Microrobots for wafer scale microfactory: design fabrication integration and control.

Future assembly technologies will involve higher automation levels, in order to satisfy increased micro scale or nano scale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to micro-electronics and MEMS industries, but less so in nanotechnology. With the bloom of nanotechnology ever since the 1990s, newly designed products with new materials, coatings and nanoparticles are gradually entering everyone’s life, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than with top-down robotic assembly. This is due to considerations of volume handling of large quantities of components, and the high cost associated to top-down manipulation with the required precision. However, the bottom-up manufacturing methods have certain limitations, such as components need to have pre-define shapes and surface coatings, and the number of assembly components is limited to very few. For example, in the case of self-assembly of nano-cubes with origami design, post-assembly manipulation of cubes in large quantities and cost-efficiency is still challenging. In this thesis, we envision a new paradigm for nano scale assembly, realized with the help of a wafer-scale microfactory containing large numbers of MEMS microrobots. These robots will work together to enhance the throughput of the factory, while their cost will be reduced when compared to conventional nano positioners. To fulfill the microfactory vision, numerous challenges related to design, power, control and nanoscale task completion by these microrobots must be overcome. In this work, we study three types of microrobots for the microfactory: a world’s first laser-driven micrometer-size locomotor called ChevBot，a stationary millimeter-size robotic arm, called Solid Articulated Four Axes Microrobot (sAFAM), and a light-powered centimeter-size crawler microrobot called SolarPede. The ChevBot can perform autonomous navigation and positioning on a dry surface with the guidance of a laser beam. The sAFAM has been designed to perform nano positioning in four degrees of freedom, and nanoscale tasks such as indentation, and manipulation. And the SolarPede serves as a mobile workspace or transporter in the microfactory environment

Bio-Inspired Robotics

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field

Modeling, simulation and control of microrobots for the microfactory.

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large quantities of components, and the high cost associated with top-down manipulation requiring precision. However, bottom-up manufacturing methods have certain limitations, such as components needing to have predefined shapes and surface coatings, and the number of assembly components being limited to very few. For example, in the case of self-assembly of nano-cubes with an origami design, post-assembly manipulation of cubes in large quantities and cost-efficiency is still challenging. In this thesis, we envision a new paradigm for nanoscale assembly, realized with the help of a wafer-scale microfactory containing large numbers of MEMS microrobots. These robots will work together to enhance the throughput of the factory, while their cost will be reduced when compared to conventional nanopositioners. To fulfill the microfactory vision, numerous challenges related to design, power, control, and nanoscale task completion by these microrobots must be overcome. In this work, we study two classes of microrobots for the microfactory: stationary microrobots and mobile microrobots. For the stationary microrobots in our microfactory application, we have designed and modeled two different types of microrobots, the AFAM (Articulated Four Axes Microrobot) and the SolarPede. The AFAM is a millimeter-size robotic arm working as a nanomanipulator for nanoparticles with four degrees of freedom, while the SolarPede is a light-powered centimeter-size robotic conveyor in the microfactory. For mobile microrobots, we have introduced the world’s first laser-driven micrometer-size locomotor in dry environments, called ChevBot to prove the concept of the motion mechanism. The ChevBot is fabricated using MEMS technology in the cleanroom, following a microassembly step. We showed that it can perform locomotion with pulsed laser energy on a dry surface. Based on the knowledge gained with the ChevBot, we refined tits fabrication process to remove the assembly step and increase its reliability. We designed and fabricated a steerable microrobot, the SerpenBot, in order to achieve controllable behavior with the guidance of a laser beam. Through modeling and experimental study of the characteristics of this type of microrobot, we proposed and validated a new type of deep learning controller, the PID-Bayes neural network controller. The experiments showed that the SerpenBot can achieve closed-loop autonomous operation on a dry substrate

Wire-driven mechanism and highly efficient propulsion in water.

