1,501 research outputs found
MIMO UWB Systems based on Linear Precoded OFDM for Home Gigabit Applications
International audienceIn this paper, we investigate the use of multiple-input multiple-output (MIMO) techniques with linear precoded orthogonal frequency division multiplexing (LP-OFDM) waveform for high data rate ultra-wideband (UWB) systems. This scheme is an evolution of the multiband OFDM (MB-OFDM) solution supported by the WiMedia Alliance. The aim of this paper is to obtain a very high data rate of around one gigabit for home access networks (HAN) and to improve the system range for lower data rates, while not significantly increasing the system complexity compared to the WiMedia solution. Firstly, a single-input single-output (SISO) LP-OFDM system study is led to high-light the benefits of adding a precoding function to an OFDM signal in the UWB context. In an analytical study, different sys-tem choices and parameterization strategies are proposed in or-der to minimize the mean bit-error-rate (BER) and consequently improve the system range. Secondly, a MIMO scheme is added and global system simulations are performed on a proposed new geometric statistic MIMO channel model. We show that the pro-posed system can considerably improve the system range at low data rates, and can reach very high data rates up to 1 Gbit/s with comparable BER performances to WiMedia
On Optimal Turbo Decoding of Wideband MIMO-OFDM Systems Under Imperfect Channel State Information
We consider the decoding of bit interleaved coded modulation (BICM) applied
to both multiband and MIMO OFDM systems for typical scenarios where only a
noisy (possibly very bad) estimate of the channel is provided by sending a
limited number of pilot symbols. First, by using a Bayesian framework involving
the channel a posteriori density, we adopt a practical decoding metric that is
robust to the presence of channel estimation errors. Then this metric is used
in the demapping part of BICM multiband and MIMO OFDM receivers. We also
compare our results with the performance of a mismatched decoder that replaces
the channel by its estimate in the decoding metric. Numerical results over both
realistic UWB and theoretical Rayleigh fading channels show that the proposed
method provides significant gain in terms of bit error rate compared to the
classical mismatched detector, without introducing any additional complexity
Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications
PhDThe next generation of wireless communication is evolving towards user-centric networks,
where constant and reliable connectivity and services are essential. Bodycentric
wireless network (BCWN) is the most exciting and emerging 4G technology
for short (1-5 m) and very short (below 1 m) range communication systems. It has
got numerous applications including healthcare, entertainment, surveillance, emergency,
sports and military. The major difference between the BCWN and conventional
wireless systems is the radio channel over which the communication takes place. The
human body is a hostile medium from the radio propagation perspective and it is
therefore important to understand and characterise the effect of the human body on
the antenna elements, the radio propagation channel parameters and hence the system
performance. In addition, fading is another concern that affects the reliability and
quality of the wireless link, which needs to be taken into account for a low cost and
reliable wireless communication system for body-centric networks.
The complex nature of the BCWN requires operating wireless devices to provide
low power requirements, less complexity, low cost and compactness in size. Apart
from these characteristics, scalable data rates and robust performance in most fading
conditions and jamming environment, even at low signal to noise ratio (SNR) is
needed. Ultra-wideband (UWB) technology is one of the most promising candidate for
BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation
of ultra wideband body-centric radio propagation channel using single
and multiple antenna techniques. Apart from channel characterisation, system level
modelling of potential UWB radio transceivers for body-centric wireless network is
also proposed. Channel models with respect to large scale and delay analysis are derived
from measured parameters. Results and analyses highlight the consequences
of static and dynamic environments in addition to the antenna positions on the performance
of body-centric wireless communication channels. Extensive measurement
i
campaigns are performed to analyse the significance of antenna diversity to combat
the channel fading in body-centric wireless networks. Various diversity combining
techniques are considered in this process. Measurement data are also used to predict
the performance of potential UWB systems in the body-centric wireless networks.
The study supports the significance of single and multiple antenna channel characterisation
and modelling in producing suitable wireless systems for ultra low power
body-centric wireless networks.University of Engineering and Technology Lahore Pakista
Radio-Communications Architectures
Wireless communications, i.e. radio-communications, are widely used for our different daily needs. Examples are numerous and standard names like BLUETOOTH, WiFI, WiMAX, UMTS, GSM and, more recently, LTE are well-known [Baudoin et al. 2007]. General applications in the RFID or UWB contexts are the subject of many papers. This chapter presents radio-frequency (RF) communication systems architecture for mobile, wireless local area networks (WLAN) and connectivity terminals. An important aspect of today's applications is the data rate increase, especially in connectivity standards like WiFI and WiMAX, because the user demands high Quality of Service (QoS). To increase the data rate we tend to use wideband or multi-standard architecture. The concept of software radio includes a self-reconfigurable radio link and is described here on its RF aspects. The term multi-radio is preferred. This chapter focuses on the transmitter, yet some considerations about the receiver are given. An important aspect of the architecture is that a transceiver is built with respect to the radio-communications signals. We classify them in section 2 by differentiating Continuous Wave (CW) and Impulse Radio (IR) systems. Section 3 is the technical background one has to consider for actual applications. Section 4 summarizes state-of-the-art high data rate architectures and the latest research in multi-radio systems. In section 5, IR architectures for Ultra Wide Band (UWB) systems complete this overview; we will also underline the coexistence and compatibility challenges between CW and IR systems
- …