Improving the predictability of take-off times with Machine Learning : a case study for the Maastricht upper area control centre area of responsibility

The uncertainty of the take-off time is a major contribution to the loss of trajectory predictability. At present, the Estimated Take-Off Time (ETOT) for each individual flight is extracted from the Enhanced Traffic Flow Management System (ETFMS) messages, which are sent each time there is an event triggering a recalculation of the flight data by the Network Man- ager Operations Centre. However, aircraft do not always take- off at the ETOTs reported by the ETFMS due to several factors, including congestion and bad weather conditions at the departure airport, reactionary delays and air traffic flow management slot improvements. This paper presents two machine learning models that take into account several of these factors to improve the take- off time prediction of individual flights one hour before their estimated off-block time. Predictions performed by the model trained on three years of historical flight and weather data show a reduction on the take-off time prediction error of about 30% as compared to the ETOTs reported by the ETFMS.Peer ReviewedPostprint (published version

Architecture and Information Requirements to Assess and Predict Flight Safety Risks During Highly Autonomous Urban Flight Operations

As aviation adopts new and increasingly complex operational paradigms, vehicle types, and technologies to broaden airspace capability and efficiency, maintaining a safe system will require recognition and timely mitigation of new safety issues as they emerge and before significant consequences occur. A shift toward a more predictive risk mitigation capability becomes critical to meet this challenge. In-time safety assurance comprises monitoring, assessment, and mitigation functions that proactively reduce risk in complex operational environments where the interplay of hazards may not be known (and therefore not accounted for) during design. These functions can also help to understand and predict emergent effects caused by the increased use of automation or autonomous functions that may exhibit unexpected non-deterministic behaviors. The envisioned monitoring and assessment functions can look for precursors, anomalies, and trends (PATs) by applying model-based and data-driven methods. Outputs would then drive downstream mitigation(s) if needed to reduce risk. These mitigations may be accomplished using traditional design revision processes or via operational (and sometimes automated) mechanisms. The latter refers to the in-time aspect of the system concept. This report comprises architecture and information requirements and considerations toward enabling such a capability within the domain of low altitude highly autonomous urban flight operations. This domain may span, for example, public-use surveillance missions flown by small unmanned aircraft (e.g., infrastructure inspection, facility management, emergency response, law enforcement, and/or security) to transportation missions flown by larger aircraft that may carry passengers or deliver products. Caveat: Any stated requirements in this report should be considered initial requirements that are intended to drive research and development (R&D). These initial requirements are likely to evolve based on R&D findings, refinement of operational concepts, industry advances, and new industry or regulatory policies or standards related to safety assurance

Human Performance Contributions to Safety in Commercial Aviation

In the commercial aviation domain, large volumes of data are collected and analyzed on the failures and errors that result in infrequent incidents and accidents, but in the absence of data on behaviors that contribute to routine successful outcomes, safety management and system design decisions are based on a small sample of non- representative safety data. Analysis of aviation accident data suggests that human error is implicated in up to 80% of accidents, which has been used to justify future visions for aviation in which the roles of human operators are greatly diminished or eliminated in the interest of creating a safer aviation system. However, failure to fully consider the human contributions to successful system performance in civil aviation represents a significant and largely unrecognized risk when making policy decisions about human roles and responsibilities. Opportunities exist to leverage the vast amount of data that has already been collected, or could be easily obtained, to increase our understanding of human contributions to things going right in commercial aviation. The principal focus of this assessment was to identify current gaps and explore methods for identifying human success data generated by the aviation system, from personnel and within the supporting infrastructure

Predictability improvement of Scheduled Flights Departure Time Variation using Supervised Machine Learning

The departure time uncertainty exacerbates the inaccuracy of arrival time estimation and demand for arrival slots, particularly for movements to capacity constrained airports. The Estimated Take-Off Time (ETOT) or Estimated Departure Time(ETD) for each individual flight is currently derived from Air Traffic Flow Management System (ATFMS), which are solely determined based on individual flight plan Estimated Off Block Time(EOBT) or subsequent delays updated by Airline. Even if normal weather conditions prevail, aircraft departure times will differ from ETOTs determined by the ATFMS due to a number of factors such as congestion, early/delayed inbound flight (linked flights), reactionary delays and air traffic flow management slot changes. This paper presents a model that predicts departure time variance based on the previous leg departure time using a combination of exponential moving average and machine learning methods. The model correctly classifies the departure time (Early, On Time, Delay) based on the previous leg departure state, allowing the ATFM system to measure the arrival time of a capacity constrained airport with greater accuracy and better assess demand requirements. The results show that the proposed model with M5P Regression tree provides the best results, with Mean Absolute Error and Root Mean Square Error (RMSE) of 3.43 and 4.83, respectively, indicating a 50% improvement over previous research findings. Whereas, with logistic regression, the classification of departure time (Early, On Time, Delay) is achieved a better accuracy of 91 %, which is higher than previous works