自然生物的杰出表现往往令人们叹为观止。正因为如此，在机器人研究中对自然界动植物的模仿从未间断。本文受动物肌肉骨骼系统（尤其是蛇的脊柱以及章鱼手臂的肌肉分布）的启发，设计了一种新型的仿生拉线机构。该机构由柔性骨架以及成对拉线组成。柔性骨架提供支撑，拉线模拟肌肉将驱动器的运动和力传递给骨架，并控制骨架运动。从骨架结构分，拉线机构可分为蛇形拉线机构以及连续型拉线机构；从骨架分段来看，拉线机构可分为单段式拉线机构以及多段式拉线机构，其中每段由一或两对拉线控制。拉线机构的主要性能特征包括：大柔性，高度欠驱动，杠杆效应，以及远程传力。机构的柔性使得它可以产生很大的弯曲变形；欠驱动设计极大地减少了驱动器的数目，简化了系统结构；在杠杆效应下，骨架末端速度、加速度与拉线的速度、加速度相比得到数十倍放大；通过拉线将驱动器的运动和力远程传递给执行机构，使得拉线机构结构简单紧凑。基于以上特征，拉线机构不仅适合工作于狭窄空间，同时也适合于摆动推进，尤其是水下推进。论文系统地介绍了拉线机构的设计，运动学，工作空间，静力学以及动力学模型。在常曲率假设下分别建立了蛇形拉线机构以及连续型拉线机构的运动学模型，在此基础上建立了一个通用运动学模型，以及工作空间模型。与传统避障相反，本文提出了一种利用现有障碍或主动布置约束来拓展工作空间的新方法。通过牛顿-欧拉法以及拉格朗日方程建立了蛇形拉线机构的静力学模型以及动力学模型。在非线性欧拉-伯努利梁理论下结合汉密尔顿原理建立了连续型拉线机构的静力学模型以及动力学模型。论文中利用拉线机构设计了一系列新型水下推进器。与传统机器鱼推进器设计方法（单关节，多关节以及基于智能材料的连续型设计）相比，基于拉线机构的水下推进器的优点在于：所需驱动器少，能更好地模拟鱼的游动，易于控制，推进效率高，以及容易衍生新型推进器。设计制作了四条拉线驱动机器鱼，以此为平台验证了拉线推进器的性能以及优点。实验结果表明，基于蛇形拉线机构的推进器可以提供较大推力；基于连续型拉线机构设计的推进器受摩擦影响较小；基于单段式拉线机构的推进器可以模仿鱼类摆动式推进，具有很好的转弯性能；基于多段式拉线机构的推进器可以同时模仿摆动式推进和波动式推进，具有更好的稳定性以及游速。此外，基于拉线机构制造了一种新型矢量推进器。该推进器可以提供任意方向的推力，从而提高机器鱼的机动性能。实验中，在两个额定功率为1瓦的电机驱动下，机器鱼的最大游速为0.67 体长/秒；最小转弯半径为0.24倍体长；转弯速度为51.4 度/秒；最高推进效率为92.85%。最后，采用拉线推进器制作了一个室内空中移动机器人，取名为Flying Octopus。它由一个氦气球提供浮力悬停在空中，通过四个独立控制的拉线扑翼驱动可在三维空间自由运动。Attracted by the outstanding performance of natural creatures, researchers have been mimicking animals and plants to develop their robots. Inspired by animals’ musculoskeletal system, especially the skeletal structure of snakes and octopus arm muscle arrangement, in this thesis, a novel wire-driven mechanism (WDM) is designed. It is composed of a flexible backbone and a number of controlling wire groups. The flexible backbone provides support, while the wire groups transmit motion and force from the actuators, mimicking the muscles. According to its backbone structure, the WDM is categorized as serpentine WDM and continuum WDM. Depending on the backbone segmentation, WDM is divided into single segment WDM and multi-segment WDM. Each segment is controlled by one or two wire groups. Features of WDM include: flexible, highly under-actuated, leverage effect, and long range force and motion transmission. The flexibility enables the WDM making large deformation, while the under-actuation greatly reduces th number of actuators, simplifying the system. With the leverage effect, WDM distal end velocity and acceleration is greatly amplified from that of wire. Also, in the WDM, the actuators and the backbone are serperated. Actuator’s motion is transmitted by the wires. This makes the WDM very compact. With these features, the WDM is not only well suited to confined space, but also flapping propulsion, especially in water.In the thesis, the design, kinematics, workspace, static and dynamic models of the WDM are explored systematically. Under the constant curvature assumption, the kinematic model of serpentine WDM and continuum WDM are established. A generalized model is also developed. Workspace model is built from the forward kinematic model. Rather than avoiding obstacles, a novel idea of employing obstacles or actively deploying constraints to expand workspace is also discussed for WDM-based flexible manipulators. The static model and dynamic model of serpentine WDM is developed using the Newton-Euler method and the Lagrange Equation, while that of continuum WDM is built under the non-linear Euler-Bernoulli Beam theory and the extended Hamilton’s principle.In the thesis, a number of novel WDM based underwater