1,037 research outputs found
High-performance flexible energy storage and harvesting system for wearable electronics.
This paper reports on the design and operation of a flexible power source integrating a lithium ion battery and amorphous silicon solar module, optimized to supply power to a wearable health monitoring device. The battery consists of printed anode and cathode layers based on graphite and lithium cobalt oxide, respectively, on thin flexible current collectors. It displays energy density of 6.98âmWh/cm(2) and demonstrates capacity retention of 90% at 3C discharge rate and ~99% under 100 charge/discharge cycles and 600 cycles of mechanical flexing. A solar module with appropriate voltage and dimensions is used to charge the battery under both full sun and indoor illumination conditions, and the addition of the solar module is shown to extend the battery lifetime between charging cycles while powering a load. Furthermore, we show that by selecting the appropriate load duty cycle, the average load current can be matched to the solar module current and the battery can be maintained at a constant state of charge. Finally, the battery is used to power a pulse oximeter, demonstrating its effectiveness as a power source for wearable medical devices
Wearable flexible lightweight modular RFID tag with integrated energy harvester
A novel wearable radio frequency identification (RFID) tag with sensing, processing, and decision-taking capability is presented for operation in the 2.45-GHz RFID superhigh frequency (SHF) band. The tag is powered by an integrated light harvester, with a flexible battery serving as an energy buffer. The proposed active tag features excellent wearability, very high read range, enhanced functionality, flexible interfacing with diverse low-power sensors, and extended system autonomy through an innovative holistic microwave system design paradigm that takes antenna design into consideration from the very early stages. Specifically, a dedicated textile shorted circular patch antenna with monopolar radiation pattern is designed and optimized for highly efficient and stable operation within the frequency band of operation. In this process, the textile antenna's functionality is augmented by reusing its surface as an integration platform for light-energy-harvesting, sensing, processing, and transceiver hardware, without sacrificing antenna performance or the wearer's comfort. The RFID tag is validated by measuring its stand-alone and on-body characteristics in free-space conditions. Moreover, measurements in a real-world scenario demonstrate an indoor read range up to 23 m in nonline-of-sight indoor propagation conditions, enabling interrogation by a reader situated in another room. In addition, the RFID platform only consumes 168.3 mu W, when sensing and processing are performed every 60 s
Substrate integrated waveguide textile antennas as energy harvesting platforms
Textile multi-antenna systems are key components of smart fabric and interactive textile (SFIT) systems, as they establish reliable and energy-efficient wireless body-centric communication links. In this work, we investigate how their functionality can further be extended by exploiting their surface as an energy harvesting and power management platform. We provide guidelines for selecting an appropriate antenna topology and describe a suitable integration procedure. We demonstrate this approach by integrating two flexible solar cells, a micro-energy cell and a flexible power management system onto a well-chosen wearable substrate integrated waveguide cavity-backed textile slot antenna, without affecting its performance, to enable energy harvesting from solar and artificial light. In addition, the compact and highly-integrated harvesting module provides a terminal for connecting a thermoelectric generator, enabling thermal body energy harvesting. Measurements in a realistic indoor environment have demonstrated that this hybrid energy harvesting approach leverages a more continuous flow of scavenged energy, enabling energy scavenging in most of the indoor and outdoor scenarios
Recommended from our members
Printable magnesium ion quasi-solid-state asymmetric supercapacitors for flexible solar-charging integrated units.