Predictive Power of Air Travel and Socio-Economic Data for Early Pandemic Spread

Controlling the pandemic spread of newly emerging diseases requires rapid, targeted allocation of limited resources among nations. Critical, early control steps would be greatly enhanced if the key risk factors can be identified that accurately predict early disease spread immediately after emergence.Here, we examine the role of travel, trade, and national healthcare resources in predicting the emergence and initial spread of 2009 A/H1N1 influenza. We find that incorporating national healthcare resource data into our analyses allowed a much greater capacity to predict the international spread of this virus. In countries with lower healthcare resources, the reporting of 2009 A/H1N1 cases was significantly delayed, likely reflecting a lower capacity for testing and reporting, as well as other socio-political issues. We also report substantial international trade in live swine and poultry in the decade preceding the pandemic which may have contributed to the emergence and mixed genotype of this pandemic strain. However, the lack of knowledge of recent evolution of each H1N1 viral gene segment precludes the use of this approach to determine viral origins.We conclude that strategies to prevent pandemic influenza virus emergence and spread in the future should include: 1) enhanced surveillance for strains resulting from reassortment in traded livestock; 2) rapid deployment of control measures in the initial spreading phase to countries where travel data predict the pathogen will reach and to countries where lower healthcare resources will likely cause delays in reporting. Our results highlight the benefits, for all parties, when higher income countries provide additional healthcare resources for lower income countries, particularly those that have high air traffic volumes. In particular, international authorities should prioritize aid to those poorest countries where both the risk of emerging infectious diseases and air traffic volume is highest. This strategy will result in earlier detection of pathogens and a reduction in the impact of future pandemics

Adaptive Mechanisms in an Airline Ticket Demand Forecasting System

Adaptivity is a very important feature for industrial forecast systems. In the airline industry, a reliable forecasting of a demand for tickets at different fare levels forms a crucial step in a global optimization process, the objective of which is to sell a restricted number of available seats in a plane with a maximized revenue. Due to continuously changing demand caused by seasonality, special events like holidays or fairs, changes in the flight schedules or changes of the political or cultural situation of a country, there is a need for robust, adaptive forecasting techniques able to cope with such changes. In this paper an overview of various adaptive mechanisms used in the new forecasting system of the Lufthansa Airline is presented

In-Time UAV Flight-Trajectory Estimation and Tracking Using Bayesian Filters

Rapid increase of UAV operation in the next decade in areas of on-demand delivery, medical transportation services, law enforcement, traffic surveillance and several others pose potential risks to the low altitude airspace above densely populated areas. Safety assessment of airspace demands the need for a novel UAV traffic management (UTM) framework for regulation and tracking of the vehicles. Particularly for low-altitude UAV operations, quality of GPS measurements feeding into the UAV is often compromised by loss of communication link caused by presence of trees or tall buildings in proximity to the UAV flight path. Inaccurate GPS locations may yield to unreliable monitoring and inaccurate prognosis of remaining battery life and other safety metrics which rely on future expected trajectory of the UAV. This work therefore proposes a generalized monitoring and prediction methodology for autonomous UAVs using in-time GPS measurements. Firstly, a typical 4D smooth trajectory generation technique from a series of waypoint locations with associated expected times-of-arrival based on B-spline curves is presented. Initial uncertainty in the vehicle's expected cruise velocity is quantified to compute confidence intervals along the entire flight trajectory using error interval propagation approach. Further, the generated planned trajectory is considered as the prior knowledge which is updated during its flight with incoming GPS measurements in order to estimate its current location and corresponding kinematic profiles. Estimation of position is denoted in dicrete state-space representation such that position at a future time step is derived from position and velocity at current time step and expected velocity at the future time step. A linear Bayesian filtering algorithm is employed to efficiently refine position estimation from noisy GPS measurements and update the confidence intervals. Further, a dynamic re-planning strategy is implemented to incorporate unexpected detour or delay scenarios. Finally, critical challenges related to uncertainty quantification in trajectory prognosis for autonomous vehicles are identified, and potential solutions are discussed at the end of the paper. The entire monitoring framework is demonstrated on real UAV flight experiments conducted at the NASA Langley Research Center