propulsors are developed. Compared with existing fish-like propulsor designs, including single joint design, multi-joint design, and smart material based continuum design, the proposed WDM-based propulsors have advantages in several aspects, such as employing less actuators, better resembling the fish swimming body curve, ease of control, and more importantly, being highly efficient. Also, brand new propulsors can be easily developed using the WDM. To demonstrate the features as well as the advantages of WDM propulsors, four robot fish prototypes are developed. Experiments show that the serpentine WDM-based propulsor could provide large flapping force while the continuum WDM-based propulsor is less affected by joint friction. On the other hand, single segment WDM propulsor can make oscillatory swim while multi- segment WDM propulsor can make both oscillatory and undulatory swims. The undulatory swimming outperforms the oscillatory swimming in stability and speed, but is inferior in turning around. In addition, a novel robot fish with vector propulsion capability is also developed. It can provide thrust in arbitrary directions, hence, improving the maneuverability of the robot fish. In the experiments, with the power limit of two watts, the maximum forward speed of the WDM robot fishes can reach 0.67 BL (Body Length)/s. The minimum turning radius is 0.24 BL, and the turning speed is 51.4°/s. The maximum Froude efficiency of the WDM robot fishes is 92.85%. Finally, the WDM-based propulsor is used to build an indoor Lighter-than-Air- Vehicle (LTAV), named Flying Octopus. It is suspended in the air by a helium balloon and actuated by four independently controlled wire-driven flapping wings. With the wing propulsion, it can move in 3D space effectively.Detailed summary in vernacular field only.Detailed summary in vernacular field only.Detailed summary in vernacular field only.Li, Zheng.Thesis (Ph.D.)--Chinese University of Hong Kong, 2013.Includes bibliographical references (leaves 205-214).Abstracts also in Chinese.Abstracth --- p.i摘要 --- p.iiiAcknowledgement --- p.vList of Figures --- p.xiList of Tables --- p.xviiChapter Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Background --- p.1Chapter 1.2 --- Related Research --- p.2Chapter 1.2.1 --- Flexible Manipulator --- p.2Chapter 1.2.2 --- Robot Fish --- p.10Chapter 1.3 --- Motivation of the Dissertation --- p.13Chapter 1.4 --- Organization of the Dissertation --- p.14Chapter Chapter 2 --- Biomimetic Wire-Driven Mechanism --- p.16Chapter 2.1 --- Inspiration from Nature --- p.16Chapter 2.1.1 --- Snake Skeleton --- p.18Chapter 2.1.2 --- Octopus Arm --- p.19Chapter 2.2 --- Wire-Driven Mechanism Design --- p.20Chapter 2.2.1 --- Flexible Backbone --- p.20Chapter 2.2.2 --- Backbone Segmentation --- p.26Chapter 2.2.3 --- Wire Configuration --- p.28Chapter 2.3 --- Wire-Driven Mechanism Categorization --- p.31Chapter 2.4 --- Summary --- p.32Chapter Chapter 3 --- Kinematics and Workspace of the Wire-Driven Mechanism --- p.33Chapter 3.1 --- Kinematic Model of Single Segment WDM --- p.33Chapter 3.1.1 --- Kinematic Model of the Serpentine WDM --- p.34Chapter 3.1.2 --- Kinematic Model of the Continuum WDM --- p.39Chapter 3.1.3 --- A Generalized Kinematic Model --- p.43Chapter 3.2 --- Kinematic Model of Multi-Segment WDM --- p.47Chapter 3.2.1 --- Forward Kinematics --- p.47Chapter 3.2.2 --- Inverse Kinematics --- p.51Chapter 3.3 --- Workspace --- p.52Chapter 3.3.1 --- Workspace of Single Segment WDM --- p.52Chapter 3.3.2 --- Workspace of Multi-Segment WDM --- p.53Chapter 3.4 --- Employing Obstacles to Expand WDM Workspace --- p.55Chapter 3.4.1 --- Constrained Kinematics Model of WDM --- p.55Chapter 3.4.2 --- WDM Workspace with Constraints --- p.61Chapter 3.5 --- Model Validation via Experiment --- p.64Chapter 3.5.1 --- Single Segment WDM Kinematic Model Validation --- p.64Chapter 3.5.2 --- Multi-Segment WDM Kinematic Model Validation --- p.66Chapter 3.5.3 --- Constrained Kinematic Model Validation --- p.70Chapter 3.6 --- Summary --- p.73Chapter Chapter 4 --- Statics and Dynamics of the Wire-Driven Mechanism --- p.75Chapter 4.1 --- Static Model of the Wire-Driven Mechanism --- p.75Chapter 4.1.1 --- Static Model of SPSP WDM --- p.75Chapter 4.1.2 --- Static Model of SPCP WDM --- p.81Chapter 4.2 --- Dynamic Model of the Wire-Driven Mechanism --- p.88Chapter 4.2.1 --- Dynamic Model of SPSP WDM --- p.88Chapter 4.2.2 --- Dynamic Model of SPCP WDM --- p.92Chapter 4.3 --- Summary --- p.94Chapter Chapter 5 --- Application I - Wire-Driven Robot Fish --- p.95Chapter 5.1 --- Fish Swimming Introduction --- p.95Chapter 5.1.1 --- Fish Swimming Categories --- p.95Chapter 5.1.2 --- Body Curve Function --- p.96Chapter 5.1.3 --- Fish Swimming Hydrodynamics --- p.101Chapter 5.1.4 --- Fish Swimming Data --- p.103Chapter 5.2 --- Oscillatory Wire-Driven Robot Fish --- p.104Chapter 5.2.1 --- Serpentine Oscillatory Wire-Driven Robot Fish Design --- p.105Chapter 5.2.2 --- Continuum Oscillatory Wire-Driven Robot Fish Design --- p.110Chapter 5.2.3 --- Oscillatory Robot Fish Propulsion Model --- p.114Chapter 5.2.4 --- Robot Fish Swimming Control --- p.116Chapter 5.2.5 --- Swimming Experiments --- p.118Chapter 5.3 --- Undulatory Wire-Driven Robot Fish --- p.125Chapter 5.3.1 --- Undulatory Wire-Driven Robot Fish Design --- p.125Chapter 5.3.2 --- Undulatory Wire-Driven Robot Fish Propulsion Model --- p.130Chapter 5.3.3 --- Swimming Experiments --- p.131Chapter 5.4 --- Vector Propelled Wire-Driven Robot Fish --- p.136Chapter 5.4.1 --- Vector Propelled Wire-Driven Robot Fish Design --- p.136Chapter 5.4.2 --- Tail Motion Analysis --- p.140Chapter 5.4.3 --- Swimming Experiments --- p.142Chapter 5.5 --- Wire-Driven Robot Fish Performance and Discussion --- p.144Chapter 5.5.1 --- Performance --- p.144Chapter 5.5.2 --- Discussion --- p.147Chapter 5.6 --- Summary --- p.149Chapter Chapter 6 --- Aplication II - Wire-Driven LTAV - Flying Octopus --- p.151Chapter 6.1 --- Introduction --- p.151Chapter 6.2 --- Flying Octopus Design --- p.152Chapter 6.2.1 --- Flying Octopus Body Design --- p.152Chapter 6.2.2 --- Wire-Driven Flapping Wing Design --- p.153Chapter 6.3 --- Flying Octopus Motion Control --- p.156Chapter 6.3.1 --- Propulsion Model --- p.156Chapter 6.3.2 --- Motion Control Strategy --- p.157Chapter 6.3.3 --- Motion Simulation --- p.159Chapter 6.4 --- Prototype and Indoor Experiments --- p.161Chapter 6.4.1 --- Flying Octopus Prototype --- p.161Chapter 6.4.2 --- Indoor Experiments --- p.163Chapter 6.4.3 --- Discussion --- p.165Chapter 6.5 --- Summary --- p.166Chapter Chapter 7 --- Conclusions and Future Work --- p.167Chapter Appendix A - --- Publication Record --- p.170Chapter Appendix B - --- Derivation --- p.172Chapter Appendix C --- Matlab Programs --- p.176References --- p.20

