Exploration of the power-performance tradeoff through parameterization of FPGA-based multiprocessor systems

The design space of FPGA-based processor systems is huge, because many parameters can be modified at design- and runtime to achieve an efficient system solution in terms of performance, power and energy consumption. Such parameters are, for example, the number of processors and their configurations, the clock frequencies at design time, the use of dynamic frequency scaling at runtime, the application task distribution, and the FPGA type and size. The major contribution of this paper is the exploration of all these parameters and their impact on performance, power dissipation, and energy consumption for four different application scenarios. The goal is to introduce a first approach for a developer's guideline, supporting the choice of an optimized and specific system parameterization for a target application on FPGA-based multiprocessor systems-on-chip. The FPGAs used for these explorations were Xilinx Virtex-4 and Xilinx Virtex-5. The performance results were measured on the FPGA while the power consumption was estimated using the Xilinx X Power Analyzer tool. Finally, a novel runtime adaptive multiprocessor architecture for dynamic clock frequency scaling is introduced and used for the performance, power and energy consumption evaluations

Exploration of Power-Performance Tradeoffs through Parameterization of FPGA-based Multiprocessor Systems

The design space of FPGA-based processor systems is huge, because many parameters can be modified at design- and runtime to achieve an efficient system solution in terms of performance, power and energy consumption. Such parameters are, for example, the number of processors and their configurations, the clock frequencies at design time, the use of dynamic frequency scaling at runtime, the application task distribution, and the FPGA type and size. The major contribution of this paper is the exploration of all these parameters and their impact on performance, power dissipation, and energy consumption for four different application scenarios. The goal is to introduce a first approach for a developer’s guideline, supporting the choice of an optimized and specific system parameterization for a target application on FPGA-based multiprocessor systems-on-chip. The FPGAs used for these explorations were Xilinx Virtex-4 and Xilinx Virtex-5. The performance results were measured on the FPGA while the power consumption was estimated using the Xilinx XPower Analyzer tool. Finally, a novel runtime adaptive multiprocessor architecture for dynamic clock frequency scaling is introduced and used for the performance, power and energy consumption evaluations

Design Methodologies and CAD Tools for Leakage Power Optimization in FPGAs

The scaling of the CMOS technology has precipitated an exponential increase in both subthreshold and gate leakage currents in modern VLSI designs. Consequently, the contribution of leakage power to the total chip power dissipation for CMOS designs is increasing rapidly, which is estimated to be 40% for the current technology generations and is expected to exceed 50% by the 65nm CMOS technology. In FPGAs, the power dissipation problem is further aggravated when compared to ASIC designs because FPGA use more transistors per logic function when compared to ASIC designs. Consequently, solving the leakage power problem is pivotal to devising power-aware FPGAs in the nanometer regime. This thesis focuses on devising both architectural and CAD techniques for leakage mitigation in FPGAs. Several CAD and architectural modifications are proposed to reduce the impact of leakage power dissipation on modern FPGAs. Firstly, multi-threshold CMOS (MTCMOS) techniques are introduced to FPGAs to permanently turn OFF the unused resources of the FPGA, FPGAs are characterized with low utilization percentages that can reach 60%. Moreover, such architecture enables the dynamic shutting down of the FPGA idle parts, thus reducing the standby leakage significantly. Employing the MTCMOS technique in FPGAs requires several changes to the FPGA architecture, including the placement and routing of the sleep signals and the MTCMOS granularity. On the CAD level, the packing and placement stages are modified to allow the possibility of dynamically turning OFF the idle parts of the FPGA. A new activity generation algorithm is proposed and implemented that aims to identify the logic blocks in a design that exhibit similar idleness periods. Several criteria for the activity generation algorithm are used, including connectivity and logic function. Several versions of the activity generation algorithm are implemented to trade power savings with runtime. A newly developed packing algorithm uses the resulting activities to minimize leakage power dissipation by packing the logic blocks with similar or close activities together. By proposing an FPGA architecture that supports MTCMOS and developing a CAD tool that supports the new architecture, an average power savings of 30% is achieved for a 90nm CMOS process while incurring a speed penalty of less than 5%. This technique is further extended to provide a timing-sensitive version of the CAD flow to vary the speed penalty according to the criticality of each logic block. Secondly, a new technique for leakage power reduction in FPGAs based on the use of input dependency is developed. Both subthreshold and gate leakage power are heavily dependent on the input state. In FPGAs, the effect of input dependency is exacerbated due to the use of pass-transistor multiplexer logic, which can exhibit up to 50% variation in leakage power due to the input states. In this thesis, a new algorithm is proposed that uses bit permutation to reduce subthreshold and gate leakage power dissipation in FPGAs. The bit permutation algorithm provides an average leakage power reduction of 40% while having less than 2% impact on the performance and no penalty on the design area. Thirdly, an accurate probabilistic power model for FPGAs is developed to quantify the savings from the proposed leakage power reduction techniques. The proposed power model accounts for dynamic, short circuit, and leakage power (including both subthreshold and gate leakage power) dissipation in FPGAs. Moreover, the power model accounts for power due to glitches, which accounts for almost 20% of the dynamic power dissipation in FPGAs. The use of probabilities in the power model makes it more computationally efficient than the other FPGA power models in the literature that rely on long input sequence simulations. One of the main advantages of the proposed power model is the incorporation of spatial correlation while estimating the signal probability. Other probabilistic FPGA power models assume spatial independence among the design signals, thus overestimating the power calculations. In the proposed model, a probabilistic model is proposed for spatial correlations among the design signals. Moreover, a different variation is proposed that manages to capture most of the spatial correlations with minimum impact on runtime. Furthermore, the proposed power model accounts for the input dependency of subthreshold and gate leakage power dissipation. By comparing the proposed power model to HSpice simulation, the estimated power is within 8% and is closer to HSpice simulations than other probabilistic FPGA power models by an average of 20%

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Power Estimation Approach for SRAM-based FPGAs

This paper presents the power consumption estimation for the novel Virtex architecture. Due to the fact that the XC4000 and the Virtex core architecture are very similar, we used the basic approaches for the XC4000-FPGAs power consumption estimation and extended that method for the new Virtex family. We determined an appropriate technology-dependent power factor K p to calculate the power consumption on Virtex-chips, and developed a special benchmark test design to conduct our investigations. Additionally, the derived formulas are evaluated on two typical industrial designs. Our own emulation environments called SPYDER-ASIC-X1 and SPYDER-VIRTEX 1-X2 were used, which are best suited for the emulation of hardwar