environmental conditions like operating in open spaces and/or having an unrealistic laminar flow wind

Improvement of the sensory and autonomous capability of robots through olfaction: the IRO Project

Proyecto de Excelencia Junta de Andalucía TEP2012-530Olfaction is a valuable source of information about the environment that has not been su ciently exploited in mobile robotics yet. Certainly, odor information can contribute to other sensing modalities, e.g. vision, to successfully accomplish high-level robot activities, such as task planning or execution in human environments. This paper describes the developments carried out in the scope of the IRO project, which aims at making progress in this direction by investigating mechanisms that exploit odor information (usually coming in the form of the type of volatile and its concentration) in problems like object recognition and scene-activity understanding. A distinctive aspect of this research is the special attention paid to the role of semantics within the robot perception and decisionmaking processes. The results of the IRO project have improved the robot capabilities in terms of efciency, autonomy and usefulness.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Information-Driven Gas Distribution Mapping for Autonomous Mobile Robots.

The ability to sense airborne pollutants with mobile robots provides a valuable asset for domains such as industrial safety and environmental monitoring. Oftentimes, this involves detecting how certain gases are spread out in the environment, commonly referred to as a gas distribution map, to subsequently take actions that depend on the collected information. Since the majority of gas transducers require physical contact with the analyte to sense it, the generation of such a map usually involves slow and laborious data collection from all key locations. In this regard, this paper proposes an efficient exploration algorithm for 2D gas distribution mapping with an autonomous mobile robot. Our proposal combines a Gaussian Markov random field estimator based on gas and wind flow measurements, devised for very sparse sample sizes and indoor environments, with a partially observable Markov decision process to close the robot’s control loop. The advantage of this approach is that the gas map is not only continuously updated, but can also be leveraged to choose the next location based on how much information it provides. The exploration consequently adapts to how the gas is distributed during run time, leading to an efficient sampling path and, in turn, a complete gas map with a relatively low number of measurements. Furthermore, it also accounts for wind currents in the environment, which improves the reliability of the final gas map even in the presence of obstacles or when the gas distribution diverges from an ideal gas plume. Finally, we report various simulation experiments to evaluate our proposal against a computer-generated fluid dynamics ground truth, as well as physical experiments in a wind tunnel.Partial funding for open access charge: Universidad de Málag

On the use of autonomous unmanned vehicles in response to hazardous atmospheric release incidents

Recent events have induced a surge of interest in the methods of response to releases of hazardous materials or gases into the atmosphere. In the last decade there has been particular interest in mapping and quantifying emissions for regulatory purposes, emergency response, and environmental monitoring. Examples include: responding to events such as gas leaks, nuclear accidents or chemical, biological or radiological (CBR) accidents or attacks, and even exploring sources of methane emissions on the planet Mars. This thesis presents a review of the potential responses to hazardous releases, which includes source localisation, boundary tracking, mapping and source term estimation. [Continues.]</div

Source term estimation of a hazardous airborne release using an unmanned aerial vehicle

Gaining information about an unknown gas source is a task of great importance with applications in several areas including: responding to gas leaks or suspicious smells, quantifying sources of emissions, or in an emergency response to an industrial accident or act of terrorism. In this paper, a method to estimate the source term of a gaseous release using measurements of concentration obtained from an unmanned aerial vehicle (UAV) is described. The source term parameters estimated include the three dimensional location of the release, its emission rate, and other important variables needed to forecast the spread of the gas using an atmospheric transport and dispersion model. The parameters of the source are estimated by fusing concentration observations from a gas detector on-board the aircraft, with meteorological data and an appropriate model of dispersion. Two models are compared in this paper, both derived from analytical solutions to the advection diffusion equation. Bayes’ theorem, implemented using a sequential Monte Carlo algorithm, is used to estimate the source parameters in order to take into account the large uncertainties in the observations and formulated models. The system is verified with novel, outdoor, fully automated experiments, where observations from the UAV are used to estimate the parameters of a diffusive source. The estimation performance of the algorithm is assessed subject to various flight path configurations and wind speeds. Observations and lessons learned during these unique experiments are discussed and areas for future research are identified

Combining non selective gas sensors on a mobile robot for identification and mapping of multiple chemical compounds