Design, Analysis, and Fabrication of a Snake-Inspired Robot with a Rectilinear Gait

Snake-inspired robots display promise in areas such as search, rescue and reconnaissance due to their ability to locomote through tight spaces. However, several specific issues regarding the design and analysis must be addressed in order to better design them. This thesis develops kinematic and dynamic models for a class of snake-inspired gait known as a rectilinear gait, where mechanism topology changes over the course of the gait. A model using an Eulerian framework and Coulomb friction yields torque expressions for the joints of the robot. B-spline curves are then used to generate a parametric optimization formulation for joint trajectory generation. Exact gradient computation of the torque functions is presented. A parametric model is used to describe the performance effects of changing system parameters such as mass, length, and motor speed. Finally, a snake-inspired robot is designed and fabricated in order to demonstrate both the vertical rectilinear gait and a modular, molded design aimed at reducing the cost of fabrication

Design, Analysis, and Fabrication of a Snake-Inspired Robot with a Rectilinear Gait

Snake-inspired robots display promise in areas such as search, rescue and reconnaissance due to their ability to locomote through tight spaces. However, several specific issues regarding the design and analysis must be addressed in order to better design them. This thesis develops kinematic and dynamic models for a class of snake-inspired gait known as a rectilinear gait, where mechanism topology changes over the course of the gait. A model using an Eulerian framework and Coulomb friction yields torque expressions for the joints of the robot. B-spline curves are then used to generate a parametric optimization formulation for joint trajectory generation. Exact gradient computation of the torque functions is presented. A parametric model is used to describe the performance effects of changing system parameters such as mass, length, and motor speed. Finally, a snake-inspired robot is designed and fabricated in order to demonstrate both the vertical rectilinear gait and a modular, molded design aimed at reducing the cost of fabrication

Modular soft pneumatic actuator system design for compliance matching

The future of robotics is personal. Never before has technology been as pervasive as it is today, with advanced mobile electronics hardware and multi-level network connectivity pushing âsmartâ devices deeper into our daily lives through home automation systems, virtual assistants, and wearable activity monitoring. As the suite of personal technology around us continues to grow in this way, augmenting and offloading the burden of routine activities of daily living, the notion that this trend will extend to robotics seems inevitable. Transitioning robots from their current principal domain of industrial factory settings to domestic, workplace, or public environments is not simply a matter of relocation or reprogramming, however. The key differences between âtraditionalâ types of robots and those which would best serve personal, proximal, human interactive applications demand a new approach to their design. Chief among these are requirements for safety, adaptability, reliability, reconfigurability, and to a more practical extent, usability. These properties frame the context and objectives of my thesis work, which seeks to provide solutions and answers to not only how these features might be achieved in personal robotic systems, but as well what benefits they can afford. I approach the investigation of these questions from a perspective of compliance matching of hardware systems to their applications, by providing methods to achieve mechanical attributes complimentary to their environment and end-use. These features are fundamental to the burgeoning field of Soft Robotics, wherein flexible, compliant materials are used as the basis for the structure, actuation, sensing, and control of complete robotic systems. Combined with pressurized air as a power source, soft pneumatic actuator (SPA) based systems offers new and novel methods of exploiting the intrinsic compliance of soft material components in robotic systems. While this strategy seems to answer many of the needs for human-safe robotic applications, it also brings new questions and challenges: What are the needs and applications personal robots may best serve? Are soft pneumatic actuators capable of these tasks, or âusefulâ work output and performance? How can SPA based systems be applied to provide complex functionality needed for operation in diverse, real-world environments? What are the theoretical and practical challenges in implementing scalable, multiple degrees of freedom systems, and how can they be overcome? I present solutions to these problems in my thesis work, elucidated through scientific design, testing and evaluation of robotic prototypes which leverage and demonstrate three key features: 1) Intrinsic compliance: provided by passive elastic and flexible component material properties, 2) Extrinsic compliance: rendered through high number of independent, controllable degrees of freedom, and 3) Complementary design: exhibited by modular, plug and play architectures which combine both attributes to achieve compliant systems. Through these core projects and others listed below I have been engaged in soft robotic technology, its application, and solutions to the challenges which are critical to providing a path forward within the soft robotics field, as well as for the future of personal robotics as a whole toward creating a better society