Wearable and portable self-powered units have stimulated considerable attention in both the scientific and technological realms. However, their innovative development is still limited by inefficient bulky connections between functional modules, incompatible energy storage systems with poor cycling stability, and real safety concerns. Herein, we demonstrate a flexible solar-charging integrated unit based on the design of printed magnesium ion aqueous asymmetric supercapacitors. This power unit exhibits excellent mechanical robustness, high photo-charging cycling stability (98.7% capacitance retention after 100 cycles), excellent overall energy conversion and storage efficiency (ηoverallâ=â17.57%), and outstanding input current tolerance. In addition, the Mg ion quasi-solid-state asymmetric supercapacitors show high energy density up to 13.1 mWh cm-3 via pseudocapacitive ion storage as investigated by an operando X-ray diffraction technique. The findings pave a practical route toward the design of future self-powered systems affording favorable safety, long life, and high energy
A review of solar energy harvesting electronic textiles
An increased use in wearable, mobile, and electronic textile sensing devices has led to a desire to keep these devices continuously powered without the need for frequent recharging or bulky energy storage. To achieve this, many have proposed integrating energy harvesting capabilities into clothing: solar energy harvesting has been one of the most investigated avenues for this due to the abundance of solar energy and maturity of photovoltaic technologies. This review provides a comprehensive, contemporary, and accessible overview of electronic textiles that are capable of harvesting solar energy. The review focusses on the suitability of the textile-based energy harvesting devices for wearable applications. While multiple methods have been employed to integrate solar energy harvesting with textiles, there are only a few examples that have led to devices with textile properties
Energy harvesting towards self-powered iot devices
The internet of things (IoT) manages a large infrastructure of web-enabled smart devices, small devices that use embedded systems, such as processors, sensors, and communication hardware to collect, send, and elaborate on data acquired from their environment. Thus, from a practical point of view, such devices are composed of power-efficient storage, scalable, and lightweight nodes needing power and batteries to operate. From the above reason, it appears clear that energy harvesting plays an important role in increasing the efficiency and lifetime of IoT devices. Moreover, from acquiring energy by the surrounding operational environment, energy harvesting is important to make the IoT device network more sustainable from the environmental point of view. Different state-of-the-art energy harvesters based on mechanical, aeroelastic, wind, solar, radiofrequency, and pyroelectric mechanisms are discussed in this review article. To reduce the power consumption of the batteries, a vital role is played by power management integrated circuits (PMICs), which help to enhance the system's life span. Moreover, PMICs from different manufacturers that provide power management to IoT devices have been discussed in this paper. Furthermore, the energy harvesting networks can expose themselves to prominent security issues putting the secrecy of the system to risk. These possible attacks are also discussed in this review article
Comparing current consistency and electrical resistance of wearable photovoltaic cells pre- and post-laundering and pre- and post-corrosion resistance testing conditions.
Photovoltaic(PV) technology is promising due to its natural availability among energy harvesting technologies. There is a growing need for sustainable power sources that can function without being connected to a power source or needing regular battery replacements. Wearable PV cells are gaining popularity in different applications. However, most companies produce wearable PVs for terrestrial applications. Research on wearable PV applications for the marine environment remains limited because these cells suffer from several issues. This research compares commercially sourced wearable PV cells\u27 maximum current consistency and electrical resistance for two testing conditions. The researcher followed standardized methods for these two laundering and corrosion testing conditions. The results revealed that current consistency values decreased over both types\u27 laundering and corrosion testing conditions. However, electrical resistance values showed opposite trends. The findings of this study suggest that wearable PV cells may serve as a reliable source for powering electronic devices in marine environments
Recommended from our members
An investigation of a washâdurable solar energy harvesting textile
This work demonstrates a novel and sustainable energy solution in the form of a photovoltaic fabric that can deliver a reliable energy source for wearable and mobile devices. The solar fabric was woven using electronic yarns created by embedding miniature crystalline silicon solar cells connected with fine copper wires within the fibres of a textile yarn. This approach of integrating solar energy harvesting capability within the heart of the textile fabric allows it to retain the flexibility, threeâdimensional deformability, and moisture and heat transfer characteristics of the fabric. In this investigation, both the design and performance of the solar cell embedded yarns and solar energy harvesting fabrics were explored. These yarns and resultant fabrics were characterised under different light intensities and at different angles of incident light, a critical factor for a wearable device. The solar cell embedded yarns woven into fabrics can undergo domestic laundering and maintained ~90% of their original power output after 15 machine wash cycles. The solar fabric embedded with 200 solar cells demonstrated here (44.5 mm Ă 45.5 mm active area) was capable of continuously generating ~2.15 mW/cm2 under one sun illumination and was capable of powering a basic mobile phone. The power generation capability and durability of the solar energy harvesting fabric proved its viability to power wearable devices as an integral part of regular clothing
RF Energy Harvesting Techniques for Battery-less Wireless Sensing, Industry 4.0 and Internet of Things: A Review
As the Internet of Things (IoT) continues to expand, the demand for the use of energy-efficient circuits and battery-less devices has grown rapidly. Battery-less operation, zero maintenance and sustainability are the desired features of IoT devices in fifth generation (5G) networks and green Industry 4.0 wireless systems. The integration of energy harvesting systems, IoT devices and 5G networks has the potential impact to digitalize and revolutionize various industries such as Industry 4.0, agriculture, food, and healthcare, by enabling real-time data collection and analysis, mitigating maintenance costs, and improving efficiency. Energy harvesting plays a crucial role in envisioning a low-carbon Net Zero future and holds significant political importance. This survey aims at providing a comprehensive review on various energy harvesting techniques including radio frequency (RF), multi-source hybrid and energy harvesting using additive manufacturing technologies. However, special emphasis is given to RF-based energy harvesting methodologies tailored for battery-free wireless sensing, and powering autonomous low-power electronic circuits and IoT devices. The key design challenges and applications of energy harvesting techniques, as well as the future perspective of System on Chip (SoC) implementation, data digitization in Industry 4.0, next-generation IoT devices, and 5G communications are discussed
- âŠ