Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

How to Choose the Relevant MAC Protocol for Wireless Smart Parking Urban Networks?

Parking sensor network is rapidly deploying around the world and is regarded as one of the first implemented urban services in smart cities. To provide the best network performance, the MAC protocol shall be adaptive enough in order to satisfy the traffic intensity and variation of parking sensors. In this paper, we study the heavy-tailed parking and vacant time models from SmartSantander, and then we apply the traffic model in the simulation with four different kinds of MAC protocols, that is, contention-based, schedule-based and two hybrid versions of them. The result shows that the packet interarrival time is no longer heavy-tailed while collecting a group of parking sensors, and then choosing an appropriate MAC protocol highly depends on the network configuration. Also, the information delay is bounded by traffic and MAC parameters which are important criteria while the timely message is required.Comment: The 11th ACM International Symposium on Performance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks (2014

State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

Performance Comparison of Contention- and Schedule-based MAC Protocols in Urban Parking Sensor Networks

Network traffic model is a critical problem for urban applications, mainly because of its diversity and node density. As wireless sensor network is highly concerned with the development of smart cities, careful consideration to traffic model helps choose appropriate protocols and adapt network parameters to reach best performances on energy-latency tradeoffs. In this paper, we compare the performance of two off-the-shelf medium access control protocols on two different kinds of traffic models, and then evaluate their application-end information delay and energy consumption while varying traffic parameters and network density. From the simulation results, we highlight some limits induced by network density and occurrence frequency of event-driven applications. When it comes to realtime urban services, a protocol selection shall be taken into account - even dynamically - with a special attention to energy-delay tradeoff. To this end, we provide several insights on parking sensor networks.Comment: ACM International Workshop on Wireless and Mobile Technologies for Smart Cities (WiMobCity) (2014

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Intelligent TDMA heuristic scheduling by taking into account physical layer interference for an industrial IoT environment

In an Internet of Things environment, where multiple mobile devices are brought together, it is not always possible to serve all these devices simultaneously. We developed an intelligent Time Division Multiple Access (TDMA) scheduler which allows to plan the individual packets of the different streams in such a way that everyone can be served by taking into account the interference on the physical layer. The scheduler is applied in a realistic industrial environment and evaluated based on the maximum link latency, the channel occupancy, and the jitter. Two strategies are compared: one where the packets are sequentially allocated, and one periodically. Our results show that the periodically allocated strategy performs the best for the maximum link latency (for a packet size below 1200 bytes) and for the jitter. The channel occupancy is similar for both strategies. Furthermore, the performance can be improved by using a higher number of channels. Compared to classic Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), the channel occupancy and the jitter are reduced up to 69.9 and 99.9%, respectively. Considering the maximum link latency, the proposed TDMA strategies perform significantly better than the worst case CSMA/CA (up to 99.8%), however, when assuming a best case CSMA/CA scenario, CSMA/CA performs better. Furthermore, we clearly show that there are cases where it is not possible to plan all streams when using CSMA/CA while this becomes feasible when applying the proposed TDMA strategies