A continuum robotic platform for endoscopic non-contact laser surgery: design, control, and preclinical evaluation

The application of laser technologies in surgical interventions has been accepted in the clinical domain due to their atraumatic properties. In addition to manual application of fibre-guided lasers with tissue contact, non-contact transoral laser microsurgery (TLM) of laryngeal tumours has been prevailed in ENT surgery. However, TLM requires many years of surgical training for tumour resection in order to preserve the function of adjacent organs and thus preserve the patient’s quality of life. The positioning of the microscopic laser applicator outside the patient can also impede a direct line-of-sight to the target area due to anatomical variability and limit the working space. Further clinical challenges include positioning the laser focus on the tissue surface, imaging, planning and performing laser ablation, and motion of the target area during surgery. This dissertation aims to address the limitations of TLM through robotic approaches and intraoperative assistance. Although a trend towards minimally invasive surgery is apparent, no highly integrated platform for endoscopic delivery of focused laser radiation is available to date. Likewise, there are no known devices that incorporate scene information from endoscopic imaging into ablation planning and execution. For focusing of the laser beam close to the target tissue, this work first presents miniaturised focusing optics that can be integrated into endoscopic systems. Experimental trials characterise the optical properties and the ablation performance. A robotic platform is realised for manipulation of the focusing optics. This is based on a variable-length continuum manipulator. The latter enables movements of the endoscopic end effector in five degrees of freedom with a mechatronic actuation unit. The kinematic modelling and control of the robot are integrated into a modular framework that is evaluated experimentally. The manipulation of focused laser radiation also requires precise adjustment of the focal position on the tissue. For this purpose, visual, haptic and visual-haptic assistance functions are presented. These support the operator during teleoperation to set an optimal working distance. Advantages of visual-haptic assistance are demonstrated in a user study. The system performance and usability of the overall robotic system are assessed in an additional user study. Analogous to a clinical scenario, the subjects follow predefined target patterns with a laser spot. The mean positioning accuracy of the spot is 0.5 mm. Finally, methods of image-guided robot control are introduced to automate laser ablation. Experiments confirm a positive effect of proposed automation concepts on non-contact laser surgery.Die Anwendung von Lasertechnologien in chirurgischen Interventionen hat sich aufgrund der atraumatischen Eigenschaften in der Klinik etabliert. Neben manueller Applikation von fasergeführten Lasern mit Gewebekontakt hat sich die kontaktfreie transorale Lasermikrochirurgie (TLM) von Tumoren des Larynx in der HNO-Chirurgie durchgesetzt. Die TLM erfordert zur Tumorresektion jedoch ein langjähriges chirurgisches Training, um die Funktion der angrenzenden Organe zu sichern und damit die Lebensqualität der Patienten zu erhalten. Die Positionierung des mikroskopis chen Laserapplikators außerhalb des Patienten kann zudem die direkte Sicht auf das Zielgebiet durch anatomische Variabilität erschweren und den Arbeitsraum einschränken. Weitere klinische Herausforderungen betreffen die Positionierung des Laserfokus auf der Gewebeoberfläche, die Bildgebung, die Planung und Ausführung der Laserablation sowie intraoperative Bewegungen des Zielgebietes. Die vorliegende Dissertation zielt darauf ab, die Limitierungen der TLM durch robotische Ansätze und intraoperative Assistenz zu adressieren. Obwohl ein Trend zur minimal invasiven Chirurgie besteht, sind bislang keine hochintegrierten Plattformen für die endoskopische Applikation fokussierter Laserstrahlung verfügbar. Ebenfalls sind keine Systeme bekannt, die Szeneninformationen aus der endoskopischen Bildgebung in die Ablationsplanung und -ausführung einbeziehen. Für eine situsnahe Fokussierung des Laserstrahls wird in dieser Arbeit zunächst eine miniaturisierte Fokussieroptik zur Integration in endoskopische Systeme vorgestellt. Experimentelle Versuche charakterisieren die optischen Eigenschaften und das Ablationsverhalten. Zur Manipulation der Fokussieroptik wird eine robotische Plattform realisiert. Diese basiert auf einem längenveränderlichen Kontinuumsmanipulator. Letzterer ermöglicht in Kombination mit einer mechatronischen Aktuierungseinheit Bewegungen des Endoskopkopfes in fünf Freiheitsgraden. Die kinematische Modellierung und Regelung des Systems werden in ein modulares Framework eingebunden und evaluiert. Die Manipulation fokussierter Laserstrahlung erfordert zudem eine präzise Anpassung der Fokuslage auf das Gewebe. Dafür werden visuelle, haptische und visuell haptische Assistenzfunktionen eingeführt. Diese unterstützen den Anwender bei Teleoperation zur Einstellung eines optimalen Arbeitsabstandes. In einer Anwenderstudie werden Vorteile der visuell-haptischen Assistenz nachgewiesen. Die Systemperformanz und Gebrauchstauglichkeit des robotischen Gesamtsystems werden in einer weiteren Anwenderstudie untersucht. Analog zu einem klinischen Einsatz verfolgen die Probanden mit einem Laserspot vorgegebene Sollpfade. Die mittlere Positioniergenauigkeit des Spots beträgt dabei 0,5 mm. Zur Automatisierung der Ablation werden abschließend Methoden der bildgestützten Regelung vorgestellt. Experimente bestätigen einen positiven Effekt der Automationskonzepte für die kontaktfreie Laserchirurgie

