Support polygon in the hybrid legged-wheeled CENTAURO robot: modelling and control

Search for the robot capable to perform well in the real-world has sparked an interest in the hybrid locomotion systems. The hybrid legged-wheeled robots combine the advantages of the standard legged and wheeled platforms by switching between the quick and efficient wheeled motion on the flat grounds and the more versatile legged mobility on the unstructured terrains. With the locomotion flexibility offered by the hybrid mobility and appropriate control tools, these systems have high potential to excel in practical applications adapting effectively to real-world during locomanipuation operations. In contrary to their standard well-studied counterparts, kinematics of this newer type of robotic platforms has not been fully understood yet. This gap may lead to unexpected results when the standard locomotion methods are applied to hybrid legged-wheeled robots. To better understand mobility of the hybrid legged-wheeled robots, the model that describes the support polygon of a general hybrid legged-wheeled robot as a function of the wheel angular velocities without assumptions on the robot kinematics or wheel camber angle is proposed and analysed in this thesis. Based on the analysis of the developed support polygon model, a robust omnidirectional driving scheme has been designed. A continuous wheel motion is resolved through the Inverse Kinematics (IK) scheme, which generates robot motion compliant with the Non-Sliding Pure-Rolling (NSPR) condition. A higher-level scheme resolving a steering motion to comply with the non-holonomic constraint and to tackle the structural singularity is proposed. To improve the robot performance in presence to the unpredicted circumstances, the IK scheme has been enhanced with the introduction of a new reactive support polygon adaptation task. To this end, a novel quadratic programming task has been designed to push the system Support Polygon Vertices (SPVs) away from the robot Centre of Mass (CoM), while respecting the leg workspace limits. The proposed task has been expressed through the developed SPV model to account for the hardware limits. The omnidirectional driving and reactive control schemes have been verified in the simulation and hardware experiments. To that end, the simulator for the CENTAURO robot that models the actuation dynamics and the software framework for the locomotion research have been developed

Integrating Vehicle Slip and Yaw in Overarching Multi-Tiered Automated Vehicle Steering Control to Balance Path Following Accuracy, Gracefulness, and Safety

Balancing path following accuracy and error convergence with graceful motion in steering control is challenging due to the competing nature of these requirements, especially across a range of operating speeds and conditions. This paper demonstrates that an integrated multi-tiered steering controller considering the impact of slip on kinematic control, dynamic control, and steering actuator rate commands achieves accurate and graceful path following. This work is founded on multi-tiered sideslip and yaw-based models, which allow derivation of controllers considering error due to sideslip and the mapping between steering commands and graceful lateral motion. Observer based sideslip estimates are combined with heading error in the kinematic controller to provide feedforward slip compensation. Path following error is compensated by a continuous Variable Structure Controller (VSC) using speed-based path manifolds to balance graceful motion and error convergence. Resulting yaw rate commands are used by a backstepping dynamic controller to generate steering rate commands. A High Gain Observer (HGO) estimates sideslip and yaw rate for output feedback control. Stability analysis of the output feedback controller is provided, and peaking is resolved. The work focuses on lateral control alone so that the steering controller can be combined with other speed controllers. Field results provide comparisons to related approaches demonstrating gracefulness and accuracy in different complex scenarios with varied weather conditions and perturbations

Design of a cognitive neural predictive controller for mobile robot

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityIn this thesis, a cognitive neural predictive controller system has been designed to guide a nonholonomic wheeled mobile robot during continuous and non-continuous trajectory tracking and to navigate through static obstacles with collision-free and minimum tracking error. The structure of the controller consists of two layers; the first layer is a neural network system that controls the mobile robot actuators in order to track a desired path. The second layer of the controller is cognitive layer that collects information from the environment and plans the optimal path. In addition to this, it detects if there is any obstacle in the path so it can be avoided by re-planning the trajectory using particle swarm optimisation (PSO) technique. Two neural networks models are used: the first model is modified Elman recurrent neural network model that describes the kinematic and dynamic model of the mobile robot and it is trained off-line and on-line stages to guarantee that the outputs of the model will accurately represent the actual outputs of the mobile robot system. The trained neural model acts as the position and orientation identifier. The second model is feedforward multi-layer perceptron neural network that describes a feedforward neural controller and it is trained off-line and its weights are adapted on-line to find the reference torques, which controls the steady-state outputs of the mobile robot system. The feedback neural controller is based on the posture neural identifier and quadratic performance index predictive optimisation algorithm for N step-ahead prediction in order to find the optimal torque action in the transient to stabilise the tracking error of the mobile robot system when the trajectory of the robot is drifted from the desired path during transient state. Three controller methodologies were developed: the first is the feedback neural controller; the second is the nonlinear PID neural feedback controller and the third is nonlinear inverse dynamic neural feedback controller, based on the back-stepping method and Lyapunov criterion. The main advantages of the presented approaches are to plan an optimal path for itself avoiding obstructions by using intelligent (PSO) technique as well as the analytically derived control law, which has significantly high computational accuracy with predictive optimisation technique to obtain the optimal torques control action and lead to minimum tracking error of the mobile robot for different types of trajectories. The proposed control algorithm has been applied to monitor a nonholonomic wheeled mobile robot, has demonstrated the capability of tracking different trajectories with continuous gradients (lemniscates and circular) or non-continuous gradients (square) with bounded external disturbances and static obstacles. Simulations results and experimental work showed the effectiveness of the proposed cognitive neural predictive control algorithm; this is demonstrated by the minimised tracking error to less than (1 cm) and obtained smoothness of the torque control signal less than maximum torque (0.236 N.m), especially when external disturbances are applied and navigating through static obstacles. Results show that the five steps-ahead prediction algorithm has better performance compared to one step-ahead for all the control methodologies because of a more complex control structure and taking into account future values of the desired one, not only the current value, as with one step-ahead method. The mean-square error method is used for each component of the state error vector to compare between each of the performance control methodologies in order to give better control results