In this paper, we address the task of gas distribution modeling in scenarios where multiple heterogeneous compounds are present. Gas distribution modeling is particularly useful in emission monitoring applications where spatial representations of the gaseous patches can be used to identify emission hot spots. In realistic environments, the presence of multiple chemicals is expected and therefore, gas discrimination has to be incorporated in the modeling process. The approach presented in this work addresses the task of gas distribution modeling by combining different non selective gas sensors. Gas discrimination is addressed with an open sampling system, composed by an array of metal oxide sensors and a probabilistic algorithm tailored to uncontrolled environments. For each of the identified compounds, the mapping algorithm generates a calibrated gas distribution model using the classification uncertainty and the concentration readings acquired with a photo ionization detector. The meta parameters of the proposed modeling algorithm are automatically learned from the data. The approach was validated with a gas sensitive robot patrolling outdoor and indoor scenarios, where two different chemicals were released simultaneously. The experimental results show that the generated multi compound maps can be used to accurately predict the location of emitting gas sources

Enhancement of the Sensory Capabilities of Mobile Robots through Artificial Olfaction

La presente tesis abarca varios aspectos del olfato artificial u olfato robótico, la capacidad de percibir información sobre la composición del aire que rodea a un sistema automático. En primer lugar, se desarrolla una nariz electrónica, un instrumento que combina sensores de gas de bajas prestaciones con un algoritmo de clasificación para medir e identificar gases. Aunque esta tecnología ya existía previamente, se aplica un nuevo enfoque que busca reducir las dimensiones y consumo para poder instalarlas en robots móviles, a la vez que se aumenta el número de gases detectables mediante un diseño modular. Posteriormente, se estudia la estrategia óptima para encontrar fugas de gas con un robot equipado con este tipo de narices electrónicas. Para ello se llevan a cabos varios experimentos basados en teleoperación para entender como afectan los sensores del robot al éxito de la tarea, de lo cual se deriva finalmente un algoritmo para generar con robots autónomos mapas de gas de un entorno dado, el cual se inspira en el comportamiento humano, a saber, maximizar la información conocida sobre el entorno. La principal virtud de este método, además de realizar una exploración óptima del entorno, es su capacidad para funcionar en entornos muy complejos y sujetos a corrientes de vientos mediante un nuevo método que también se presenta en esta tesis. Finalmente, se presentan dos casos de aplicación en los que se identifica de forma automática con una nariz electrónica la calidad subjetiva del aire en entornos urbanos

Information-based search for an atmospheric release using a mobile robot: algorithm and experiments

Finding the location and strength of an unknown hazardous release is of paramount importance in emergency response and environmental monitoring, thus it has been an active research area for several years known as source term estimation. This paper presents a joint Bayesian estimation and planning algorithm to guide a mobile robot to collect informative measurements, allowing the source parameters to be estimated quickly and accurately. The estimation is performed recursively using Bayes’ theorem, where uncertainties in the meteorological and dispersion parameters are considered and the intermittent readings from a low-cost gas sensor are addressed by a novel likelihood function. The planning strategy is designed to maximize the expected utility function based on the estimated information gain of the source parameters. Subsequently, this paper presents the first experimental result of such a system in turbulent, diffusive conditions, in which a ground robot equipped with a low-cost gas sensor responds to the hazardous source stimulated by incense sticks. The experimental results demonstrate the effectiveness of the proposed estimation and search algorithm for source term estimation based on a mobile robot and a low-cost sensor

Drones and Sensors Ecosystem to Maximise the “Storm Effects” in Case of CBRNe Dispersion in Large Geographic Areas

The advancements in the field of robotics, specifically in the aerial robotics, combined with technological improvements of the capability of drones, have increased dramatically the use of these devices as a valuable tool in a wide range of applications. From civil to commercial and military area, the requirements in the emerging application for monitoring complex scenarios that are potentially dangerous for operators give rise to the need of a more powerful and sophisticated approach. This work aims at proposing the use of swarm drones to increase plume detection, tracking and source declaration for chemical releases. The several advantages which this technology may lead to this research and application fields are investigated, as well as the research and technological activities to be performed to make swarm drones efficient, reliable, and accurate