University of Maryland walking robot: A design project for undergraduate students

The design and construction required that the walking robot machine be capable of completing a number of tasks including walking in a straight line, turning to change direction, and maneuvering over an obstable such as a set of stairs. The machine consists of two sets of four telescoping legs that alternately support the entire structure. A gear-box and crank-arm assembly is connected to the leg sets to provide the power required for the translational motion of the machine. By retracting all eight legs, the robot comes to rest on a central Bigfoot support. Turning is accomplished by rotating the machine about this support. The machine can be controlled by using either a user operated remote tether or the on-board computer for the execution of control commands. Absolute encoders are attached to all motors (leg, main drive, and Bigfoot) to provide the control computer with information regarding the status of the motors (up-down motion, forward or reverse rotation). Long and short range infrared sensors provide the computer with feedback information regarding the machine's relative position to a series of stripes and reflectors. These infrared sensors simulate how the robot might sense and gain information about the environment of Mars

Cable-Driven Actuation for Highly Dynamic Robotic Systems

This paper presents design and experimental evaluations of an articulated robotic limb called Capler-Leg. The key element of Capler-Leg is its single-stage cable-pulley transmission combined with a high-gap radius motor. Our cable-pulley system is designed to be as light-weight as possible and to additionally serve as the primary cooling element, thus significantly increasing the power density and efficiency of the overall system. The total weight of active elements on the leg, i.e. the stators and the rotors, contribute more than 60% of the total leg weight, which is an order of magnitude higher than most existing robots. The resulting robotic leg has low inertia, high torque transparency, low manufacturing cost, no backlash, and a low number of parts. Capler-Leg system itself, serves as an experimental setup for evaluating the proposed cable- pulley design in terms of robustness and efficiency. A continuous jump experiment shows a remarkable 96.5 % recuperation rate, measured at the battery output. This means that almost all the mechanical energy output used during push-off returned back to the battery during touch-down

Controlled Ecological Life Support Systems (CELSS) conceptual design option study

Results are given of a study to explore options for the development of a Controlled Ecological Life Support System (CELSS) for a future Space Station. In addition, study results will benefit the design of other facilities such as the Life Sciences Research Facility, a ground-based CELSS demonstrator, and will be useful in planning longer range missions such as a lunar base or manned Mars mission. The objectives were to develop weight and cost estimates for one CELSS module selected from a set of preliminary plant growth unit (PGU) design options. Eleven Space Station CELSS module conceptual PGU designs were reviewed, components and subsystems identified and a sensitivity analysis performed. Areas where insufficient data is available were identified and divided into the categories of biological research, engineering research, and technology development. Topics which receive significant attention are lighting systems for the PGU, the use of automation within the CELSS system, and electric power requirements. Other areas examined include plant harvesting and processing, crop mix analysis, air circulation and atmosphere contaminant flow subsystems, thermal control considerations, utility routing including accessibility and maintenance, and nutrient subsystem design

Rapid inversion: running animals and robots swing like a pendulum under ledges.

Escaping from predators often demands that animals rapidly negotiate complex environments. The smallest animals attain relatively fast speeds with high frequency leg cycling, wing flapping or body undulations, but absolute speeds are slow compared to larger animals. Instead, small animals benefit from the advantages of enhanced maneuverability in part due to scaling. Here, we report a novel behavior in small, legged runners that may facilitate their escape by disappearance from predators. We video recorded cockroaches and geckos rapidly running up an incline toward a ledge, digitized their motion and created a simple model to generalize the behavior. Both species ran rapidly at 12-15 body lengths-per-second toward the ledge without braking, dove off the ledge, attached their feet by claws like a grappling hook, and used a pendulum-like motion that can exceed one meter-per-second to swing around to an inverted position under the ledge, out of sight. We discovered geckos in Southeast Asia can execute this escape behavior in the field. Quantification of these acrobatic behaviors provides biological inspiration toward the design of small, highly mobile search-and-rescue robots that can assist us during natural and human-made disasters. We report the first steps toward this new capability in a small, hexapedal robot

Design Concepts for a Hybrid Swimming and Walking Vehicle

AbstractThis paper describes the design and proposed control methods for a 6-legged swimming and walking robot that can be used in a variety of different transportation and equipment control applications above ground, under water and above water. Known as the TURTLE (Tele–operated Unmanned Robot for Telemetry and Legged Exploration), a prototype of this mobile robot is currently being designed and developed for experimental testing in the near future. It will be powered by rechargeable electric batteries (to be recharged by solar panels) and all of its actuators will be electric motors, each controlled and monitored by onboard microcontrollers supervised by an onboard master computer. The TURTLE will be fitted with several high-resolution digital cameras, 3D laser and sonar scanners, an IMU (Inertial Management Unit), electronic compass, GPS (satellite navigation) module, underwater sonar transceiver hardware and two or more types of long-distance wireless communications hardware. The first prototype of the TURTLE will focus on basic tasks such as remote video surveillance, 3D terrain surface scanning (above ground and underwater), basic swimming styles, basic walking styles, climbing over large rocks and walking over very rough ground and steep terrain. This paper describes the main objectives, basic performance specifications, functions and mechanical design solutions that have been developed so far for this project. It covers details of the various different swimming modes and feasible solutions for achieving the main design objectives

Force Measurement of Basilisk Lizard Running on Water

abstract: Basilisk lizards are often studied for their unique ability to run across the surface of water. Due to the complicated fluid dynamics of this process, the forces applied on the water’s surface cannot be measured using traditional methods. This thesis presents a novel technique of measuring the forces using a fluid dynamic force platform (FDFP), a light, rigid box immersed in water. This platform, along with a motion capture system, can be used to characterize the kinematics and dynamics of a basilisk lizard running on water. This could ultimately lead to robots that can run on water in a similar manner.Dissertation/ThesisMasters Thesis Mechanical Engineering 201