Advances in Intelligent Vehicle Control

This book is a printed edition of the Special Issue Advances in Intelligent Vehicle Control that was published in the journal Sensors. It presents a collection of eleven papers that covers a range of topics, such as the development of intelligent control algorithms for active safety systems, smart sensors, and intelligent and efficient driving. The contributions presented in these papers can serve as useful tools for researchers who are interested in new vehicle technology and in the improvement of vehicle control systems

Advances in Mechanical Systems Dynamics 2020

The fundamentals of mechanical system dynamics were established before the beginning of the industrial era. The 18th century was a very important time for science and was characterized by the development of classical mechanics. This development progressed in the 19th century, and new, important applications related to industrialization were found and studied. The development of computers in the 20th century revolutionized mechanical system dynamics owing to the development of numerical simulation. We are now in the presence of the fourth industrial revolution. Mechanical systems are increasingly integrated with electrical, fluidic, and electronic systems, and the industrial environment has become characterized by the cyber-physical systems of industry 4.0. Within this framework, the status-of-the-art has become represented by integrated mechanical systems and supported by accurate dynamic models able to predict their dynamic behavior. Therefore, mechanical systems dynamics will play a central role in forthcoming years. This Special Issue aims to disseminate the latest research findings and ideas in the field of mechanical systems dynamics, with particular emphasis on novel trends and applications

Sliding mode control applied in trajectory-tracking of WMRs and autonomous vehicles

Tese de doutoramento apresentada à Fac. de Ciências e Tecnologia da Universidade de CoimbraThe thesis is structured as follows: • Chapter 2: Trajectory tracking problems are summarized. • Chapter 3: Kinematic and dynamic modeling of theWMRs and car-like robots are presented. • Chapter 4: The concept of sliding mode are first introduced. Then the fundamentals of SMC are summarized, including basic definitions, methods of sliding surface and control law design, robustness properties and the methods on handling chattering problems. New sliding-mode trajectory-tracking and slidingmode path-following controllers for WMRs and car-like vehicles, are also proposed in this chapter. • Chapter 5: The trajectory/path planning are developed, including the velocity profile. • Chapter 6: A model with two freedom degrees is considered for the HNC model. The user comfort is examined not only in the time domain, but also in the frequency domain. • Chapter 7: Experimental results obtained with the implementation of the proposed controllers in RobChair are summarized and discussed. • Chapter 8: Finally, conclusions are drawn and some suggestions for future work are provided

Virtual Structure Based Formation Tracking of Multiple Wheeled Mobile Robots: An Optimization Perspective

Today, with the increasing development of science and technology, many systems need to be optimized to find the optimal solution of the system. this kind of problem is also called optimization problem. Especially in the formation problem of multi-wheeled mobile robots, the optimization algorithm can help us to find the optimal solution of the formation problem. In this paper, the formation problem of multi-wheeled mobile robots is studied from the point of view of optimization. In order to reduce the complexity of the formation problem, we first put the robots with the same requirements into a group. Then, by using the virtual structure method, the formation problem is reduced to a virtual WMR trajectory tracking problem with placeholders, which describes the expected position of each WMR formation. By using placeholders, you can get the desired track for each WMR. In addition, in order to avoid the collision between multiple WMR in the group, we add an attraction to the trajectory tracking method. Because MWMR in the same team have different attractions, collisions can be easily avoided. Through simulation analysis, it is proved that the optimization model is reasonable and correct. In the last part, the limitations of this model and corresponding suggestions are given

Impact of Ear Occlusion on In-Ear Sounds Generated by Intra-oral Behaviors

We conducted a case study with one volunteer and a recording setup to detect sounds induced by the actions: jaw clenching, tooth grinding, reading, eating, and drinking. The setup consisted of two in-ear microphones, where the left ear was semi-occluded with a commercially available earpiece and the right ear was occluded with a mouldable silicon ear piece. Investigations in the time and frequency domains demonstrated that for behaviors such as eating, tooth grinding, and reading, sounds could be recorded with both sensors. For jaw clenching, however, occluding the ear with a mouldable piece was necessary to enable its detection. This can be attributed to the fact that the mouldable ear piece sealed the ear canal and isolated it from the environment, resulting in a detectable change in pressure. In conclusion, our work suggests that detecting behaviors such as eating, grinding, reading with a semi-occluded ear is possible, whereas, behaviors such as clenching require the complete occlusion of the ear if the activity should be easily detectable. Nevertheless, the latter approach may limit real-world applicability because it hinders the hearing capabilities.</p