Development of a Novel Amphibious Locomotion System for use in Intra-Luminal Surgical Procedures

Colonoscopy is widely considered the gold standard for inspection of the colon. The procedure is however not without issue, current colonoscopes have seen little change or innovation throughout their 40 years of use with patient discomfort still limiting success. The aim of this PhD study was to develop a locomotion system for use on a robotic device that can traverse a liquid filled colon for atraumatic inspection and biopsy tasks. The PhD was undertaken as part of a larger two-centre EU project, which aimed to bring about a change in the way colonoscopy is done by moving to “robotic hydro-colonoscopy”. In this thesis the initial development and testing of an amphibious locomotion concept for use in a procedure known as hydro-colonoscopy is described. The locomotion system is comprised of four Archimedes’ screws arranged in two counter-rotating pairs. These aim to provide propulsion through a fluid-filled colon as well as provide locomotive traction against colonic tissue in partially fluid-filled or collapsed sections of the colon, such as the splenic flexure. Experimental studies were carried out on a single screw system in fluid and dual counter-rotating screws in contact conditions. These show the system’s ability to generate thrust in the two discrete modes of locomotion of the amphibious system. A 2:1 scale prototype of the proposed device was produced and features compliant screw threads to provide atraumatic locomotion. The scale prototype device was tested in ex-vivo porcine colon. The developed system was able to traverse through lumen to limited success, which demonstrated that this concept has the potential for use on an intra-luminal robotic device The key contributions of this research are: variable geometry locomotion system; amphibious locomotion using Archimedes’ screws; experimental assessment of the locomotion in fluid, contact and amphibious states; and analysis of the contact dynamics against tissue

Soft pneumatic actuators: a review of design, fabrication, modeling, sensing, control and applications

Soft robotics is a rapidly evolving field where robots are fabricated using highly deformable materials and usually follow a bioinspired design. Their high dexterity and safety make them ideal for applications such as gripping, locomotion, and biomedical devices, where the environment is highly dynamic and sensitive to physical interaction. Pneumatic actuation remains the dominant technology in soft robotics due to its low cost and mass, fast response time, and easy implementation. Given the significant number of publications in soft robotics over recent years, newcomers and even established researchers may have difficulty assessing the state of the art. To address this issue, this article summarizes the development of soft pneumatic actuators and robots up until the date of publication. The scope of this article includes the design, modeling, fabrication, actuation, characterization, sensing, control, and applications of soft robotic devices. In addition to a historical overview, there is a special emphasis on recent advances such as novel designs, differential simulators, analytical and numerical modeling methods, topology optimization, data-driven modeling and control methods, hardware control boards, and nonlinear estimation and control techniques. Finally, the capabilities and limitations of soft pneumatic actuators and robots are discussed and directions for future research are identified